scholarly journals FORMULATION, IN VITRO, AND IN VIVO EVALUATION OF TASTE-MASKED ORAL DISINTEGRATING TABLETS OF FEXOFENADINE HYDROCHLORIDE USING SEMISYNTHETIC AND NATURAL SUPERDISINTEGRANTS

2021 ◽  
pp. 99-108
Author(s):  
NAGADANI SWARNALATHA ◽  
VIDYAVATHI MARAVAJHALA
Keyword(s):  
Desirability Function ◽  
Research Work ◽  
In Vivo Studies ◽  
Taste Masking ◽  
Wet Granulation ◽  
Maximum Plasma ◽  
In Vivo Evaluation ◽  
Eudragit Epo

Objective: The aim of the present research work was to prepare and evaluate taste-masked oral disintegrating tablets (ODT) of Fexofenadine hydrochloride. Methods: In the present work, Eudragit EPO, a taste masking agent and Karaya gum (GK) (natural), Sodium starch glycolate, and Croscarmellose sodium (CCS) (semi-synthetic) super disintegrants in three ratios (3, 6,9%) were used. Taste masked granules were prepared by different ratios of the drug: Eudragit EPO (1:1, 1:1.5, 1:2) by wet granulation method. The optimized taste-masked granules (1:2) were selected by sensory evaluation test to prepare 9 Fexofenadine ODT (FH1-FH9) formulations. These were evaluated for different parameters. Then desirability function (DF) was calculated for all formulations using disintegration time (DT), time taken for the tablet to release 90% of the drug (t 90%), and % drug dissolved in 10 min (Q10) as significant parameters. Results: The best formulation (FH6) showed the highest DF value due to less DT and 100% in vitro drug release within 15 min. Thus, FH6 formulation containing 9% CCS was selected as the best among the prepared formulations to which in vivo studies were performed on rabbits to find maximum plasma concentration (Cmax), time taken to reach maximum concentration (tmax), area under the curve (AUC), rate of elimination (Kel), absorption rate (Ka) and half-life(t1/2) and compared with Fexofenadine (Allegra) marketed tablets. Total bioavailability was increased for the test formulation compared to the reference formulation. Conclusion: Fexofenadine was successfully prepared as ODT with increased AUC and decreased tmax to which stability studies were conducted which were found to be stable.

Formulation and In Vivo Evaluation of Mucoadhesive Micro-spheres of Rebamipide, a Mucoprotective Drug for GIT Disorders

2018 ◽  
Vol 11 (3) ◽  
pp. 4089-4097
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Kanteepan P
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Amino Acid Derivative ◽  
Release Mechanism ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Percentage Yield

Rebamipide, an amino acid derivative of 2-(1H)-quinolinone, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. The current research study aimed to develop novel gastro-retentive mucoadhesive microspheres of rebamipide using ionotropic gelation technique. Studies of micromeritic properties confirmed that microspheres were free flowing with good packability. The in vitro drug release showed the sustained release of rebamipide up to 99.23 ± 0.13% within 12 h whereas marketed product displayed the drug release of 95.15 ± 0.23% within 1 h. The release mechanism from microspheres followed the zero-order and Korsmeyer-Peppas (R2 = 0.915, 0.969), respectively. The optimized M12 formulation displayed optimum features, such as entrapment efficiency 97%, particle size 61.94 ± 0.11 µm, percentage yield 98%, swelling index 95% and mucoadhesiveness was 97%. FTIR studies revealed no major incompatibility between drug and excipients. SEM confirmed the particles were of spherical in shape. Optimized formulation (M12) were stable at 40°C ± 2°C/75% RH ± 5% RH for 6 months. In vivo studies were performed and kinetic parameters like Cmax, Tmax, AUC0-t, AUC0-∞, t1/2, and Kel  were calculated. The marketed product Cmax (3.15 ± 0.05 ng/mL) was higher than optimized formulation (2.58 ± 0.03 ng/mL). The optimized formulation AUC0-t (15.25 ± 1.14 ng.hr/mL), AUC0-∞ (19.42 ± 1.24 ng.hr/mL) was significantly higher than that of marketed product AUC0-t (10.21 ± 1.26 ng.hr/mL) and AUC0-∞ (13.15 ± 0.05 ng.hr/mL). These results indicate an optimized formulation bioavailability of 2.5-fold greater than marketed product.  

