System analysis of modeling the accuracy of joint measurement of two information parameters of a signal

2021 ◽  
pp. 91-103
Author(s):  
В.И. Воловач
Keyword(s):  
System Analysis ◽  
Time Of Arrival ◽  
Joint Measurement ◽  
Useful Signal ◽  
Additive Interference ◽  
Accuracy Of Measurement ◽  
Multiplicative Interference

Проведен системный анализ влияния мультипликативных помех, действующих одновременного с аддитивными помехами, на точность измерения двух информационных параметров полезного сигнала. Получены зависимости влияния мультипликативных помех на точность измерения частоты и времени прихода радиоимпульсов . The system analysis of the influence of multiplicative interference acting simultaneously with additive interference on the accuracy of measurement of two information parameters of the useful signal is carried out. The dependences of the influence of multiplicative interference on the accuracy of measuring the frequency and time of arrival of radio pulses are obtained.

Accuracy of measuring the frequency and time of arrival of a useful signal in aviation and space-rocket radio systems at presence of additive and multiplicative interference with low level

2021 ◽  
pp. 3-15
Author(s):  
В.М. Артюшенко ◽  
В.И. Воловач
Keyword(s):  
Frequency Measurement ◽  
Signal Frequency ◽  
Time Of Arrival ◽  
Low Level ◽  
Energy Parameters ◽  
Space Rocket ◽  
Useful Signal ◽  
Additive Interference ◽  
Accuracy Of Measurement ◽  
Multiplicative Interference

Произведена оценка влияния флуктуационных стационарных мультипликативных помех, действующих одновременного с аддитивными помехами, на точность измерения неэнергетических параметров информационных сигналов. Показано, что мультипликативная помеха низкого уровня оказывает более сильное влияние на точность измерения времени прихода, чем на точность измерения частоты полезного сигнала. Осуществлена количественная оценка влияния мультипликативной помехи на точность измерения неэнергетических параметров полезного сигнала. The influence of fluctuating stationary multiplicative interference acting simultaneously with additive interference on the accuracy of measurement of non-energy parameters of information signals is estimated. It is shown that low-level multiplicative interference has a stronger effect on the accuracy of the arrival time measurement than on the accuracy of the useful signal frequency measurement. A quantitative assessment of the effect of multiplicative interference on the accuracy of measurement of non-energy parameters of the useful signal is carried out.

Accuracy of measurement of the signal information parameter in aviation and space-rocket radio systems in the presence of additive and multiplicative interference with a low level

2020 ◽  
pp. 3-12
Author(s):  
В.М. Артюшенко ◽  
В.И. Воловач
Keyword(s):  
Low Level ◽  
Energy Parameters ◽  
Space Rocket ◽  
Useful Signal ◽  
Information Parameter ◽  
Additive Interference ◽  
Accuracy Of Measurement ◽  
Radio Systems ◽  
Multiplicative Interference

Рассмотрено и проанализировано влияние флуктуационных стационарных мультипликативных помех, действующих одновременного с аддитивными помехами, на точность измерения неэнергетических параметров информационных сигналов. Показано, что при низком уровне мультипликативных и аддитивных помех оценка одного параметра полезного сигнала оказывается несмещенной, а ее дисперсия представляет сумму двух слагаемых, первое учитывает влияние аддитивных помех, второе - мультипликативных. Наиболее опасными являются медленные мультипликативные помехи. The influence of fluctuating stationary multiplicative interference acting simultaneously with additive interference on the accuracy of measurement of non-energy parameters of information signals is considered and analyzed. It is shown that at a low level of multiplicative and additive interference, the estimation of one parameter of the useful signal is unbiased, and its dispersion is the sum of two terms, the first takes into account the influence of additive interference, the second - multiplicative. Slow multiplicative interference is the most dangerous.

