EELGRASS BED PROMOTION PROCESS AND RETENTION MECHANISM ON THE CONSTRUCTED ARTIFICIAL BED WITH GRANULATED FLY ASH

2013 ◽  
Vol 69 (2) ◽  
pp. I_1072-I_1077
Author(s):  
Yoshinori KOSHIKAWA ◽  
Tadashi HIBINO ◽  
Shinya NAKASHITA ◽  
Ichiro YOSHIOKA ◽  
Kenji NAKAMOTO ◽  
...  
Keyword(s):  
Fly Ash ◽  
Retention Mechanism ◽  
Promotion Process

Characterization of lead-bearing phases in municipal waste combustor fly ash

1996 ◽  
Vol 54 ◽  
pp. 516-517
Author(s):  
L. L. Sutter ◽  
G. R. Dewey ◽  
J. F. Sandell
Keyword(s):  
Fly Ash ◽  
Bottom Ash ◽  
Municipal Waste ◽  
Primary Concern ◽  
Leaching Behavior ◽  
Waste Combustion ◽  
Lead And Cadmium ◽  
Lead Speciation ◽  
Accepted Practice

Municipal waste combustion typically involves both energy recovery as well as volume reduction of municipal solid waste prior to landfilling. However, due to environmental concerns, municipal waste combustion (MWC) has not been a widely accepted practice. A primary concern is the leaching behavior of MWC ash when it is stored in a landfill. The ash consists of a finely divided fly ash fraction (10% by volume) and a coarser bottom ash (90% by volume). Typically, MWC fly ash fails tests used to evaluate leaching behavior due to high amounts of soluble lead and cadmium species. The focus of this study was to identify specific lead bearing phases in MWC fly ash. Detailed information regarding lead speciation is necessary to completely understand the leaching behavior of MWC ash.

INFLAMMATION, CHEMOKINE EXPRESSION, AND DEATH IN MONOCROTALINE-TREATED RATS FOLLOWING FUEL OIL FLY ASH INHALATION

1997 ◽  
Vol 9 (6) ◽  
pp. 541-565 ◽  
Author(s):  
Cheryl R. Killingsworth ◽  
Francesca Alessandrini ◽  
G. G. Krishna Murthy ◽  
Paul J. Catalano ◽  
Joseph D. Paulauskis ◽  
...  
Keyword(s):  
Fly Ash ◽  
Fuel Oil ◽  
Chemokine Expression ◽  
Oil Fly Ash

Effect of Curing Time on the Performance of Fly Ash Geopolymer-Stabilized RAP Bases

2021 ◽  
Vol 33 (3) ◽  
pp. 04021001
Author(s):  
Maheshbabu Jallu ◽  
Sireesh Saride ◽  
Arul Arulrajah ◽  
Subrahmanyam Challapalli ◽  
Robert Evans
Keyword(s):  
Fly Ash ◽  
Curing Time

Review on Experimental Study on Effect of Corrosion In Reinforced Concrete Fly-Ash Beam

2020 ◽  
pp. 92-96
Author(s):  
Shubham N. Dadgal ◽  
Shrikant Solanke
Keyword(s):  
Fly Ash ◽  
Bond Strength ◽  
Structural Damage ◽  
Pullout Test ◽  
Partial Replacement ◽  
Structural Members ◽  
Accelerated Corrosion ◽  
Resistivity Method ◽  
Electrical Resistivity Method ◽  
Structural Failures

In modern days for structures in coastal areas it has been observed that the premature structural failures are occurs due to corrosion of the reinforcements of the designed structural member. The corrosion causes the structural damage which in turn leads to reduction in the bearing capacity of the concerned structural members. The aim of this study was to study the effect of partial replacement of fly ash to minimize the corrosion effect. Beams were designed and corroded by using artificial method known accelerated corrosion method. The beams were then tested for flexural and bond strength. Also the weight loss of the reinforced bars was been determined using electrical resistivity method. The fly ash will replace by 10% and 15%.The strength will calculate at varying percentage of corrosion at 10% and 15%. Beams will cast at M25 grade concrete. The flexural strength will test by using UTM and the bond strength will calculate using pullout test.