Structural and in vitro in vivo evaluation for taste masking

2018 ◽  
Vol 15 (11) ◽  
pp. 1105-1116
Author(s):  
Basheer Al-Kasmi ◽  
Okba Al Rahal ◽  
Hind El-Zein ◽  
Abdul-Hakim Nattouf
Keyword(s):  
Taste Masking ◽  
In Vivo Evaluation

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals Preparation and preclinical evaluation of aceclofenac loaded pectinate mucoadhesive microspheres

2012 ◽  
Vol 2 (1) ◽  
pp. 8 ◽  
Author(s):  
Santanu Chakraborty ◽  
Priyanka Nayak ◽  
Bala Murali Krishna ◽  
Madhusmruti Khandai ◽  
Ashoke Kumar Ghosh
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Polymer Concentration ◽  
Research Work ◽  
In Vivo Studies ◽  
Systemic Absorption ◽  
Cross Linking ◽  
Significant Difference

The aim of the present research work was to fabricate aceclofenac loaded pectinate microspheres by ionic gelation method and evaluate the effect of different cross-linking agents and polymer concentration on particle size, encapsulation efficacy and drug release behavior. It was also investigated that whether this pectinate dosage form was able to target the drug release in intestinal region and prevent the different side effect associated with the drug in stomach or not. It was observed that particle size, encapsulation efficacy and in vitro drug release were largely depended on polymer concentration and cross-linking agents. It was also observed that pectinate microspheres showed excellent pH depended mucoadhesive properties and they were able to restrict the drug release in stomach. <em>In vitro</em> drug release study showed that alminium-pectinate microspheres have more sustaining property as compared to barium-pectinate microspheres. Holm-Sidak multiple comparison analysis suggested a significant difference in measured t<sub>50%</sub> values among all the formulations with same cross-linking agent. In vivo studies revealed that the anti inflammatory and analgesic effects induced by pectinate microspheres were significantly high and prolonged as compared to pure drug. So, pectinate microspheres can be an excellent carrier for targeting the delivery of aceclofenac as well as help in improving the patient compliance by prolonging the systemic absorption.

scholarly journals Fabrication of Carbamazepine Cocrystals: Characterization, In Vitro and Comparative In Vivo Evaluation

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Muhammad Wasim ◽  
Abdul Mannan ◽  
Muhammad Hassham Hassan Bin Asad ◽  
Muhammad Imran Amirzada ◽  
Muhammad Shafique ◽  
...  
Keyword(s):  
Physicochemical Properties ◽  
Oral Bioavailability ◽  
In Vivo Studies ◽  
Aliphatic Chain ◽  
Dissolution Profile ◽  
Maximum Solubility ◽  
In Vivo Evaluation ◽  
Hydrophobic Nature

Carbamazepine (CBZ) is an antiepileptic drug having low bioavailability due to its hydrophobic nature. In the current study, efforts are made to investigate the effect of dicarboxylic acid coformer spacer groups (aliphatic chain length) on physicochemical properties, relative humidity (RH) stability, and oral bioavailability of CBZ cocrystals. Slurry crystallization technique was employed for the preparation of CBZ cocrystals with the following coformers: adipic (AA), glutaric (GA), succinic (SA), and malonic acid (MA). Powder X-ray diffractometry and Fourier-transform infrared spectroscopy confirmed cocrystal preparation. Physicochemical properties, RH stability, and oral bioavailability of cocrystals were investigated. Among the prepared cocrystals, CBZ-GA showed maximum solubility as well as improved dissolution profile (CBZ-GA > CBZ-MA > CBZ-AA > pure CBZ > CBZ-SA) in ethanol. Maximum RH stability was shown by CBZ-AA, CBZ-SA, and CBZ-MA. In vivo studies confirmed boosted oral bioavailability of cocrystals compared to pure CBZ. Furthermore, in vivo studies depicted the oral bioavailability order of cocrystals as CBZ-GA > CBZ-MA > Tegral® > CBZ-AA > CBZ-SA > pure CBZ. Thus, pharmaceutical scientists can effectively employ cocrystallization technique for tuning physicochemical properties of hydrophobic drugs to achieve the desired oral bioavailability. Overall, results reflect no consistent effect of spacer group on physicochemical properties, RH stability, and oral bioavailability of cocrystals.

scholarly journals PREPARATION AND IN VIVO EVALUATION OF CANDESARTAN CILEXETIL SOLID DISPERSIONS

2021 ◽  
pp. 129-133
Author(s):  
UPPULURU ASHOK KUMAR ◽  
GANDE SURESH
Keyword(s):  
Candesartan Cilexetil ◽  
Solid Dispersions ◽  
Selective Laser Sintering ◽  
In Vitro Release ◽  
In Vivo Studies ◽  
In Vivo Evaluation ◽  
Enhanced Solubility ◽  
Pure Drug

