The fate of peroxyl radicals in aqueous solution

1997 ◽  
Vol 35 (4) ◽  
pp. 9-15 ◽  
Author(s):  
Clemens von Sonntag ◽  
Peter Dowideit ◽  
Fang Xingwang ◽  
Ralf Mertens ◽  
Pan Xianming ◽  
...  

The reactions of peroxyl radicals occupy a central role in oxidative degradation. Under the term Advanced Oxidation Processes in drinking-water and wastewater processing, procedures are summarized that are based on the formation and high reactivity of the OH radical. These react with organic matter (DOC). With O2, the resulting carbon-centered radicals O2 give rise to the corresponding peroxyl radicals. This reaction is irreversible in most cases. An exception is hydroxycyclohexadienyl radicals which are formed from aromatic compounds, where reversibility is observed even at room temperature. Peroxyl radicals with strongly electron-donating substituents eliminate O2.−, those with an OH-group in a-position HO2.. Otherwise organic peroxyl radicals decay bimolecularly. The tetroxides formed in the first step are very short-lived intermediates and decay by various pathways, leading to molecular products (alcohols, ketones, esters and acids, depending on the precursor), or to oxyl radicals, which either fragment by scission of a neighbouring C-C bond or, when they carry an a-hydrogen, undergo a (water-assisted) 1,2-H-shift.

Author(s):  
Nurazim Ibrahim ◽  
Sharifah Farah Fariza Syed Zainal ◽  
Hamidi Abdul Aziz

The presence of hazardous micropollutants in water and wastewater is one of the main concerns in water management system. This micropollutant exists in a low concentration, but there are possible hazards to humans and organisms living in the water. Moreover, its character that is recalcitrant to microbiological degradation makes it difficult to deal with. Advanced oxidation processes (AOPs) are efficient methods to remove low concentration micropollutants. AOPs are a set of processes consisting the production of very reactive oxygen species which able to destroy a wide range of organic compounds. The main principal mechanism in UV-based radical AOP treatment processes is the use ultraviolet light to initiate generation of hydroxyl radicals used to destroy persistent organic pollutants. Therefore, this chapter presents an overview on the principle of radical oxidant species generation and degradation mechanism by various type of UV based AOP in treating contaminants present in water and wastewater. The current application and possible improvement of the technology is also presented in this chapter.


2018 ◽  
Vol 139 ◽  
pp. 118-131 ◽  
Author(s):  
David B. Miklos ◽  
Christian Remy ◽  
Martin Jekel ◽  
Karl G. Linden ◽  
Jörg E. Drewes ◽  
...  

2013 ◽  
Vol 800 ◽  
pp. 555-559
Author(s):  
Xin Liu ◽  
Jin Hong Fan ◽  
Lu Ming Ma

Oxidative degradation of ethylenediaminetetraacetic acid (EDTA) in aqueous solution at room temperature and pressure by the bimetallic Al-Fe/O2 process, which was verified by the addition of benzoic acid as ·OH scavenger and the detection of para-hydroxybenzoic acid, was investigated. The results showed that the removal efficiency of EDTA, TOC and TN could be about 98%, 77.5% and 43% respectively after 3h reaction when the initial pH was 5. The effects of initial pH, concentration of EDTA, mass ratio of Al0 and Fe0 and Al-Fe loading were also investigated. Significantly, the bimetallic Al-Fe process exhibited higher reactivity than monometallic Fe0/Al0 process for the degradation of EDTA when the mass ratio of Al0 and Fe0 ranged from 0.11 to 2.97.


2021 ◽  
Vol 11 (10) ◽  
Author(s):  
Hakimeh Mahdizadeh ◽  
Yousef Dadban Shahamat ◽  
Susana Rodríguez-Couto

AbstractMost synthetic dyes are toxic and hardly biodegradable compounds that enter the environment mainly through the discharged of non-treated textile industry effluents. The present study investigated the removal of the textile monoazo dye Reactive Red 198 (RR-198) from aqueous solutions using the ultraviolet light and ozonation alone and in combination (i.e., UV/O3) followed by a Sequencing Batch Reactor (SBR). The pH (5 ≤ pH ≤ 9) and dye initial concentration (50–300 mg/L) parameters were optimized in the ozonation process at reaction time of 0–60 min. Then, TOC removal and dye discoloration percentage was compared with the O3, UV and O3/UV processes. In order to compare the performance of the SBR in dye discoloration of RR-198 and TOC removal, four types of effluent, including Raw dye, O3-pretreated dye, UV-treated dye and UV/O3-pretreated dye were separately treated in the SBR system. In the ozonation process, by increasing the pH and reducing the initial dye concentration increased the discoloration percentage. The highest dye discoloration percentage and TOC removal obtained in the hybrid UV/O3/SBR process. Combining biological systems and Advanced Oxidation Processes is an appropriate option for the decomposition of resistant pollutants and increasing the biodegradability of these compounds and is applicable in the water and wastewater industry.


Sign in / Sign up

Export Citation Format

Share Document