Abrasion Resistance Evaluation Method for High-Density Polyethylene Jackets Used on Small Diameter Submarine Cables

1993 ◽  
Author(s):  
Kevin G. Booth
Keyword(s):  
Abrasion Resistance ◽  
High Density Polyethylene ◽  
Evaluation Method ◽  
Small Diameter ◽  
High Density ◽  
Resistance Evaluation ◽  
Submarine Cables

scholarly journals Modeling benzene permeation through drinking water high density polyethylene (HDPE) pipes

2015 ◽  
Vol 13 (3) ◽  
pp. 758-772 ◽  
Author(s):  
Feng Mao ◽  
Say Kee Ong ◽  
James A. Gaunt
Keyword(s):  
Drinking Water ◽  
High Density Polyethylene ◽  
Distribution Systems ◽  
Water Distribution ◽  
Large Diameter ◽  
Small Diameter ◽  
High Density ◽  
Ethyl Benzene ◽  
Constant Input ◽  
Hdpe Pipes

Organic compounds such as benzene, toluene, ethyl benzene and o-, m-, and p-xylene from contaminated soil and groundwater may permeate through thermoplastic pipes which are used for the conveyance of drinking water in water distribution systems. In this study, permeation parameters of benzene in 25 mm (1 inch) standard inside dimension ratio (SIDR) 9 high density polyethylene (HDPE) pipes were estimated by fitting the measured data to a permeation model based on a combination of equilibrium partitioning and Fick's diffusion. For bulk concentrations between 6.0 and 67.5 mg/L in soil pore water, the concentration-dependent diffusion coefficients of benzene were found to range from 2.0 × 10−9 to 2.8 × 10−9cm2/s while the solubility coefficient was determined to be 23.7. The simulated permeation curves of benzene for SIDR 9 and SIDR 7 series of HDPE pipes indicated that small diameter pipes were more vulnerable to permeation of benzene than large diameter pipes, and the breakthrough of benzene into the HDPE pipe was retarded and the corresponding permeation flux decreased with an increase of the pipe thickness. HDPE pipes exposed to an instantaneous plume exhibited distinguishable permeation characteristics from those exposed to a continuous source with a constant input. The properties of aquifer such as dispersion coefficients (DL) also influenced the permeation behavior of benzene through HDPE pipes.

Composition and Surface Topography Effects on Apatite-Forming Ability of Ceramic-Polymer Composites

2003 ◽  
Vol 774 ◽  
Author(s):  
Susan M. Rea ◽  
Serena M. Best ◽  
William Bonfield
Keyword(s):  
Surface Topography ◽  
High Density Polyethylene ◽  
High Density ◽  
Apatite Layer ◽  
Biologically Active ◽  
Human Blood Plasma ◽  
Apatite Formation ◽  
Polyethylene Matrix ◽  
Composite Surface ◽  
X Ray

AbstractHAPEXTM (40 vol% hydroxyapatite in a high-density polyethylene matrix) and AWPEX (40 vol% apatite-wollastonite glass ceramic in a high density polyethylene matrix) are composites designed to provide bioactivity and to match the mechanical properties of human cortical bone. HAPEXTM has had clinical success in middle ear and orbital implants, and there is great potential for further orthopaedic applications of these materials. However, more detailed in vitro investigations must be performed to better understand the biological interactions of the composites and so the bioactivity of each material was assessed in this study. Specifically, the effects of controlled surface topography and ceramic filler composition on apatite layer formation in acellular simulated body fluid (SBF) with ion concentration similar to those of human blood plasma were examined. Samples were prepared as 1 cm × 1 cm × 1 mm tiles with polished, roughened, or parallel-grooved surface finishes, and were incubated in 20 ml of SBF at 36.5 °C for 1, 3, 7, or 14 days. The formation of a biologically active apatite layer on the composite surface after immersion was demonstrated by thin-film x-ray diffraction (TF-XRD), environmental scanning electron microscopy (ESEM) imaging and energy dispersive x-ray (EDX) analysis. Variations in sample weight and solution pH over the period of incubation were also recorded. Significant differences were found between the two materials tested, with greater bioactivity in AWPEX than HAPEXTM overall. Results also indicate that within each material the surface topography is highly important, with rougher samples correlated to earlier apatite formation.

Sign in / Sign up

Export Citation Format

Share Document