Objective: The present study aims at development of solid dispersions (SD) of candesartan cilexetil for enhanced solubility and bioavailability. Methods: About 18 SD formulations of candesartan cilexetil were prepared by solvent evaporation technique and evaluated. The in vitro release studies were conducted and the best formulation chosen was further characterized for Fourier transform infrared spectroscopy, Scanning electron microscope, X-ray, and stability. The in vivo evaluation study conducted in rats. Results: The formulation SD16 containing drug and Soluplus in 1:3 ratio along with 2% selective laser sintering was chosen optimal based on drug content (99.08%), and drug release (99.7%). In vivo studies conducted on SD16 showed that mean time to peak concentration (Tmax) was 2.0±0.05 and 4±0.2 h for the optimized and pure drug, respectively, while mean maximum drug concentration (Cmax) was 570.63±2.65 ng/mL and was significant as compared to the candesartan pure drug 175.146±0.07 ng/mL. Area under curve AUC0-∞ infinity for candesartan SD16 was higher (4860.61±1.05 ng.h/ml) than pure drug suspension 1480±1.72 ng.h/ml. Conclusion: Hence, the developed SD formulations enhanced the bioavailability of drug by 3 folds.

Pharmacokinetic Profile of Oxaliplatin-Loaded pH-Responsive Hydrogels in Rabbits

2020 ◽  
Vol 26 (44) ◽  
pp. 5755-5763
Author(s):  
Kaleem Ullah ◽  
Shujaat Ali Khan ◽  
Muhammad Sohail ◽  
Abdul Mannan ◽  
Ghulam Murtaza
Keyword(s):  
Drug Release ◽  
Drug Loading ◽  
Oral Solution ◽  
In Vivo Studies ◽  
Pharmacokinetic Parameters ◽  
Platinum Compound ◽  
In Vivo Evaluation ◽  
Significant Difference

Background: Oxaliplatin (OXP), a 3rd generation platinum compound, which causes severe side effects due to; impulse high concentration in the bloodstream thereby exposing healthy cells at a high ratio, nonspecific delivery at the target site and non-compliance is administered intravenously. Objective: The project was aimed at the development, characterization, and in-vitro and in-vivo evaluation of pHresponsive hydrogels for oral administration of OXP. Methods: Hydrogel formulations were synthesized through a free radical polymerization technique followed by brief characterization using various techniques. The hydrogels were investigated for various in-vitro studies such as sol-gel, drug loading, swelling, drug release, and MTT-assay. While in-vivo studies such as oral tolerability, histopathology, and hematology studies were performed on rabbits. A simple and sensitive HPLC-UV method was optimized and the comparative pharmacokinetic study was performed in rabbits using OXP-oral solution and OXP-loaded hydrogels. Results: In-vitro characterization confirmed that the reactant was successfully crosslinked to form thermally stable hydrogels with decreased crystallinity and rough surface. Swelling and drug release showed that hydrogels were more responsive to basic pH (6.8 and 7.4) in comparison with pH 1.2. The blank hydrogels were cytocompatible as more than 95% of the cells were viable while free OXP and OXP-loaded hydrogels displayed dosedependent cytotoxic effect. In-vivo studies confirmed that chitosan and gelatin hydrogel suspension was well tolerable up to 3800 mg/kg and 4000 mg/kg of body weight, respectively. Hematology and serum chemistry reports were well within the range suggesting normal liver and kidney functions. Similarly, histopathology slides of rabbit vital organs were also found normal without causing any histopathological change. Conclusion: HPLC-UV method was successfully optimized for OXP detection in oral solution and hydrogels administered to rabbits. A significant difference was found among various pharmacokinetic parameters by comparing the two groups including half-life (t1/2), tmax, Cmax, AUCtot MRT, Vz, and Lz.

Design and in vivo Evaluation of Gastro-retentive Floating Capsules of Amlodipine Besylate in Healthy Human Volunteers

2017 ◽  
Vol 10 (6) ◽  
pp. 3891-3899
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Chenna Madipalli Shalina ◽  
Vishnu Pulavarthy ◽  
Viswaja Medipally
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Sustained Release ◽  
In Vivo Studies ◽  
Amlodipine Besylate ◽  
In Vivo Evaluation ◽  
Healthy Human ◽  
Gastro Retentive

