Effect of Adhesive Boosters on Bond Strength of Bleached Teeth in Orthodontic Bonding

2021 ◽  
pp. 030157422110044
Author(s):  
I Ranganayakulu ◽  
D Praveen Kumar Varma ◽  
Padma Priya CV ◽  
RSVM Raghu Ram ◽  
K Anand Viswanadh ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Orthodontic Brackets ◽  
Carbamide Peroxide ◽  
Universal Testing Machine ◽  
Universal Testing ◽  
Significant Difference ◽  
Maxillary Premolars ◽  
And Control

Objectives: To evaluate and compare the effect of adhesion boosters on shear bond strength (SBS) of orthodontic brackets on bleached teeth. Materials and Methods: A sample of 90 extracted maxillary premolars was equally divided into 2 groups of bleached and non-bleached teeth. Twenty-two percent carbamide peroxide gel was used as an agent for bleaching. Each group was further divided equally into 3 subgroups depending on the type of adhesive booster used (Enhance LC, All-bond 2, and no adhesive booster [control]) and maxillary premolars brackets were bonded. Debonding was done with a universal testing machine, and the SBS was recorded. Results: The SBS of non-bleached teeth was highest for All-bond 2 (14.78 ± 2.47 MPa) followed by Enhance LC (13.15 ± 3.49 MPa) and control (10.30 ± 1.06 MPa). The SBS of bleached teeth was highest for All bond 2 (12.23 ± 1.41 MPa) followed by Enhance LC (11.76 ± 1.71 MPa) and control (9.63 ± 1.06 MPa). All subgroups showed a significant difference in SBS (P = .000) on bleached and non-bleached teeth. The SBS showed a significant difference between the bleached and non-bleached teeth in All-bond 2 group (P = .019). Conclusion: Adhesive boosters increased the SBS of both bleached and non-bleached teeth significantly. Among the two adhesive boosters used, All-bond 2 showed more SBS values.

scholarly journals The Influence of No-Primer Adhesives and Anchor Pylons Bracket Bases on Shear Bond Strength of Orthodontic Brackets

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Andrea Scribante ◽  
Maria Francesca Sfondrini ◽  
Danilo Fraticelli ◽  
Paola Daina ◽  
Alessandra Tamagnone ◽  
...  
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Orthodontic Brackets ◽  
Universal Testing Machine ◽  
Universal Testing ◽  
Adhesive Remnant Index ◽  
Chi Squared ◽  
Mandibular Incisors

Objective. The aim of this study was to compare the shear bond strength (SBS) and adhesive remnant index (ARI) scores of no-primer adhesives tested with two different bracket bases.Materials and Methods. 120 bovine permanent mandibular incisors were divided into 6 groups of 20 specimens. Two brackets (ODP) with different bracket bases (anchor pylons and 80-gauge mesh) were bonded to the teeth using a conventional adhesive (Transbond XT) and two different no-primer adhesive (Ortho Cem; Heliosit) systems. Groups were tested using an instron universal testing machine. SBS values were recorded. ARI scores were measured. SEM microphotographs were taken to evaluate the pattern of bracket bases. Statistical analysis was performed. ANOVA and Tukey tests were carried out for SBS values, whereas a chi-squared test was applied for ARI scores.Results. Highest bond strength values were reported with Transbond XT (with both pad designs), Ortho Cem bonded on anchor pylons and Heliosit on 80-gauge mesh. A higher frequency of ARI score of “3” was reported for Transbond XT groups. Other groups showed a higher frequency of ARI score “2” and “1.”Conclusion. Transbond XT showed the highest shear bond strength values with both pad designs.

scholarly journals Pengaruh bahan desensitasi pasca bleaching ekstrakoronal terhadap kekuatan geser pelekatan restorasi resin komposit

2017 ◽  
Vol 2 (1) ◽  
pp. 35
Author(s):  
Ema Mulyawati
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Artificial Saliva ◽  
Testing Machine ◽  
Group Iii ◽  
Universal Testing Machine ◽  
Universal Testing ◽  
Group I ◽  
Significant Difference

