scholarly journals Preparation and preclinical evaluation of aceclofenac loaded pectinate mucoadhesive microspheres

2012 ◽  
Vol 2 (1) ◽  
pp. 8 ◽  
Author(s):  
Santanu Chakraborty ◽  
Priyanka Nayak ◽  
Bala Murali Krishna ◽  
Madhusmruti Khandai ◽  
Ashoke Kumar Ghosh
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Polymer Concentration ◽  
Research Work ◽  
In Vivo Studies ◽  
Systemic Absorption ◽  
Cross Linking ◽  
Significant Difference

The aim of the present research work was to fabricate aceclofenac loaded pectinate microspheres by ionic gelation method and evaluate the effect of different cross-linking agents and polymer concentration on particle size, encapsulation efficacy and drug release behavior. It was also investigated that whether this pectinate dosage form was able to target the drug release in intestinal region and prevent the different side effect associated with the drug in stomach or not. It was observed that particle size, encapsulation efficacy and in vitro drug release were largely depended on polymer concentration and cross-linking agents. It was also observed that pectinate microspheres showed excellent pH depended mucoadhesive properties and they were able to restrict the drug release in stomach. <em>In vitro</em> drug release study showed that alminium-pectinate microspheres have more sustaining property as compared to barium-pectinate microspheres. Holm-Sidak multiple comparison analysis suggested a significant difference in measured t<sub>50%</sub> values among all the formulations with same cross-linking agent. In vivo studies revealed that the anti inflammatory and analgesic effects induced by pectinate microspheres were significantly high and prolonged as compared to pure drug. So, pectinate microspheres can be an excellent carrier for targeting the delivery of aceclofenac as well as help in improving the patient compliance by prolonging the systemic absorption.

scholarly journals Preparation, in vitro and in vivo evaluation of algino-pectinate bioadhesive microspheres: An investigation of the effects of polymers using multiple comparison analysis

2010 ◽  
Vol 60 (3) ◽  
pp. 255-266 ◽  
Author(s):  
Santanu Chakraborty ◽  
Madhusmruti Khandai ◽  
Anuradha Sharma ◽  
Nazia Khanam ◽  
Ch. Patra ◽  
...  
Keyword(s):  
Drug Release ◽  
Oral Delivery ◽  
Drug Carrier ◽  
Polymer Concentration ◽  
Multiple Comparison ◽  
Prolonged Release ◽  
Comparison Analysis ◽  
Significant Difference

Preparation,in vitroandin vivoevaluation of algino-pectinate bioadhesive microspheres: An investigation of the effects of polymers using multiple comparison analysisIonotropic gelation was used to entrap aceclofenac into algino-pectinate bioadhesive microspheres as a potential drug carrier for the oral delivery of this anti-inflammatory drug. Microspheres were investigatedin vitrofor possible sustained drug release and their usein vivoas a gastroprotective system for aceclofenac. Polymer concentration and polymer/drug ratio were analyzed for their influence on microsphere properties. The microspheres exhibited good bioadhesive property and showed high drug entrapment efficiency. Drug release profiles exhibited faster release of aceclofenac from alginate microspheres whereas algino-pectinate microspheres showed prolonged release. Dunnet's multiple comparison analysis suggested a significant difference in percent inhibition of paw edema when the optimized formulation was compared to pure drug. It was concluded that the algino-pectinate bioadhesive formulations exhibit promising properties of a sustained release form for aceclofenac and that they provide distinct tissue protection in the stomach.

scholarly journals Formulation and Evaluation of Fast Dissolving Film of Losartan Potassium

2021 ◽  
Vol 68 (1) ◽  
Author(s):  
Bhageerathy A ◽  
Sandhya Murali ◽  
eny Sara Thomas ◽  
Sigi Vasanthkumar ◽  
Prasanth V V
Keyword(s):  
Drug Release ◽  
Physical Stability ◽  
Losartan Potassium ◽  
In Vivo Studies ◽  
Disintegration Time ◽  
Drug Content ◽  
Weight Variation ◽  
Significant Difference

A total of nine formulations of fast dissolving films of Losartan Potassium were developed by solvent casting method using film forming polymers such as HPMC E5, E15 and E50 and other film modifiers. The appearances of films were transparent, thin, flexible, elastic, smooth and transparent. The weight variation ranged between 16.14 ± 0.192 and 17.31 ± 0.313 and showed that there was no significant difference in the weight of individual formulations. All the formulations showed more than 150 of folding endurance. The drug content was found to be in an acceptable range for all the formulations which indicated uniform distribution of drug. A rapid dissolution of all the film was observed by the dissolution test, in which above 90% of Losartan Potassium was released within 5 min. The formulation F1 showed maximum drug release (98.73) within 5 minutes. Based on the in vitro drug release, drug content and in vitro disintegration time it is found that F1 was selected as the best formulation. The formulations showed satisfactory physical stability at 40°C at 75 % RH. Losartan Potassium (LOSAR-25) is shown in Figure 4. From the results of comparative studies of marketed product and it found that F1 showed 98.73% release within 5 min and LOSAR 25 showed 90.76% release in 30 min. In vitro studies indicate that this potential drug delivery system has considerably good stability and release profile. Nevertheless, further in vivo studies are warranted to confirm these results.

Pharmacokinetic Profile of Oxaliplatin-Loaded pH-Responsive Hydrogels in Rabbits

2020 ◽  
Vol 26 (44) ◽  
pp. 5755-5763
Author(s):  
Kaleem Ullah ◽  
Shujaat Ali Khan ◽  
Muhammad Sohail ◽  
Abdul Mannan ◽  
Ghulam Murtaza
Keyword(s):  
Drug Release ◽  
Drug Loading ◽  
Oral Solution ◽  
In Vivo Studies ◽  
Pharmacokinetic Parameters ