Design of rural water systems using dynamic models
The properties of main water ways and infrastructure of rural water systems are often determined by very general design methods. These methods are based on standards that use only little information of the actual water system. Most design methods applied in the Netherlands are based on land use and soil texture. Standards have been developed on the basis of generalized properties of water systems. Details of the actual layout of the water system and the way in which that system is controlled, are usually not incorporated. Present-day dynamic simulation programs and the computer power currently available enable more detailed modeling and incorporation of location-specific data into models. Such models can be used to design the water system and can include real data. A model-based design method is introduced, in which the actual situation of the water system is taken into consideration as well as the way in which the water system is controlled. Stochastics concerning the operation and availability of controlling infrastructure are included in the method. Models can be evaluated by including real data. In this way the actual safety of the water system, for example during floods, can be determined. Water-quantity design criteria can be incorporated as well as water-quality criteria. Application of the method makes it possible to design safe water systems in which excess capacities are avoided and in which all requirements of interest are met. The method, called the ‘dynamic design procedure’, can result in considerable savings for water authorities when new systems have to be designed or existing designs have to be reconsidered.