scholarly journals Functionalization of Chitosan with Maleic Anhydride for Proton Exchange Membrane

2018 ◽  
Vol 18 (2) ◽  
pp. 313 ◽  
Author(s):  
Muhammad Ridwan Septiawan ◽  
Dian Permana ◽  
Sitti Hadijah Sabarwati ◽  
La Ode Ahmad ◽  
La Ode Ahmad Nur Ramadhan
Keyword(s):  
Ion Exchange ◽  
Maleic Anhydride ◽  
Proton Conductivity ◽  
Proton Exchange Membrane ◽  
Exchange Capacity ◽  
Proton Exchange ◽  
Ion Exchange Capacity ◽  
Chitosan Membrane ◽  
Blending Method ◽  
Exchange Membrane

Chitosan was modified by maleic anhydride, and it was then functionalized using heterogeneous and blending method to obtain the membrane. The results of the reaction between chitosan with maleic anhydride were signed by the new peak appears around 1475 cm-1 which attributed to C=C bending of alkene. The new peak also appears at 1590 cm-1 which attributed to N-H bending of amide. Chitosan-maleic anhydride membranes show microstructure of chitosan membrane with high porous density and rigidity while chitosan-maleic anhydride membranes have clusters. In addition, the thermal tenacity of membranes reached 500 °C. Modified membrane by heterogeneous and blending method have higher water uptake, ion exchange capacity, and proton conductivity than chitosan membrane. Moreover, the blending method is much more effective than the heterogeneous method that can be exhibited from ion exchange capacity and proton conductivity values of 1.08–6.38 meq g-1 and 1x10-3–1x10-2 S cm-1, 0.92–2.27 meq g-1 and 1.53x10-4–3.04x10-3 S cm-1, respectively. The results imply that modification of chitosan membrane with the addition of maleic anhydride using heterogeneous and blending method can be applied to proton exchange membrane.

scholarly journals Evaluation of power generation and treatment efficiency of dairy wastewater in microbial fuel cell using TiO2 – SPEEK as proton exchange membrane

2021 ◽  
Author(s):  
D. Vidhyeswari ◽  
A. Surendhar ◽  
S. Bhuvaneshwari
Keyword(s):  
Fuel Cell ◽  
Ion Exchange ◽  
Composite Membrane ◽  
Proton Exchange Membrane ◽  
Exchange Capacity ◽  
Proton Exchange ◽  
Uptake Capacity ◽  
Ion Exchange Capacity ◽  
Water Uptake Capacity ◽  
Exchange Membrane

Abstract The aim of this study is to synthesis SPEEK composite proton exchange membrane with the addition of TiO2 nanofillers for microbial fuel cell application. SPEEK composite membrane with varying weight percentage of TiO2 (2.5, 5, 7.5 and 10%) was prepared to study the effect of TiO2 concentration on membrane performance. Synthesized composite membranes were subjected to various characterization studies such as FT-IR, XRD, Raman spectroscopy; TGA, UTM and SEM. Physico-chemical properties of membrane such as water uptake capacity, ion exchange capacity and thickness were also analyzed. 5% TiO2 – SPEEK composite membrane exhibited the higher water uptake capacity value and Ion exchange capacity value of 31% and 1.71 meq/g respectively. Performance of the MFC system with TiO2 – SPEEK membranes were evaluated and compared with the pristine SPEEK and Nafion membrane. 5% TiO2 – SPEEK membrane produced the higher power density (1.22 W/m2) and voltage (0.635 V) than the other membranes investigated. Efficacy of MFC in wastewater treatment was evaluated based on the chemical oxygen demand (COD), total organic carbon content and turbidity. Biofilm growth over the surface of the electrodes was also analyzed using scanning electron microscopy.

scholarly journals Polymer Electrolyte Membranes Based on Nafion and a Superacidic Inorganic Additive for Fuel Cell Applications

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 914 ◽  
Author(s):  
Lucia Mazzapioda ◽  
Stefania Panero ◽  
Maria Assunta Navarra
Keyword(s):  
Fuel Cell ◽  
Ion Exchange ◽  
Proton Exchange Membrane ◽  
Sol Gel ◽  
Composite Membranes ◽  
Exchange Capacity ◽  
Proton Exchange ◽  
Thermal Transitions ◽  
Ion Exchange Capacity ◽  
Electrolyte Membranes

Nafion composite membranes, containing different amounts of mesoporous sulfated titanium oxide (TiO2-SO4) were prepared by solvent-casting and tested in proton exchange membrane fuel cells (PEMFCs), operating at very low humidification levels. The TiO2-SO4 additive was originally synthesized by a sol-gel method and characterized through x-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and ion exchange capacity (IEC). Peculiar properties of the composite membranes, such as the thermal transitions and ion exchange capacity, were investigated and here discussed. When used as an electrolyte in the fuel cell, the composite membrane guaranteed an improvement with respect to bare Nafion systems at 30% relative humidity and 110 °C, exhibiting higher power and current densities.

scholarly journals Ameliorated Performance of Sulfonated Poly(Arylene Ether Sulfone) Block Copolymers with Increased Hydrophilic Oligomer Ratio in Proton-Exchange Membrane Fuel Cells Operating at 80% Relative Humidity

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1871 ◽  
Author(s):  
Ae Kim ◽  
Mohanraj Vinothkannan ◽  
Kyu Lee ◽  
Ji Chu ◽  
Sumg Ryu ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Relative Humidity ◽  
Proton Conductivity ◽  
Proton Exchange Membrane ◽  
Exchange Capacity ◽  
Proton Exchange ◽  
Arylene Ether ◽  
Poly Condensation ◽  
Exchange Membrane ◽  
Sulfonated Poly

We designed and synthesized a series of sulfonated poly(arylene ether sulfone) (SPES) with different hydrophilic or hydrophobic oligomer ratios using poly-condensation strategy. Afterward, we fabricated the corresponding membranes via a solution-casting approach. We verified the SPES membrane chemical structure using nuclear magnetic resonance (1H NMR) and confirmed the resulting oligomer ratio. Field-emission scanning electron microscope (FE-SEM) and atomic force microscope (AFM) results revealed that we effectively attained phase separation of the SPES membrane along with an increased hydrophilic oligomer ratio. Thermal stability, glass transition temperature (Tg) and membrane elongation increased with the ratio of hydrophilic oligomers. SPES membranes with higher hydrophilic oligomer ratios exhibited superior water uptake, ion-exchange capacity, contact angle and water sorption, while retaining reasonable swelling degree. The proton conductivity results showed that SPES containing higher amounts of hydrophilic oligomers provided a 74.7 mS cm−1 proton conductivity at 90 °C, which is better than other SPES membranes, but slightly lower than that of Nafion-117 membrane. When integrating SPES membranes with proton-exchange membrane fuel cells (PEMFCs) at 60 °C and 80% relative humidity (RH), the PEMFC power density exhibited a similar increment-pattern like proton conductivity pattern.

scholarly journals Preparation and Characterization of a Novel Sulfonated Titanium Oxide Incorporated Chitosan Nanocomposite Membranes for Fuel Cell Application

Membranes ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 450
Author(s):  
Saad Ahmed ◽  
Tasleem Arshad ◽  
Amir Zada ◽  
Annum Afzal ◽  
Muhammad Khan ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Proton Conductivity ◽  
Proton Exchange Membrane ◽  
Mechanical Stability ◽  
Exchange Capacity ◽  
Proton Exchange ◽  
Nanocomposite Membranes ◽  
Nano Tio2 ◽  
Proton Conducting ◽  
Exchange Membrane

In this study, nano-TiO2 sulfonated with 1,3-propane sultone (STiO2) was incorporated into the chitosan (CS) matrix for the preparation of CS/STiO2 nanocomposite membranes for fuel cell applications. The grafting of sulfonic acid (–SO3H) groups was confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis and energy-dispersive X-ray spectroscopy. The physicochemical properties of these prepared membranes, such as water uptake, swelling ratio, thermal and mechanical stability, ion exchange capacity and proton conductivity, were determined. The proton conducting groups on the surface of nano-TiO2 can form continuous proton conducting pathways along the CS/STiO2 interface and thus improve the proton conductivity of CS/STiO2 nanocomposite membranes. The CS/STiO2 nanocomposite membrane with 5 wt% of sulfonated TiO2 showed a proton conductivity (0.035 S·cm−1) equal to that of commercial Nafion 117 membrane (0.033 S·cm−1). The thermal and mechanical stability of the nanocomposite membranes were improved because the interfacial interaction between the -SO3H group of TiO2 and the –NH2 group of CS can restrict the mobility of CS chains to enhance the thermal and mechanical stability of the nanocomposite membranes. These CS/STiO2 nanocomposite membranes have promising applications in proton exchange membrane fuel cells.

scholarly journals Fabrication of Cation Exchange Membrane for Microbial Fuel Cells

2019 ◽  
Vol 8 (2) ◽  
pp. 769-773
Keyword(s):  
Fuel Cells ◽  
Ion Exchange ◽  
Cation Exchange ◽  
Proton Conductivity ◽  
Microbial Fuel Cells ◽  
Compositional Analysis ◽  
Exchange Capacity ◽  
Poly Vinyl Alcohol ◽  
Ion Exchange Capacity ◽  
Exchange Membrane

