Synthesis and Electrochemical Properties of NiFe-Se/rGO Nanocomposites

2020 ◽  
Vol 13 ◽  
Author(s):  
Rouwei Yan ◽  
Biao Xu ◽  
K. P. Annamalai ◽  
Tianlu Chen ◽  
Zhiming Nie ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Energy Storage ◽  
Synergistic Effects ◽  
Nitrogen Adsorption ◽  
Storage Device ◽  
Energy Storage And Conversion ◽  
Step Method ◽  
Practical Applications ◽  
Device Applications

Background : Renewable energies are in great demand because of the shortage of traditional fossil energy and the associated environmental problems. Ni and Se-based materials are recently studied for energy storage and conversion owing to their reasonable conductivities and enriched redox activities as well as abundance. However, their electrochemical performance is still unsatisfactory for practical applications. Objective: To enhance the capacitance storage of Ni-Se materials via modification of their physiochemical properties with Fe. Methods: A two-step method was carried out to prepare FeNi-Se loaded reduced graphene oxide (FeNi-Se/rGO). In the first step, metal salts and graphene oxide (GO) were mixed under basic condition and autoclaved to obtain hydroxide intermediates. As a second step, selenization process was carried out to acquire FeNi-Se/rGO composites. Results: X-ray diffraction measurements (XRD), nitrogen adsorption at 77K, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were carried out to study the structures, porosities and the morphologies of the composites. Electrochemical measurements revealed that FeNi-Se/rGO notably enhanced capacitance than the NiSe/G composite. This enhanced performance was mainly attributed to the positive synergistic effects of Fe and Ni in the composites, which not only had influence on the conductivity of the composite but also enhanced redox reactions at different current densities. Conclusion: NiFe-Se/rGO nanocomposites were synthesized in a facile way. The samples were characterized physicochemically and electrochemically. NiFeSe/rGO giving much higher capacitance storage than the NiSe/rGO explained that the nanocomposites could be an electrode material for energy storage device applications.

Three-Dimensional Holey-Graphene Architectures for Highly Sensitive Enzymatic Electrochemical Determination of Hydrogen Peroxide

2019 ◽  
Vol 19 (11) ◽  
pp. 7404-7409 ◽  
Author(s):  
Aihua Jing ◽  
Gaofeng Liang ◽  
Hao Shi ◽  
Yixin Yuan ◽  
Quanxing Zhan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Hydrogen Peroxide ◽  
Graphene Oxide ◽  
Three Dimensional ◽  
Electrochemical Determination ◽  
High Specific Surface Area ◽  
3D Graphene ◽  
Practical Applications ◽  
Transmission Electron ◽  
Mild Defect

Three-dimensional (3D) graphene with high specific surface area, excellent conductivity and designed porosity is essential for many practical applications. Herein, holey graphene oxide with nano pores was facilely prepared via a convenient mild defect-etching reaction and then fabricated to 3D nanostructures via a reduction method. Based on the 3D architectures, a novel enzymatic hydrogen peroxide sensor was successfully fabricated. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were used to characterize the 3D holey graphene oxide architectures (3DHGO). Cyclic voltammetry (CV) was used to evaluate the electrochemical performance of 3DHGO at glassy carbon electrode (GCE). Excellent electrocatalytic activity to the reduction of H2O2 was observed, and a linear range of 5.0×10-8~5.0×10-5 M with a detection limit of 3.8×10-9 M was obtained. These results indicated that 3DHGO have potential as electrochemical biosensors.