Accuracy of measurement of the signal information parameter in aviation and space-rocket radio systems in the presence of additive and multiplicative interference with a low level

2020 ◽  
pp. 24-34 ◽  
Author(s):  
В.М. Артюшенко ◽  
В.И. Воловач
Keyword(s):  
Low Level ◽  
Energy Parameters ◽  
Space Rocket ◽  
Useful Signal ◽  
Information Parameter ◽  
Additive Interference ◽  
Accuracy Of Measurement ◽  
Radio Systems ◽  
Multiplicative Interference

Рассмотрено и проанализировано влияние флуктуационных стационарных мультипликативных помех, действующих одновременного с аддитивными помехами, на точность измерения неэнергетических параметров информационных сигналов. Показано, что при низком уровне мультипликативных и аддитивных помех оценка одного параметра полезного сигнала оказывается несмещенной, а ее дисперсия представляет сумму двух слагаемых, первое учитывает влияние аддитивных помех, второе - мультипликативных. Наиболее опасными являются медленные мультипликативные помехи. The influence of fluctuating stationary multiplicative interference acting simultaneously with additive interference on the accuracy of measurement of non-energy parameters of information signals is considered and analyzed. It is shown that at a low level of multiplicative and additive interference, the estimation of one parameter of the useful signal is unbiased, and its dispersion is the sum of two terms, the first takes into account the influence of additive interference, the second - multiplicative. Slow multiplicative interference is the most dangerous.

Accuracy of measurement of the signal information parameter in aviation and space-rocket radio systems in the presence of additive and multiplicative interference with a low level. Part 2 (Examples of frequency and arrival time measurements useful signal)

2020 ◽  
pp. 14-26
Author(s):  
В.М. Артюшенко ◽  
В.И. Воловач
Keyword(s):  
Arrival Time ◽  
Frequency Measurement ◽  
Signal Frequency ◽  
Low Level ◽  
Energy Parameters ◽  
Space Rocket ◽  
Useful Signal ◽  
Additive Interference ◽  
Accuracy Of Measurement ◽  
Multiplicative Interference

Произведена оценка влияния флуктуационных стационарных мультипликативных помех, действующих одновременного с аддитивными помехами, на точность измерения неэнергетических параметров информационных сигналов. Показано, что мультипликативная помеха низкого уровня оказывает более сильное влияние на точность измерения времени прихода, чем на точность измерения частоты полезного сигнала. Осуществлена количественная оценка влияния мультипликативной помехи на точность измерения неэнергетических параметров полезного сигнала. The influence of fluctuating stationary multiplicative interference acting simultaneously with additive interference on the accuracy of measurement of non-energy parameters of information signals is estimated. It is shown that low-level multiplicative interference has a stronger effect on the accuracy of the arrival time measurement than on the accuracy of the useful signal frequency measurement. A quantitative assessment of the effect of multiplicative interference on the accuracy of measurement of non-energy parameters of the useful signal is carried out.

Accuracy of measurement of the signal information parameter tracking meter in the aviation and space rocket industry technology against the background of additive and multiplicative interference. The steepness of the discriminatory specifications. Part I

2021 ◽  
pp. 26-37
Author(s):  
В.М. Артюшенко ◽  
В.И. Воловач
Keyword(s):  
Discrimination Characteristic ◽  
Space Rocket ◽  
Information Parameter ◽  
Parameter Tracking ◽  
Additive Interference ◽  
Accuracy Of Measurement ◽  
Multiplicative Interference

Рассмотрено и проанализировано влияние мультипликативных помех, действующих одновременного с аддитивными помехами, на точность измерения одного информационного параметра следящим измерителем. Проанализирована крутизна дискриминационной характеристики следящего измерителя . The influence of multiplicative interference acting simultaneously with additive interference on the accuracy of measurement of a single information parameter by a tracking meter is considered and analyzed. The steepness of the discrimination characteristic of the tracking meter is analyzed.

Ccuracy of measurement of the information parameter of the signal by a tracking meter in aviation and rocket and space technology against the background of additive and multiplicative interference. The spectral density of the discriminator output signal. Part II

2021 ◽  
pp. 3-10
Author(s):  
В.М. Артюшенко ◽  
В.И. Воловач
Keyword(s):  
Spectral Density ◽  
Output Signal ◽  
Space Technology ◽  
Information Parameter ◽  
Additive Interference ◽  
Accuracy Of Measurement ◽  
Multiplicative Interference

Рассмотрено и проанализировано влияние мультипликативных помех, действующих одновременного с аддитивными помехами, на точность измерения одного информационного параметра следящим измерителем. Проанализирована спектральная плотность выходного сигнала дискриминатора . The influence of multiplicative interference acting simultaneously with additive interference on the accuracy of measurement of one information parameter by a tracking meter is considered and analyzed. The spectral density of the discriminator output signal is analyzed .