The Effect of desensitizing agent in post-extracoronal bleaching on shear bond strength of composite resin. The dentinal hypersensitivity is a common condition among patients after extracoronal bleaching treatment that usually needs the application of desensitizing agent. The purpose of this study was to evaluate the composite resin restoration shear bond strength with and without desensitizing application after extracoronal bleaching using 40% of H2O2. Twenty one extracted permanent human incisor teeth were randomly divided into 3 groups of 7 each. Group I was with the application of 40% H2O2 without any desensitizing agent. Group II was with the application of 40% of H2O2 with desensitizing agent and group III served as the control. The teeth were immersed in artificial saliva and stored in 37 °C incubator for 7 days. The teeth were restored using composite resin. After restoring the shear bond strength of composite resin was tested using a universal testing machine. Result and conclusion. there is no significant difference between bleaching group with and without desensitizing agent. The application of desensitizing agent after extracoronal bleaching did not impact the composite resin shear bond strength.ABSTRAKDentin hipersensitif merupakan kondisi yang biasa dialami pasien setelah perawatan bleaching ekstrakoronal yang biasanya memerlukan aplikasi bahan desensitasi. Penelitian ini bertujuan untuk mengetahui pengaruh bahan desensitasi pasca bleaching ekstrakoronal menggunakan H2O2 40% terhadap kekutan geser pelekatan restorasi resin komposit. Dua puluh satu gigi permanen insisivus yang telah dicabut dibagi dalam tiga kelompok masing-masing 7 gigi. Kelompok I dilakukan bleaching ekstrakoronal dengan H2O2 tanpa bahan desensitasi. Kelompok II dilakukan bleaching setelah itu diaplikasikan bahan desensitasi dan kelompok III sebagai kelompok kontrol. Semua gigi-gigi tersebut di rendam dalam saliva buatan dan dimasukkan inkubator selama 7 hari pada suhu 37 °C. Selanjutnya seluruh gigi dilakukan restorasi resin komposit menggunakan light cure halogen. Setelah itu dilakukan pengujian kekuatan geser pelekatan menggunakan universal testing machine. Data dianalisis menggunakan uji Kruskal - Wallis. Hasil penelitian menunjukkan bahwa tidak ada perbedaan kekuatan geser pelekatan pada semua kelompok perlakuan (p > 0,05). Dari penelitian ini disimpulkan bahwa tidak terdapat pengaruh aplikasi bahan desensitasi pasca bleaching ekstrakoronal terhadap kekuatan geser pelekatan restorasi resin komposit.

scholarly journals Effects of Fluorosis and Self Etching Primers on Shear Bond Strengths of Orthodontic Brackets

2009 ◽  
Vol 03 (03) ◽  
pp. 173-177 ◽  
Author(s):  
Ahmet Yalcin Gungor ◽  
Hakan Turkkahraman ◽  
Necdet Adanir ◽  
Huseyin Alkis
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Orthodontic Brackets ◽  
Universal Testing ◽  
Adhesive Remnant Index ◽  
Halogen Light ◽  
Significant Difference ◽  
Bond Strengths ◽  
Group Ii ◽  
Clinical Changes

ABSTRACTObjectives: To evaluate the effects fluorosis and self etching primers (SEP) on shear bond strengths (SBS) of orthodontic brackets.Methods: A total of 48 (24 fluorosed and 24 non-fluorosed) non-carious freshly extracted human permanent premolar teeth were used in this study. Fluorosed teeth were selected according to the modified Thylstrup and Fejerskov index (TFI), which is based on the clinical changes in fluorosed teeth. Fluorosed and non-fluorosed teeth were randomly assigned to 4 groups of 12 each. In groups I (non-fluorosed teeth) and II (fluorosed teeth), standard etching protocol was used and brackets were bonded with Light Bond. In groups III (non-fluorosed teeth) and IV (fluorosed teeth), Transbond Plus SEP was used and brackets were bonded with Transbond XT Light Cure Adhesive. All specimens were cured with a halogen light. After bonding, SBS of the brackets were tested with Universal testing machine. After debonding, all teeth and brackets in the test groups were examined under 10x magnifications. Any adhesive remained after debonding was assessed and scored according to the modified Adhesive Remnant Index (ARI).Results: ANOVA indicated a significant difference between groups (P<.001). SBS in group II (Light Bond+Fluorosis) were significantly lower than other groups. ARI scores of the groups were also significantly different (P<.001). There was a greater frequency of ARI scores of 1,2 and 3 in group II (Light Bond+Fluorosis).Conclusions: When standard etching protocol was used enamel fluorosis significantly decreased the bond strength of orthodontic brackets. Satisfactory bond strengths were obtained when SEP was used for bonding brackets to the fluorosed teeth. (Eur J Dent 2009;3:173-177)

scholarly journals The Impact of Chlorhexidine Mouth Rinse on the Bond Strength of Polycarbonate Orthodontic Brackets

