scholarly journals The Effect Of Silver Diamine Fluoride On Bond Strength of Universal Adhesive To Demineralized Dentin

2020 ◽  
Vol 20 (4) ◽  
pp. 30-37
Keyword(s):  
Bond Strength ◽  
Universal Adhesive ◽  
Silver Diamine Fluoride ◽  
Demineralized Dentin

scholarly journals Does surface treatment of demineralized dentin impact on shear bond strength?

2021 ◽  
Vol 6 (2) ◽  
pp. 023-028
Author(s):  
Fatemeh Rezaei ◽  
Atefeh Nemati-Karimooy ◽  
Horieh Moosavi
Keyword(s):  
Bond Strength ◽  
Laser Irradiation ◽  
Shear Bond Strength ◽  
Surface Treatments ◽  
Universal Adhesive ◽  
Yag Laser ◽  
Group 4 ◽  
Human Dentin ◽  
Group 2 ◽  
Demineralized Dentin

Aim: This study investigated the effect of various surface treatments on the bond strength of a universal adhesive to demineralized dentin. Materials and Methods: Human dentin surfaces of forty-eight carries-free maxillary premolars were prepared and demineralized by acidic solutions. Teeth were randomly distributed into four groups (n=12) getting different surface treatments. Three minutes application of a CPP‑ACP (group 1), Er: YAG laser irradiation (group 2), Er: YAG laser irradiation combined with three minutes application of CPP‑ACP (group 3), no treatment (group 4). Thereafter composite tube (Filtek TM Ultimate, 3M ESPE) bonded to the testing surfaces via universal adhesive; Single Bond Universal and the Shear Bond Strength (SBS) measured. Data were analyzed utilizing ANOVA and Tukey tests (P<0.05). Results: Only application of CPP-ACP and Er: YAG laser radiation, resulted in the highest and lowest SBS respectively (p<0.001). Bond strength after irradiation of Er: YAG laser combined with three minutes application of CPP‑ACP was a little more than laser alone. Conclusion: The application of CPP-ACP could increase the SBS of universal adhesives used to demineralized dentin. Laser irradiation application has an adverse effect on SBS.

scholarly journals Interaction of storage medium and silver diamine fluoride on demineralized dentin

2021 ◽  
Vol 49 (2) ◽  
pp. 030006052098533
Author(s):  
Jing-Yuan Peng ◽  
Michael George Botelho ◽  
Jukka Pekka Matinlinna ◽  
Hao-Bo Pan ◽  
Edwin Kukk ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Silver Chloride ◽  
Metallic Silver ◽  
Storage Medium ◽  
Silver Diamine Fluoride ◽  
X Ray ◽  
Whole Saliva ◽  
Demineralized Dentin ◽  
Scanning Electron

Objective The effects of saliva on demineralized dentin and silver diamine fluoride (SDF) were investigated in vitro. Methods Dentin samples stored in deionized water (DIW), buffer solution (BS), basal medium mucin (BMM), and unstimulated whole saliva (UWS) were demineralized for 3 days and immersed in the same storage media. SDF as a 38 mass% solution was applied to the dentin samples for 3 minutes after they had been replaced in their respective medium. Surfaces were analyzed by scanning electron microscopy, energy-dispersive X-ray analysis (EDX), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). Results Scanning electron microscopy showed various surface deposits and coatings, including occlusion of dentinal tubules. DIW resulted in the thinnest coating, whereas BMM resulted in the thickest. EDX and XPS showed the formation of metallic silver and silver compounds in all four media, with the greatest formation in BS. XRD indicated that the main product was silver chloride except in DIW. Sulphur was found in BMM and UWS. EDX and XPS detected fluoride and XRD detected calcium fluoride and fluorohydroxyapatite in BS, BMM, and UWS. Conclusion The interaction between SDF and demineralized dentin was dependent upon the storage medium. BMM provided an outcome most similar to human saliva.

scholarly journals To Evaluate Shear Bond Strength of Resin Composite to Theracal Lc, Biodentine, and Resin–Modified Glass Ionomer Cement and Mode of Fracture: An In Vitro Study

2020 ◽  
Vol 8 (02) ◽  
pp. 49-54
Author(s):  
Salil Mehra ◽  
Ashu K. Gupta ◽  
Bhanu Pratap Singh ◽  
Mandeep Kaur ◽  
Ashwath Kumar
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Glass Ionomer Cement ◽  
Bonding Agent ◽  
Glass Ionomer ◽  
Universal Adhesive ◽  
Resin Modified Glass Ionomer ◽  
Ionomer Cement

Abstract Introduction The aim of the current study was to evaluate shear bond strength of resin composite bonded to Theracal LC, Biodentine, and resin-modified glass ionomer cement (RMGIC) using universal adhesive and mode of fracture. Materials and Methods A total of 50 caries-free maxillary and mandibular molars extracted were taken; occlusal cavities were prepared, mounted in acrylic blocks, and divided into five groups based on the liner used. Group 1: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 12 minutes. Group 2: Biodentine liner placed into the cavity and bonding agent and resin composite applied after 14 days. Group 3: RMGIC liner placed into the cavity and bonding agent and resin composite applied immediately. Group 4: RMGIC liner placed into the cavity and bonding agent and resin composite applied after 7 days. Group 5: Theracal LC liner placed into the cavity and bonding agent and resin composite applied immediately. Each sample was bonded to resin composite using universal adhesive. Shear bond strength analysis was performed at a cross-head speed of 0.1 mm/min. Statistical Analysis  Statistical analysis was performed with one-way analysis of variance and posthoc Bonferroni test using SPSS version 22.0. Results and Conclusion Biodentine liner when bonded immediately to resin composite showed minimum shear bond strength. RMGIC when bonded to resin composite after 7 days showed maximum shear bond strength. Mode of fracture was predominantly cohesive in groups having Biodentine and Theracal LC as liner.