System analysis of the assessment of the influence of multiplicative interference on the Conditions signal resolutions based on statistical criteria using mathematical modeling

2020 ◽  
pp. 82-95
Author(s):  
В.И. Воловач
Keyword(s):  
Mathematical Modeling ◽  
Frequency Shift ◽  
Delay Time ◽  
System Analysis ◽  
Statistical Characteristics ◽  
Statistical Criterion ◽  
Multiplicative Interference ◽  
Statistical Criteria

Проведен системный анализ влияния мультипликативных помех на условия разрешения сигналов на основе статистического критерия с помощью математического моделирования. Показано, что интервалы разрешения по времени запаздывания и частотному сдвигу при известных статистических характеристиках сигналов, аддитивных и мультипликативных помех однозначно определяются вероятностями правильного и ложного разрешения. A system analysis of the influence of multiplicative interference on the signal resolution conditions based on a statistical criterion using mathematical modeling is performed. It is shown that the resolution intervals for delay time and frequency shift with known statistical characteristics of signals, additive and multiplicative interference are uniquely determined by the probabilities of correct and false resolution.

scholarly journals Analisis Sistem Antrian Pada Pelayanan Poli Jantung RSUD Kota Langsa

2021 ◽  
Vol 3 (2) ◽  
pp. 297-308
Author(s):  
Fazrina Saumi ◽  
◽  
Rizki Amalia ◽  
Amelia Amelia ◽  
Nurviana Nurviana
Keyword(s):  
Waiting Time ◽  
System Analysis ◽  
Single Channel ◽  
Time Of Arrival ◽  
City Hospital ◽  
Length Of Service ◽  
Queue System ◽  
Hospital Design ◽  
Number Of Patients ◽  
First In First Out

Queuing is an activity where parties are waiting to get service. A queuing process starts from the time of arrival to the time of service. Queuing problems are often encountered in everyday life, including in Langsa City Hospital, especially in the cardiac clinic, which has the most patients. The majority of patients in the queue system are elderly (elderly), so good service is needed considering the physical condition of patients who have entered a vulnerable age. The queuing system analysis aims to determine the average number of patients waiting in the system and the length of service at the heart clinic of Langsa City Hospital. In addition, the queue system analysis can help the Langsa City Hospital design an operational service system so that the service process can run optimally. The queue structure model used is a single channel-single phase with the discipline type First In First Out (FIFO). From the queue model analysis results obtained, the cardiac poly care system has an average number of patients waiting at most occurs in the period 08.00-10.00, namely 14 people with a waiting time of about 56.28 minutes. This time is the busy working hour at cardiac poly with a busyness rate of 93%. From the simulation results with two servers using the same model, a busy rate of 50% was obtained with a reduction in the number of people waiting by 12.8 people with a waiting time of about 1.2 minutes.

Measurement System Analysis of VS Lite

2014 ◽  
Vol 680 ◽  
pp. 447-450
Author(s):  
Ghazirah Mustapha ◽  
M. Saiful Aizat Shafie ◽  
Nur Hayati M. Yahaya ◽  
Jamaluddin Mahmud
Keyword(s):  
Measurement Error ◽  
Total Variation ◽  
Measurement System ◽  
System Analysis ◽  
Measurement System Analysis ◽  
Accuracy Of Measurement ◽  
Repeatability And Reproducibility ◽  
Analysis System ◽  
Replicate Measurements ◽  
User Friendly

Virtual Sensei Lite (VS Lite) is an inexpensive user-friendly motion analysis system. As an alternative motion capture system, it is a must for VS Lite’s user to assess the accuracy of the measurement system capability. To date, such analysis to observe the reliability and accuracy of VS Lite has not been reported. Therefore, this study proposes a procedure for assessing the accuracy and capability of the Virtual Sensei Lite using ANOVA Gage Repeatability and Reproducibility (Gage R&R) designed experiments. In this procedure, a gage R&R study is conducted to obtain replicate measurements on nine parts by three operators. The total variation due to measurement error is then observed to identify the accuracy of measurement. The study able to demonstrate on the accuracy of VS Lite as the value of total variation due to measurement error is within 10%-30%.

Sign in / Sign up

Export Citation Format

Share Document