The aim of this study was to explore the application of Gelucire 43/01 for the design of sustained release gastro retentive drug delivery system of Amlodipine besylate. Gelucire 43/01 has been used in floating sustained release formulations to prolong gastric residence time and increase its bioavailability. Gelucire 43/01 in combination with HPMC and Polyox was used as a release retarding polymer. HPMC of various viscosity grades HPMC K4M, HPMC K15M and HPMC K100M in combination of Gelucire were tested to obtain optimal total floating time as well as controlled drug release for prolonged period. Melt granulation technique has been used to prepare gastro retentive Amlodipine besylate formulations. All the formulations were evaluated in vitro for their floating ability and drug release. The floating times of all tablet formulations were greater than 12h. HPMC K4M in combination with Gelucire as polymeric matrix enhanced the drug release due to addition of hydrophilic polymer facilitated the swelling and erosion of the tablets. Incorporation of low viscosity polymer HPMC K100 M resulted in optimal floating as well as drug release for longer time. In vivo studies of optimized formulation show floating ability for 6 h in stomach. The results indicate that Gelucire 43/01 in combination with dissolution enhancers HPMC increase the permeability of the wax matrix, which provides improved dissolution thereby bioavailability of Amlodipine besylate and can be considered as a carrier for the development of sustained release floating drug delivery systems.  

Development and In Vivo Evaluation of Mesalazine Colon Targeted Tablets

2019 ◽  
Vol 12 (3) ◽  
pp. 4552-4558
Author(s):  
Rawoof MD ◽  
Rajnarayana K ◽  
Ajitha M
Keyword(s):  
Drug Release ◽  
Wet Granulation ◽  
Time Intervals ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Ph Dependent ◽  
Rapid Hydrolysis

The main objective of the present study was to develop colon-targeted tablets of mesalazine by wet granulation method using 33 Response surface method with design of experiment software and HPMC K4M, Eudragit RL100, Ethyl cellulose and PVP K-30 used as pH dependent polymers. All the formulations (F1 to F27) were evaluated for the physicochemical parameters and were subjected to in vitro drug release studies. The amount of Mesalazine released from tablets at different time intervals was estimated by UV spectrophotometer. The formulation F26 released 98.16 % of mesalazine after 24 h, whereas marketed product drug release was 92.02 ± 2.15 after  24 h. From in vivo bioavailability studies, after oral administration of colon targeted tablet containing 400 mg mesalazine, the Cmax, Tmax, and AUC0–∞ of optimized formulation and marketed product was found to be 683.21 ± 0.03 ng/mL, 6.01 ± 0.04 h, 4150.12 ± 5.12 ng*h/mL and 445.34 ± 3.22 ng/mL, 4.00 ± 0.01 h, 3457.18 ± 5.32 ng*h/mL respectively. Cmax, Tmax and AUC values of optimized formulation were found to be significantly higher than of marketed product. The pH dependent tablet system is a promising vehicle for preventing rapid hydrolysis in gastric environment and improving oral bioavailability of mesalazine for the treatment of disease at colon region.

FORMULATION, OPTIMIZATION AND EVALUATION OF MOXIFLOXACIN HYDROCHLORIDE GASTRO RETENTIVE TABLETS

INDIAN DRUGS ◽  
2021 ◽  
Vol 58 (01) ◽  
pp. 79-84
Author(s):  
Raghavendra K. Gunda ◽  
◽  
A. Vijayalakshmi ◽  
K. Masilamani ◽  
◽  
...  
Keyword(s):  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Parameters ◽  
Wet Granulation ◽  
Statistical Parameters ◽  
Compression Technique ◽  
Ich Guidelines ◽  
Gastro Retentive

The objective of the current study was to develop gastro retentive formulation of moxifloxacin. HCl using various drug release modifiers and performing in vitro and in in vivo evaluations. Moxifloxacin is a novel synthetic fluoro quinolone antibacterial agent. Floating, muco adhesive tablets of moxifloxacin. HCl were prepared using variable amounts of HPMCK100M, Lannea coromandelica gum by direct compression technique and wet granulation technique, respectively. Formulations were developed, optimized and checked for pharmacopoeial tests. Results show that all the batches lie within the standard limits. Dissolution parameters of all formulations were sy=ubjected to kinetic fitting and various statistical parameters were determined. Formulation (FS5 ) containing 50 mg of HPMCK100M and 50 mg of LCG, is the best formulation showing similarity f2 =71.734, f1 = 4.271 with the marketed product (Avelox). It follows Higuchi's kinetics, non-fickian diffusion first order kinetics(n=0.717). In vivo studies were performed for the FS5 with 6 healthy rabbits and pharmacokinetic parameters were determined, compared with Avelox and it was found that FS5 produced similar results. Stability studies were performed for FS5 as per ICH guidelines. Results were found to be satisfactory. FS5 is expected to improve patient compliance by means of providing good clinical outcome

Sign in / Sign up

Export Citation Format

Share Document