2014 ◽  
Vol 15 (6) ◽  
pp. 688-692 ◽  
Author(s):  
Sukumaran Anil ◽  
Farouk Ahmed Hussein ◽  
Mohammed Ibrahim Hashem ◽  
Elna P Chalisserry
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Test Group ◽  
Orthodontic Brackets ◽  
Control Group ◽  
Mouth Rinse ◽  
Significant Difference ◽  
Bond Strengths ◽  
The Impact

ABSTRACT Objective The purpose of the current in-vivo study was to assess the effect of using 0.12% chlorhexidine (CHX) mouth rinse, before bonding, on shear bond strength of polycarbonate brackets bonded with composite adhesive. Subjects and methods Eighteen orthodontic patients with a mean age 21.41 ± 1.2 years, who were scheduled to have 2 or more first premolars extracted, were included in this study. Patients were referred for an oral prophylaxis program which included, in part, the use of a mouth rinse. Patients were divided into 2 groups, a test group of 9 patients who used 0.12% CHX gluconate mouth rinse twice daily and a control group of 9 patients who used a mouth rinse without CHX, but with same color. After 1 week, polycarbonate brackets were bonded to first premolars with Transbond XT composite adhesive. Premolars were extracted after 28 days and tested for shear bond strength on a universal testing machine. Student's t-test was used to compare shear bond strengths of both groups. Results No statistically significant difference was found in bond strengths’ values between both groups. The test group (with CHX) has mean shear bond strength of 14.21 ± 2.42 MPa whereas the control group (without CHX) revealed a mean strength of 14.52 ± 2.31 MPa. Conclusion The use of 0.12% CHX mouth rinse, for one week before bonding, did not affect the shear bond strength of polycarbonate brackets bonded with Transbond composite. Furthermore, these brackets showed clinically acceptable bond strength. How to cite this article Hussein FA, Hashem MI, Chalisserry EP, Anil S. The Impact of Chlorhexidine Mouth Rinse on the Bond Strength of Polycarbonate Orthodontic Brackets. J Contemp Dent Pract 2014;15(6):688-692.

scholarly journals Effects of adhesive systems at different temperatures on the shear bond strength of orthodontic brackets

2019 ◽  
Vol 13 (2) ◽  
pp. 103-108
Author(s):  
Serdar Akarsu ◽  
Suleyman Kutalmış Buyuk ◽  
Ahmet Serkan Kucukekenci
Keyword(s):  
Body Temperature ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
The Body ◽  
Orthodontic Brackets ◽  
Effect Of Temperature ◽  
Adhesive Systems ◽  
Significant Difference ◽  
Different Temperatures

Background. The temperature might affect the physical and mechanical properties of adhesive materials by reducing the polymerization rate. The present study aimed to evaluate the effect of temperature on the shear bond strength of metallic orthodontic brackets using various adhesive resin systems. Methods. Extracted human premolar teeth were randomly assigned to 8 groups (n=10) for bonding with the two available orthodontics adhesive systems (Transbond XT and NeoBond) at different temperatures: refrigeration temperature (4°C), room temperature (20°C), human body temperature (36°C) and high temperature (55°C). The shear bond strength (SBS) test was performed using a universal testing machine at a crosshead speed of 0.5 mm/min. The adhesive remnant index (ARI) was assigned to the fractured orthodontic brackets. Data were analyzed with one-way ANOVA, post hoc Tukey tests and independent t-test. Results. Transbond XT exhibited higher SBS values compared to Neobond at all the tested temperatures; however, a statistically significant difference was not observed (P>0.05). The SBS results were minimum at 4°C and maximum at 36°C in both the adhesive groups (P<0.05). Conclusion. Pre-heating orthodontic adhesives up to the body temperature prior to bonding the brackets in orthodontic treatment increased the bond strength of orthodontic brackets.

