Impact of climate and bulking materials on characteristics of compost from ecological toilets

2012 ◽  
Vol 2 (2) ◽  
pp. 79-86 ◽  
Author(s):  
James W. McKinley ◽  
Rebecca E. Parzen ◽  
Álvaro Mercado Guzmán

Urine-diversion dehydration toilets (UDDT) are common throughout the developing world, and the toilet product is widely used as compost. There is no comprehensive research to date that characterizes the compost to determine its quality, extent of pathogen inactivation, and the effects of climate and bulking materials on the compost. Compost was collected from 45 UDDT in Bolivia and analyzed for physical, chemical, and biological parameters. Eighty percent and 56% of samples did not meet acceptable compost guidelines for moisture content and pH, respectively, indicating desiccation was the dominant process in UDDT. Bulking materials significantly impacted compost characteristics in terms of pH, carbon, carbon-to-nitrogen ratio, and carbon stability (P < 0.05). Composts with ash exhibited, on average, low carbon concentrations (4.9%) and high pH values (9.7), which can be harmful to plants and composting microorganisms. Composts with sawdust exhibited, on average, high carbon concentrations (40.0%) and carbon-to-nitrogen ratios (31.0). Climate had no significant impact on chemical characteristics, however composts from humid regions had significantly higher moisture contents (34.4%) than those from arid climates (24.8%) (P < 0.05). Viable Ascaris lumbricoides ova were identified in 31% of samples, including samples with high pH, low moisture contents, and long storage times.

2020 ◽  
Vol 10 (2) ◽  
pp. 209-218
Author(s):  
D. Naidoo ◽  
C. E. Archer ◽  
S. Septien ◽  
C. C. Appleton ◽  
C. A. Buckley

Abstract Ascaris lumbricoides is the most common helminth of human health importance, and the most resilient helminth found in faecal sludge. There are numerous types of sludge treatments; however, heating and drying are most commonly used for pathogen inactivation. Ascaris suum eggs were heated in a water bath at 40–55 °C for 10 seconds to 60 minutes in water, as well as heated in both urine diversion dry toilet and ventilated improved pit latrine sludge at 40 °C, 60 °C and 80 °C for times ranging from 5 seconds to 120 minutes. Eggs were also spiked into sludges of different moisture contents and incubated over 12 weeks at 25 °C, with samples analysed weekly. Overall, we concluded that eggs were inactivated at temperatures >50 °C, that the temperature–time relationship directly impacted the efficacy of heat treatment, that suspension medium had no effect, and that eggs survived better in wet rather than dry sludges.


RSC Advances ◽  
2020 ◽  
Vol 10 (39) ◽  
pp. 23212-23220
Author(s):  
Jian Xu ◽  
Xiawei Liu ◽  
Jiaolong Huang ◽  
Manqi Huang ◽  
Tao Wang ◽  
...  

Schematic diagram of RDCWs system and proposed mechanisms for nitrate removal.


1991 ◽  
Vol 32 (7) ◽  
pp. 953-958 ◽  
Author(s):  
Shimshon Belkin ◽  
Sammy Boussiba

2018 ◽  
Vol 122 ◽  
pp. 186-195 ◽  
Author(s):  
Maarit Liimatainen ◽  
Carolina Voigt ◽  
Pertti J. Martikainen ◽  
Jyrki Hytönen ◽  
Kristiina Regina ◽  
...  

1990 ◽  
pp. 3235-3242
Author(s):  
Göran Samuelsson ◽  
Kristin Palmqvist ◽  
Zakir Ramazanov ◽  
Lars-Göran Sundblad

Clay Minerals ◽  
1967 ◽  
Vol 7 (1) ◽  
pp. 19-31 ◽  
Author(s):  
F. A. Faruqi ◽  
Susumu Okuda ◽  
W. O. Williamson

AbstractThe chemisorption of methylene blue by kaolinite crystals increased as the aqueous suspensions changed from acid to alkaline because, at high pH values, not only the basal pinacoids but the edge-faces were negatively charged. The inability to calculate acceptable specific surfaces or cation exchange capacities from the chemisorption data is discussed, with special reference to the orientation of adsorbed dye cations, the covering of more than one exchange site by a monomer or polymer, the different concentrations of exchange sites on the basal pinacoids and edge-faces respectively, the possibility that such sites occur on the tetrahedral rather than on the octahedral basal pinacoid, and the incomplete replacement of inorganic cations.


2005 ◽  
Vol 500-501 ◽  
pp. 551-558 ◽  
Author(s):  
A. Ghosh ◽  
Brajendra Mishra ◽  
Subrata Chatterjee

In the present study HSLA steels of varying carbon concentrations, alloyed with Mn, Ni, Cr, Mo, Cu and micro-alloyed with Nb and Ti were subjected to different finish rolling temperatures from 850oC to 750oC in steps of 50oC. The microstructure of the steel predominantly shows martensite. Fine twins, strain induced precipitates in the martensite lath along with e-Cu precipitates are observed in the microstructure. With an increase in carbon content the strength value increases from 1200MPa UTS to 1700MPa UTS with a negligible reduction in elongation. Impact toughness values of 20-26 joules at room temperature and −40oC were obtained in sub-size samples.


Sign in / Sign up

Export Citation Format

Share Document