Comparison of LBOD, DE-1006A, & Conventional Propylene Glycol-Based Aircraft Deicing Fluids in Terms of Potential Environmental Benefits

2008 ◽  
Author(s):  
Dean Mericas ◽  
Tad Slawecki ◽  
Peter Klaver ◽  
David Dilks ◽  
Christopher Cieciek
Keyword(s):  
Propylene Glycol ◽  
Environmental Benefits ◽  
Aircraft Deicing Fluids

Soil Biodegradation of Propylene Glycol Based Aircraft Deicing Fluids

1999 ◽  
Vol 71 (4) ◽  
pp. 459-464 ◽  
Author(s):  
David S. Bausmith ◽  
Ronald D. Neufeld
Keyword(s):  
Propylene Glycol ◽  
Soil Biodegradation ◽  
Aircraft Deicing Fluids

Molecular dynamics of poly(propylene) glycol in nanometer confinements

2000 ◽  
Vol 10 (PR7) ◽  
pp. Pr7-271-Pr7-274 ◽  
Author(s):  
A. Schönhals ◽  
H. Goering ◽  
K.-W. Brzezinka ◽  
Ch. Schick
Keyword(s):  
Molecular Dynamics ◽  
Propylene Glycol ◽  
Poly Propylene

Environmental Benefits of Precision Agriculture Adoption

2020 ◽  
pp. 637-656 ◽  
Author(s):  
Marco Medici ◽  
Søren Marcus Pedersen ◽  
Giacomo Carli ◽  
Maria Rita Tagliaventi
Keyword(s):  
Environmental Impacts ◽  
Precision Agriculture ◽  
New Technologies ◽  
Environmental Benefits ◽  
Herbicide Application ◽  
Pesticide Application ◽  
Policy Makers ◽  
Application Rates ◽  
Biodiversity Policy ◽  
Lime Application

The purpose of this study is to analyse the environmental benefits of precision agriculture technology adoption obtained from the mitigation of negative environmental impacts of agricultural inputs in modern farming. Our literature review of the environmental benefits related to the adoption of precision agriculture solutions is aimed at raising farmers' and other stakeholders' awareness of the actual environmental impacts from this set of new technologies. Existing studies were categorised according to the environmental impacts of different agricultural activities: nitrogen application, lime application, pesticide application, manure application and herbicide application. Our findings highlighted the effects of the reduction of input application rates and the consequent impacts on climate, soil, water and biodiversity. Policy makers can benefit from the outcomes of this study developing an understanding of the environmental impact of precision agriculture in order to promote and support initiatives aimed at fostering sustainable agriculture.

Environmental benefits of magnesium hydroxide-based peroxide bleaching of mechanical pulp – mill results

TAPPI Journal ◽  
2013 ◽  
Vol 12 (6) ◽  
pp. 9-15 ◽  
Author(s):  
TOMI HIETANEN ◽  
JUHA TAMPER ◽  
KAJ BACKFOLK
Keyword(s):  
Sodium Hydroxide ◽  
Magnesium Hydroxide ◽  
Oxygen Demand ◽  
Pulp Mill ◽  
Transition Metal Ions ◽  
Environmental Benefits ◽  
Raw Material ◽  
Paper Machine ◽  
High Brightness ◽  
Peroxide Bleaching

The use of a new, technical, high-purity magnesium hydroxide-based peroxide bleaching additive was evaluated in full mill-scale trial runs on two target brightness levels. Trial runs were conducted at a Finnish paper mill using Norwegian spruce (Picea abies) as the raw material in a conventional pressurized groundwood process, which includes a high-consistency peroxide bleaching stage. On high brightness grades, the use of sodium-based additives cause high environmental load from the peroxide bleaching stage. One proposed solution to this is to replace all or part of the sodium hydroxide with a weaker alkali, such as magnesium hydroxide. The replacement of traditional bleaching additives was carried out stepwise, ranging from 0% to 100%. Sodium silicate was dosed in proportion to sodium hydroxide, but with a minimum dose of 0.5% by weight on dry pulp. The environmental effluent load from bleaching of both low and high brightness pulps was significantly reduced. We observed a 35% to 48% reduction in total organic carbon (TOC), 37% to 40% reduction in chemical oxygen demand (COD), and 34% to 60% reduction in biological oxygen demand (BOD7) in the bleaching effluent. At the same time, the target brightness was attained with all replacement ratios. No interference from transition metal ions in the process was observed. The paper quality and paper machine runnability remained good during the trial. These benefits, in addition to the possibility of increasing production capacity, encourage the implementation of the magnesium hydroxide-based bleaching concept.

Hydrogenolysis of glucose and fructose in glycol solutions over CuO-MgO-ZrO2 catalyst

2020 ◽  
pp. 48-55
Author(s):  
M.E. Sharanda ◽  
◽  
E.A. Bondarenko ◽  
Keyword(s):  
Ethylene Glycol ◽  
Propylene Glycol ◽  
Flow Reactor ◽  
General Trend ◽  
Raw Materials ◽  
Reaction Products ◽  
Renewable Raw Materials ◽  
High Partial Pressure ◽  
Zro2 Catalyst ◽  
Phase Process

Ethylene glycol and propylene glycol are important representatives of polyols. On an industrial scale, they are obtained from petrochemical raw materials. Within a decade, significant efforts were made for the producing of polyols from biologically renewable raw materials - carbohydrates. The general trend for carbohydrate hydrogenolysis includes application of liquid-phase process with the use of modified metal-oxide catalysts, at 120-120 ° C and pressure of 3MPa or above. So high pressure is used for the reason to increase hydrogen solubility, and also due to the high partial pressure of low boiling solvents. We supposed that usage of high boiling solvents could allow hydrogenolysis to be performed at the lower pressure. Ethylene glycol and propylene glycol are of particular interest as such kind of solvent since they are both the main products of glucose hydrogenolysis. In this work, the process of hydrogenolysis of glucose and fructose over Cu / MgO-ZrO2 catalyst have been studied at temperature range of 160-200 °C and a pressure of 0.1-0.3 MPa in a flow reactor. The solvents were simultaneously the target products of the reaction - ethylene glycol and / or propylene glycol. Gas chromatography and 13C NMR were used for the reaction products identification. It was found that the solubility of glucose in propylene glycol is 21 % by weight, and in ethylene glycol 62% by weight. It was pointed out that the process of hydrogenolysis can take place at a pressure close to atmospheric. Under these conditions, the conversion of hexoses reaches 96-100 %. The reaction products are preferably propylene glycol and ethylene glycol. The total selectivity for C3-2 polyols is 90-94 %, that is higher than in the hydrogenolysis of glucose in aqueous solution.

Study on Environmental Benefits and Losse s of a Solar Photovoltaic Power Generation Project on Forestland

2019 ◽  
Vol 10 (4) ◽  
pp. 317-324
Author(s):  
Young hwan Kim ◽  
Dong hoon Yoo ◽  
Hee Han ◽  
Jae soo Bae
Keyword(s):  
Power Generation ◽  
Environmental Benefits ◽  
Solar Photovoltaic ◽  
Photovoltaic Power
Sign in / Sign up

Export Citation Format

Share Document