scholarly journals Reconditioning of self-ligating brackets

2011 ◽  
Vol 82 (1) ◽  
pp. 158-164 ◽  
Author(s):  
Maria Francesca Sfondrini ◽  
Esmeralda Xheka ◽  
Andrea Scribante ◽  
Paola Gandini ◽  
Giuseppe Sfondrini
Keyword(s):  
Statistical Analysis ◽  
Bond Strength ◽  
Null Hypothesis ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Shear Mode ◽  
Universal Testing ◽  
Adhesive Remnant Index ◽  
Significant Difference ◽  
Scanning Electron

Abstract Objective: To test the null hypothesis that there is no significant difference in the shear bond strength (SBS) and Adhesive Remnant Index (ARI) scores of new vs reconditioned self-ligating brackets. Materials and Methods: One hundred and twenty permanent extracted bovine teeth were embedded in resin blocks. Three different new and reconditioned self-ligating orthodontic brackets (Smart Clip [3M Unitek]; Quick [Forestadent]; and Damon3MX [Ormco]) were tested. Scanning electron microphotographs of the different new (groups 1, 3, and 5) and reconditioned (groups 2, 4, and 6) bracket bases were taken before starting the experiments. Brackets were then bonded to the teeth using an orthodontic adhesive and were then tested in shear mode using an Instron Universal Testing Machine. ARI scores were then recorded. Statistical analysis was performed to determine significant differences in SBS and ARI Scores. Results: Smart Clip and Damon3MX reconditioned brackets showed significantly lower SBS than did new ones. On the contrary, Quick reconditioned brackets showed significantly higher SBS than did new ones. No significant differences in ARI scores were found after the reconditioning process for the three different brackets tested. Conclusion: The in-office reconditioning procedure alters the SBS of self-ligating brackets, although SBS values still remain clinically acceptable.

The effect of caries detector dyes and a cavity cleansing agent on composite resin bonding to enamel and dentin

2001 ◽  
Vol 25 (1) ◽  
pp. 57-63 ◽  
Author(s):  
Azza El-Housseiny ◽  
Hana Jamjoum
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Testing Machine ◽  
Group Iv ◽  
Acid Etching ◽  
Group V ◽  
Universal Testing ◽  
Group I ◽  
Significant Difference

This study was undertaken to evaluate the effect of caries detector dyes and/or cavity cleanser on composite bonding and etching patterns of enamel and dentin. One hundred and eight non-carious premolars were divided into six groups according to the enamel and dentin pretreatment investigated. The different pretreatment were as follows: Group I: teeth with prophylaxis only, Group II: Sable seek caries detector dye,Groups III: chlorhexidine cavity cleanser,Group IV: the caries detectors dye followed by prophylaxis, Group V: the cavity cleanser followed by the caries detector dye, and Group IV: Snoop caries detector dye. The shear bond strength of composite resin bonded to enamel and dentin was evaluated by the Instron Universal testing machine while, the topographic details of enamel and dentin were examined by the SEM following the different pretreatment and acid etching. Results of the shear bond strength showed no statistically significant difference among the six groups, with no substantial differences in SEM results. It is concluded that using the caries detector dyes and/or chlorhexidine cavity cleanser before acid etching does not significantly affect composite bonding to enamel and dentin.

scholarly journals Evaluation of the shear bond strength of the union between two CoCr-alloys and a dental ceramic

2004 ◽  
Vol 12 (4) ◽  
pp. 280-284 ◽  
Author(s):  
Mariana Pretti ◽  
Edson Hilgert ◽  
Marco Antônio Bottino ◽  
Rander Pereira Avelar
Keyword(s):  
Shear Strength ◽  
Standard Deviation ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Casting Technique ◽  
Universal Testing ◽  
Significant Difference ◽  
Metal Ceramic ◽  
The Mean