High-Capacity Derivatives Produced from Hydrolytic Lignin as Electrode Materials for Energy Storage and Conversion

2018 ◽  
Vol 386 ◽  
pp. 359-364
Author(s):  
Yury M. Nikolenko ◽  
Denis P. Opra ◽  
Alexander K. Tsvetnikov ◽  
Alexander Yu. Ustinov ◽  
Valery G. Kuryavyi ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Energy Storage ◽  
Electrode Materials ◽  
Electronic Conductivity ◽  
Specific Capacity ◽  
Energy Storage And Conversion ◽  
Operating Voltage ◽  
X Ray ◽  
Thermally Activated ◽  
Hydrolytic Lignin

The hydrolytic lignin derivatives have been prepared via its physical activation (high-temperature heating in vacuum) followed by chemical modification (fluorination). The obtained products were characterized using scanning electron microscopy, X-ray diffraction, transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. It was found that the graphitized product of thermal activation up to 1000 °C at a low rate of < 2 °C/min under high vacuum shows an enhanced specific surface area (215 m2/g), that makes its potentially useful as sorbent, catalytic substrate or electrode material. To clarify the potentialities of hydrolytic lignin derivatives for energy storage and conversion, the electrochemical system with metallic lithium anode was applied. The galvanostatic discharge of battery at a current density of 100 μA/cm2between 3.0 and 0.5 V shows that the specific capacity of thermally activated derivative is equal to 845 mA·h/g, while the untreated lignin yields only 190 mA·h/g. The improve of the electrochemical performance of product originates from its graphitization, increasing electronic conductivity, and, possibly, enhanced ability to adsorb of oxygen. The fluorination of both the lignin and its thermally activated form results in higher operating voltage of battery, as seems, due to the involvement of fluorine bound to carbon in electrochemical process.

Flower-Like MoS2 for Next-Generation High-Performance Energy Storage Device Applications

2019 ◽  
Vol 25 (6) ◽  
pp. 1394-1400 ◽  
Author(s):  
Sumit Majumder ◽  
Sangam Banerjee
Keyword(s):  
Electron Microscopy ◽  
Energy Storage ◽  
High Performance ◽  
Large Scale ◽  
Electrochemical Impedance ◽  
Coupling Effect ◽  
Storage Device ◽  
Active Surface Area ◽  
Cyclic Voltammogram ◽  
Discharge Current Density

AbstractHere, a well crystalline 3D flower-like structured MoS2 (~420 nm) has been successfully synthesized on a large scale by a simple hydrothermal technique. The evolution of morphology in the formation process has also been investigated. The crystallinity, purity, and morphology of the sample are characterized by powder X-ray diffraction, Fourier-transform infrared spectroscopy, fieldemission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) techniques. The FESEM and TEM images reveal that the sample exhibits a uniform 3D flower-like microsphere shape with folded nanosheets, which are stretched out along the edge of the microsphere. The electrochemical performance of the sample has been investigated by cyclic voltammogram, galvanostatic charge–discharge, and electrochemical impedance spectroscopy studies. The results of the electrochemical analysis suggest that the material delivers a maximum specific capacitance (Csp) of 350 F/g at a discharge current density of 0.25 A/g with energy density 17.5 Wh/kg. It also exhibits good capability and excellent cyclic stability (94% capacity retention after 1,000 cycles in 1 A/g) owing to the coupling effect of electrical conductivity with the interesting morphology and larger active surface area. Hence, the sample may be used as a promising electrode material for high-performance energy storage devices.

Polyaniline-based carbon nanospheres and redox mediator doped robust gel films lead to high performance foldable solid-state supercapacitors

2017 ◽  
Vol 41 (17) ◽  
pp. 9024-9032 ◽  
Author(s):  
Enke Feng ◽  
Hui Peng ◽  
Zhiguo Zhang ◽  
Jindan Li ◽  
Ziqiang Lei
Keyword(s):  
Energy Storage ◽  
Solid State ◽  
Energy Density ◽  
High Performance ◽  
High Energy ◽  
High Energy Density ◽  
Storage Device ◽  
Energy Storage Device ◽  
Carbon Nanospheres ◽  
Device Applications

As-fabricated foldable solid-state supercapacitors are suitable for highly fold-tolerant high-energy-density energy storage device applications.

Sign in / Sign up

Export Citation Format

Share Document