A Rapid Determination Method of Chemical Oxygen Demand in Printing and Dyeing Wastewater Using Ultraviolet Spectroscopy

2009 ◽  
Vol 81 (11) ◽  
pp. 2381-2386 ◽  
Author(s):  
Huoliang Kong ◽  
Huifang Wu
Keyword(s):  
Chemical Oxygen Demand ◽  
Rapid Determination ◽  
Oxygen Demand ◽  
Ultraviolet Spectroscopy ◽  
Determination Method ◽  
Dyeing Wastewater ◽  
Printing And Dyeing Wastewater

A rapid determination method for chemical oxygen demand in aquaculture wastewater using the ultraviolet absorbance spectrum and chemometrics

2014 ◽  
Vol 6 (11) ◽  
pp. 3799-3803 ◽  
Author(s):  
Hong Cao ◽  
Wentai Qu ◽  
Xianglong Yang
Keyword(s):  
Chemical Oxygen Demand ◽  
Rapid Determination ◽  
Oxygen Demand ◽  
Uv Absorbance ◽  
Determination Method ◽  
Absorbance Spectrum ◽  
Fast Determination ◽  
Ultraviolet Absorbance ◽  
Aquaculture Wastewater

The ultraviolet (UV) absorbance spectrum was studied for the fast determination of chemical oxygen demand (COD) in aquaculture wastewater.

Electrochemical oxidative degradation of indigo wastewater based on chlorine-containing system

2020 ◽  
Vol 49 (1) ◽  
pp. 46-54 ◽  
Author(s):  
Wei Zhang ◽  
Weiwei Lv ◽  
Xiaoyan Li ◽  
Jiming Yao
Keyword(s):  
Chemical Oxygen Demand ◽  
Response Surface ◽  
Electrochemical Oxidation ◽  
Surface Analysis ◽  
Removal Rate ◽  
Oxidative Degradation ◽  
Oxygen Demand ◽  
Single Factor ◽  
Dyeing Wastewater ◽  
Content Type

Purpose In this study, the oxidative degradation performance of indigo wastewater based on electrochemical systems was explored. The decolourization degrees, removal rate of chemical oxygen demand and biochemical oxygen demand of the indigo wastewater after degradation were evaluated and optimized treatment conditions being obtained. Design/methodology/approach The single factor method was first used to select the electrolyte system and electrode materials. Then the response surface analysis based on Box–Behnken Design was chosen to determine the influence of four independent variables such as FeCl3 concentration, NaCl concentration, decolourization time and voltage on the degradation efficiency. Findings On the basis of single factor experiment, the electrode material of stainless steel was selected in the double cell, and the indigo wastewater was electrolyzed with FeCl3 and NaCl electrolytes. The process conditions of electrochemical degradation of indigo wastewater were optimized by response surface analysis: the concentration of FeCl3 and NaCl was of 16 and 9 g/L, respectively, with a decolourization time of 50 min, voltage of 10 V and decolourization percentage of 98.94. The maximum removal rate of chemical oxygen demand reached 75.46 per cent. The highest ratio of B/C was 3.77, which was considered to be more biodegradable. Research limitations/implications Dyeing wastewater is bringing out more and more pollution problems to the environment. However, there are some shortcomings in traditional technologies such as adsorption and filtration. As a kind of efficient and clean water treatment technology, electrochemical oxidation has been applied to the treatments of various types of wastewater. The decolourization and degradation of indigo wastewater is taken as an example to provide reference for the treatment of wastewater in actual plants. Practical implications The developed method provided a simple and practical solution for efficiently degrading indigo wastewater. Originality/value The method for the electrochemical oxidation technology was novel and could find numerous applications in the degradation of printing and dyeing wastewater.

Performance and fouling characterization of a five-bore hollow fiber membrane in a membrane bioreactor for the treatment of printing and dyeing wastewater

2016 ◽  
Vol 87 (1) ◽  
pp. 102-109 ◽  
Author(s):  
Chunyan Ma ◽  
Xiaoqian Wu ◽  
Zhenhong Liu
Keyword(s):  
Hollow Fiber ◽  
Membrane Bioreactor ◽  
Hollow Fiber Membrane ◽  
Oxygen Demand ◽  
Dyeing Wastewater ◽  
Fiber Membrane ◽  
Step Method ◽  
Critical Flux ◽  
Printing And Dyeing Wastewater ◽  
Cake Layer