In this study the cation exchange membranes(CEM) were fabricated using 3 different compositions of sulphonated poly vinyl alcohol (SPVA) and phosphorylated graphene oxide(PGO) in weight ratios by physicalmixing and casting method. Loading of PGO in the SPVA improvedwater uptake property which signifies increase in ion exchange capacity(IEC) and proton conductivity as presence of acidic groups were characterized. These fabricated membranes performances were assessed in microbial fuel cells(MFCs) and characterized using XRD and FTIR for its compositional analysis. Due to proper proton conducting channelsmost suitable CEM (SPVA-PGO-3) revealed higher proton conductivity 9.0 x 10-2 S/cm at 27oC, water uptake 114%, area swelling 54.2% and ion exchange capacity (IEC) 1.92 meq/g. The power density obtained for this composite membrane applied in MFC-3 was observed to be 503.1 mW/m2 while the COD removal results obtained as 80.8 %.

scholarly journals Preparation and characterization of a novel sulfonated titanium oxide incorporated Chitosan nanocomposite membranes for fuel cell application

2021 ◽  
Author(s):  
Saad Ahmed ◽  
Amjad Hussain ◽  
Tasleem Arshad ◽  
Muhammad Khan ◽  
Amir Zada ◽  
...  
Keyword(s):  
Proton Conductivity ◽  
Proton Exchange Membrane ◽  
Mechanical Stability ◽  
Exchange Capacity ◽  
Proton Exchange ◽  
Hydroxyl Group ◽  
Gravimetric Analysis ◽  
Nanocomposite Membranes ◽  
Chitosan Matrix ◽  
Exchange Membrane

Abstract In this study, nano-TiO2 sulfonated (STiO2) with 1,3-propanesultone was incorporated into the chitosan matrix for the fabrication of chitosan/STiO2 (C/STiO2) nanocomposite membranes. The grafting of sulfonic acid (–SO3H) groups was confirmed with Fourier transform infrared spectroscopy, thermos-gravimetric analysis and energy-dispersive X-ray spectroscopy. The physicochemical properties such as water uptake, swelling ratio, thermal and mechanical stability, ion exchange capacity and proton conductivity of the as prepared membranes were measured. The proton groups on the surface of TiO2 can form continuous proton conducting pathways along the C/STiO2 interface resulting in the improvement of proton conductivity of C/STiO2 nanocomposite membranes. The nanocomposite membrane with 5 % sulfonated TiO2 showed higher proton conductivity (0.035 S·cm-1) than commercial Nafion-117 membrane (0.033 S·cm-1) due to the strong interfacial interactions between -SO3H group of acid and hydroxyl group of TiO2. Further, the –NH2 groups of chitosan restrict the mobility of chitosan chains to enhance the thermal and mechanical stability of the nanocomposite membranes. These C/STiO2 nanocomposite membranes have promising applications in proton exchange membrane fuel cells.

Synthesis and Characterization of Sulfonated Polybenzimidazole (SPBI) Copolymer for Polymer Exchange Membrane Fuel Cell

2013 ◽  
Vol 860-863 ◽  
pp. 803-806 ◽  
Author(s):  
Loh Kee Shyuan ◽  
Eng Lee Tan ◽  
Wan Ramli Wan Daud ◽  
Abu Bakar Mohamad
Keyword(s):  
Fuel Cell ◽  
Ion Exchange ◽  
Proton Conductivity ◽  
Water Uptake ◽  
Uptake Rate ◽  
Exchange Capacity ◽  
Ion Exchange Capacity ◽  
Phase Inversion Technique ◽  
Sulfonated Polybenzimidazole ◽  
Exchange Membrane

A diverse sulfonated polybenzimidazole copolymer (SPBI) as proton exchange membrane was synthesiszed via one-step high temperature polymerization method with 3,3-diaminobenzidine (DABD), 5-sulfoisophthalic acid (SIPA), 4,4-sulfonyldibenzoic acid (SDBA) and biphenyl-4,4-dicarboxylic acid (BDCA). The SPBI membrane was prepared through a direct hot-casting and in situ phase inversion technique. Characterization tests were carried out on the membranes including surface morphology, distribution of elements on the membrane, determination of functional groups, thermal stability, ion exchange capacity, water uptake rate and proton conductivity. The as-synthesized SPBI membrane displayed a smooth surface via scanning electron microscopy (SEM) analysis which is thermally stable up to 443 °C. The SPBI membrane showed higher water uptake rate (WUR) and proton conductivity though it had lower ion exchange capacity (IEC) value compared to recast Nafion membrane. The proton conductivity of the SPBI membrane with IEC of 0.60 mmol/g was 4.50 × 10-2 S/cm at 90 °C. This study shows that the SPBI membrane has great potential in polymer exchange membrane fuel cell (PEMFC) applications.

Sign in / Sign up

Export Citation Format

Share Document