Effect of Different Protocols in Preconditioning With EDTA in Sclerotic Dentin and Enamel Before Universal Adhesives Applied in Self-etch Mode

2017 ◽  
Vol 42 (3) ◽  
pp. 284-296 ◽  
Author(s):  
EC Martini ◽  
SO Parreiras ◽  
MF Gutierrez ◽  
AD Loguercio ◽  
A Reis
Keyword(s):  
Bond Strength ◽  
Adhesive Systems ◽  
Microtensile Bond Strength ◽  
Universal Adhesive ◽  
Etching Pattern ◽  
Bonding Performance ◽  
Universal Adhesives ◽  
Microshear Bond Strength ◽  
Self Etch ◽  
Main Factor

SUMMARY Objectives: The aim of this study was to investigate the effect of different protocols of 17% ethylene diamine tetra-acetic acid (EDTA) conditioning on the etching pattern and immediate bond strength of universal adhesives to enamel and sclerotic dentin. Methods and Materials: Forty bovine teeth with sclerotic dentin and 20 human third molars were randomly divided into eight groups resulting from the combination of the main factors surface treatment (none, two-minute EDTA conditioning manual application, 30-second EDTA manual application, 30-second EDTA sonic application) and adhesives systems (Scotchbond Universal Adhesive [SBU] and Prime & Bond Elect [PBE]). Resin-dentin and enamel-dentin bond specimens were prepared and tested under the microtensile bond strength (μTBS) and microshear bond strength (μSBS) tests, respectively. The etching pattern produced on the unground enamel and the sclerotic dentin surfaces under the different protocols and adhesive systems was evaluated under scanning electron microscopy. Results: For enamel, only the main factor adhesive was significant (p&lt;0.0001), with SBU showing the highest μSBS. In sclerotic dentin, the lowest mean was observed for the group without EDTA application and the highest mean in the group with EDTA application with the sonic device for 30 seconds. Regardless of the EDTA protocol, the highest means of μTBS were observed for SBU (p&lt;0.05). Conclusions: EDTA conditioning improves the bonding performance of universal adhesives in the self-etch mode on sclerotic dentin, mainly when applied for 30 seconds with the aid of a sonic device. EDTA pretreatment also improves the retentive etching pattern of enamel, but it does not result in higher enamel bond strength.

scholarly journals Comparative study of the dentin bond strength of a new universal adhesive

2016 ◽  
Vol 35 (4) ◽  
pp. 606-612 ◽  
Author(s):  
Ji-Hyun JANG ◽  
Myoung Geun LEE ◽  
Sang Uk WOO ◽  
Chung Ok LEE ◽  
Jin-Kyu YI ◽  
...  
Keyword(s):  
Bond Strength ◽  
Comparative Study ◽  
Universal Adhesive

scholarly journals Effects of Universal Adhesive on Shear Bond Strength of Resin Cement to Zirconia Ceramic with Different Surface Treatments

2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Zohreh Moradi ◽  
Farnoosh Akbari ◽  
Sara Valizadeh
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
In Vitro Study ◽  
Surface Treatments ◽  
Resin Cement ◽  
Zirconia Ceramic ◽  
Single Bond ◽  
Universal Adhesive

Aim. This study aimed to assess shear bond strength (SBS) of resin cement to zirconia ceramic with different surface treatments by using Single Bond Universal. Methods. In this in vitro study, 50 zirconia discs (2 × 6 mm) were divided into 5 groups of (I) sandblasting with silica-coated alumina (CoJet)  + silane + Single Bond 2, (II) sandblasting with CoJet + Single Bond Universal, (III) sandblasting with alumina + Single Bond Universal, (IV) sandblasting with alumina + Z-Prime Plus, and (V) Single Bond Universal with no surface treatment. Resin cement was applied in plastic tubes (3 × 5 mm2), and after 10,000 thermal cycles, the SBS was measured by a universal testing machine. The mode of failure was determined under a stereomicroscope at × 40 magnification. Data were analyzed using one-way ANOVA. Results. The maximum (6.56 ± 4.29 MPa) and minimum (1.94 ± 1.96 MPa) SBS values were noted in groups III and I, respectively. Group III had the highest frequency of mixed failure (60%). Group V had the maximum frequency of adhesive failure (100%). Conclusion. Single Bond Universal + sandblasting with alumina or silica-coated alumina particles is an acceptable method to provide a strong SBS between resin cement and zirconia.

Sign in / Sign up

Export Citation Format

Share Document