Filtration performance and fouling behavior of a five-bore hollow fiber membrane was investigated in a membrane bioreactor (MBR) treating printing and dyeing wastewater. A normal single-bore hollow fiber membrane module was used in the same bioreactor for comparison. During an operation over 30 days, the results of chemical oxygen demand (COD) and color removals demonstrated that the five-bore membrane was favorable for this wastewater treatment. The critical flux ( Jc) of the five-bore membrane and the single-bore membrane was determined at 21 and 15 L/(m2·h), respectively, using a flux-step method. During a steady running at sub-critical flux of 10 L/(m2·h) without cleaning for 50 days, the average increasing rates of trans-membrane pressure (TMP) for five-bore and single-bore membranes were 0.356 kPa/d and 0.444 kPa/d, respectively, indicating that the five-bore membrane had better fouling resistance. The total resistance values of five-bore membrane and single-bore membrane were 8.68 and 14.1 m−1, respectively. Scanning electron microscope (SEM) and atomic force microscope (AFM) results confirmed the cake layer resistance for five-bore membrane was much lower than single-bore membrane. It was expected that the membrane structure, especially the membrane diameter, influenced the anti-fouling property of five-bore membrane.

Discharge Plasma for the Treatment of Industrial Wastewater

2011 ◽  
Vol 71-78 ◽  
pp. 3075-3078
Author(s):  
Ai Hua Gao ◽  
Shui Jiao Yang ◽  
Shang Bin Hu ◽  
Xiao Qing He ◽  
Zhi Guo Lu
Keyword(s):  
Organic Contaminants ◽  
Atmospheric Pressure ◽  
Industrial Wastewater ◽  
Discharge Plasma ◽  
Oxygen Demand ◽  
Dyeing Wastewater ◽  
Printing And Dyeing Wastewater ◽  
Industrial Wastewaters ◽  
Very High ◽  
Air Discharge

The treatment of industrial wastewaters collected from petrochemical works, gypsum plant, and printing and dyeing mill, was investigated at atmospheric pressure in air discharge plasma. The degradation effects of organic contaminants in water were compared for the printing and dyeing wastewater under different discharging conditions and for the wastewater from the other two plants under the same discharging conditions. The influences of several factors on chemical oxygen demand (COD) remove rate were studied experimentally. The results showed that the treatment effects for the same industrial wastewater differed significant under different discharge conditions. There may be a suitable discharge plasma treatment to specific industrial wastewater. Due to the removal rates of COD of industrial wastewaters with discharge plasma isn’t very high, therefore the discharge plasma water treating needs to combine conventional water treating methods or addition other catalyst to effectively remove organic pollutants in wastewater and obtain the expected treatment effect.

scholarly journals Preparation of Mn/Mg/Ce Ternary Ozone Catalyst and Its Mechanism for the Degradation of Printing and Dyeing Wastewater

2022 ◽  
Vol 9 ◽  
Author(s):  
Shuai Zhang ◽  
Huixue Ren ◽  
Kaifang Fu ◽  
Wenqing Cheng ◽  
Daoji Wu ◽  
...  
Keyword(s):  
Methyl Orange ◽  
Catalytic Oxidation ◽  
Removal Rate ◽  
Dynamic Test ◽  
Oxygen Demand ◽  
Dyeing Wastewater ◽  
Printing And Dyeing Wastewater ◽  
Treatment Conditions ◽  
Nano Alumina ◽  
Catalyst Dosage

The printing and dyeing wastewater produced by different dyes, as well as different printing and dyeing processes, have different components. These wastewater have high toxicity, high organic concentration, and deep chromaticity. Ozone catalytic oxidation is a very promising technical method for wastewater treatment. In this paper, Mn/Mg/Ce ternary catalyst was prepared, and the ozone catalytic oxidation treatment of actual and simulated printing and dyeing wastewater was performed to study the performance of four different carrier catalysts, namely, molecular sieve (MS), silica gel (SG), attapulgite (ATP), and nano alumina (Al2O3), by simulated dynamic test. The effects of reaction time, pH, and catalyst dosage on methyl orange degradation were studied. The results showed that under the optimum treatment conditions (120 min, pH 11, and 12.5 g/L catalyst dosage), the degradation rate of methyl orange reached 96% and the removal rate of the chemical oxygen demand of printing and dyeing wastewater reached 48.7%. This study shows that the treatment effect of ozone catalytic oxidation on printing and dyeing wastewater is remarkably improved after catalyst addition. This study provides a new choice of ozone catalyst for the degradation of printing and dyeing wastewaters in the future.

Sign in / Sign up

Export Citation Format

Share Document