INTRODUCTION: Based on the importance of the integrity of the metal/ceramic interface, the purpose of this work was to evaluate the shear bond strength of the metal-ceramic union of two Co-Cr alloys (Wirobond C, Bego; Remanium 2000, Dentaurum) combined with Omega 900 ceramic (Vita Zahnfabrik). MATERIAL AND METHOD: Eleven cylindrical matrixes were made for each alloy, and the metallic portion was obtained with the lost wax casting technique with standardized waxing of 4mm of height and of 4mm of diameter. The ceramic was applied according to the manufacturer's recommendations with the aid of a teflon matrix that allowed its dimension to be standardized in the same size as the metallic portion. The specimens were submitted to the shear bond test in an universal testing machine (EMIC), with the aid of a device developed for such intention, and constant speed of 0.5mm/min. RESULTS AND CONCLUSIONS: The mean resistance was 48.387MPa for Wirobond C alloy, with standard deviation of 17.718, and 55.956MPa for Remanium 2000, with standard deviation of 17.198. No statistically significant difference was observed between the shear strength of the two metal-ceramic alloys.

scholarly journals Shear Bond Strength of Orthodontic Brackets Fixed with Remineralizing Adhesive Systems after Simulating One Year of Orthodontic Treatment

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Gisele Lima Bezerra ◽  
Carlos Rocha Gomes Torres ◽  
Mateus Rodrigues Tonetto ◽  
Alvaro Henrique Borges ◽  
Milton Carlos Kuga ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Orthodontic Treatment ◽  
Testing Machine ◽  
Orthodontic Brackets ◽  
Adhesive Systems ◽  
Thermomechanical Cycling ◽  
Significant Difference ◽  
One Year

The objective of this study is to assess,in vitro, the shear bond strength of orthodontic brackets fixed with remineralizing adhesive systems submitted to thermomechanical cycling, simulating one year of orthodontic treatment. Sixty-four bovine incisor teeth were randomly divided into 4 experimental groups (n=16):XT: Transbond XT,QC: Quick Cure,OL: Ortholite Color, andSEP: Transbond Plus Self-Etching Primer. The samples were submitted to thermomechanical cycling simulating one year of orthodontic treatment. Shear bond strength tests were carried out using a universal testing machine with a load cell of 50 KgF at 0.5 mm/minute. The samples were examined with a stereomicroscope and a scanning electron microscope (SEM) in order to analyze enamel surface and Adhesive Remnant Index (ARI). Kruskal-Wallis and Mann-Whitney (with Bonferroni correction) tests showed a significant difference between the studied groups (p<0.05). Groups XT, QC, and SEP presented the highest values of adhesive resistance and no statistical differences were found between them. The highest frequency of failures between enamel and adhesive was observed in groups XT, QC, and OL. Quick Cure (QC) remineralizing adhesive system presented average adhesive resistance values similar to conventional (XT) and self-etching (SEP) adhesives, while remineralizing system (OL) provided the lowest values of adhesive resistance.

scholarly journals Effects of Potassium Nitrate and Oxalate Desensitizer Agents on Shear Bond Strengths of Orthodontic Brackets

2007 ◽  
Vol 77 (6) ◽  
pp. 1096-1100 ◽  
Author(s):  
Hakan Türkkahraman ◽  
Necdet Adanir
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Potassium Nitrate ◽  
Orthodontic Brackets ◽  
Group Iii ◽  
Group I ◽  
Halogen Light ◽  
Significant Difference ◽  
Bond Strengths

Abstract Objective: To evaluate the effects of potassium nitrate and oxalate desensitizer agents on shear bond strengths of orthodontic brackets. Materials and Methods: Forty-five extracted human premolar teeth were randomly assigned to three groups of 15 each. UltraEZ potassium nitrate desensitizer was applied on teeth in the first group, while BisBlock oxalate desensitizer was applied on teeth in the second group. The third group served as a control. Orthodontic brackets were bonded with a light cure composite resin and cured with a halogen light. After bonding, the shear bond strength of the brackets was tested with a universal testing machine. Results: The highest shear bond strengths were measured in Group III. The shear bond strength in Groups I and II was significantly lower than in Group III (P &lt; .001). Significant difference was also found between Group I and Group II (P &lt; .01). Conclusions: Orthodontic brackets bonded to enamel treated with potassium nitrate and oxalate desensitizers showed significantly lower bond strengths than did brackets bonded to untreated enamel.

Sign in / Sign up

Export Citation Format

Share Document