A Review on Utilization of Fly- Ash and Pond-Ash as a Partial Replacement of Cement in Concrete Mix Design

2018 ◽  
pp. 413-418
Author(s):  
Harshkumar Patel ◽  
Yogesh Patel
Keyword(s):  
Fly Ash ◽  
Electricity Generation ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Strength Test ◽  
Partial Replacement ◽  
Pond Ash ◽  
Research Activities ◽  
Ash Disposal

Now-a-days energy planners are aiming to increase the use of renewable energy sources and nuclear to meet the electricity generation. But till now coal-based power plants are the major source of electricity generation. Disadvantages of coal-based thermal power plants is disposal problem of fly ash and pond ash. It was earlier considered as a total waste and environmental hazard thus its use was limited, but now its useful properties have been known as raw material for various application in construction field. Fly ash from the thermal plants is available in large quantities in fine and coarse form. Fine fly ash is used in construction industry in some amount and coarse fly ash is subsequently disposed over land in slurry forms. In India around 180 MT fly is produced and only around 45% of that is being utilized in different sectors. Balance fly ash is being disposed over land. It needs one acre of land for ash disposal to produce 1MW electricity from coal. Fly ash and pond ash utilization helps to reduce the consumption of natural resources. The fly ash became available in coal based thermal power station in the year 1930 in USA. For its gainful utilization, scientist started research activities and in the year 1937, R.E. Davis and his associates at university of California published research details on use of fly ash in cement concrete. This research had laid foundation for its specification, testing & usages. This study reports the potential use of pond-ash and fly-ash as cement in concrete mixes. In this present study of concrete produced using fly ash, pond ash and OPC 53 grade will be carried. An attempt will be made to investigate characteristics of OPC concrete with combined fly ash and pond ash mixed concrete for Compressive Strength test, Split Tensile Strength test, Flexural Strength test and Durability tests. This paper deals with the review of literature for fly-ash and pond-ash as partial replacement of cement in concrete.

ANALISIS FAKTOR-FAKTOR MINAT NASABAH MEMILIKI KARTU KREDIT BCA PADA PT. BANK CENTRAL ASIA CABANG MANGGA BESAR RAYA

2019 ◽  
Vol 11 (2B) ◽  
pp. 47
Author(s):  
Asna Manullang ◽  
Debih Arliana
Keyword(s):  
Central Asia ◽  
Product Price ◽  
Physical Evidence ◽  
Place Promotion ◽  
Promotion Process

Tingkat pencapaian minat nasabah untuk memiliki kartu kredit BCA dipengaruhi oleh delapan kelompok variabel yang dikenal sebagai 8P yaitu Product, Price, Place, Promotion, Process, Physical evidence, People dan Produktivity and quality. Penelitian dilakukan di PT.Bank Central Asia, Jalan Mangga Besar Raya No. 128 Jakarta Pusat. Tujuan dari penelitian adalah untuk mengetahui bagaimana pengaruh faktor-faktor minat nasabah memiliki kartu kredit BCA. Penelitian ini menggunakan 2 metoda yaitu metoda deskriptif yaitu mengembangkan produk dan jasa yang sudah ada dan analisa kuantitatif dibagi menjadi dua analisa yang pertama analisa uji validitas dan analisa uji reabilitas. Data yang dianalisa yaitu analisis faktorfaktor yang menjadi daya tarik konsumen untuk memiliki kartu kredit BCA dapat dihitung dan diteliti langsung, data dianalisis dengan menggunakan SPSS versi 16.0. Responden telah mengisi 33 pertanyaan yang disebut dengan variabel dengan nilai skor dan dibagi berdasarkan kelompok sebagai faktornya. Hasil analisis dapat disimpulkan daya tarik konsumen untuk memiliki kartu kredit BCA ada 7 faktor utama. Faktor pertama Produk dengan nilai varians (11,74), faktor ke dua adalah Harga dengan nilai varians (10,73%), faktor ke tiga adalah Distribusi dengan nilai varians (8%), faktor ke empat adalah Promosi dengan nilai varians (7,77%), faktor ke lima adalah Proses dengan nilai varians (6,75%), faktor ke enam adalah Fisik dengan nilai varians (6,28%) dan faktor ke tujuh adalah Kualitas dengan nilai varians (5,76%). Faktor produk merupakan faktor yang paling mempengaruhi konsumen untuk memiliki kartu kredit BCA. Faktor ini dapat menerangkan keragaman data (varians) sebesar 11,74%. Dari beberapa analisis yang diperoleh bahwa faktor produk sangat berpengaruhi positif terhadap keputusan konsumen dalam memiliki kartu kredit BCA karena konsumen menginginkan produk yang baik agar dapat mempermudah transaksi dimana saja dan kapan saja. Kata Kunci: BCA, kartu kredit, Keputusan Nasabah

Sign in / Sign up

Export Citation Format

Share Document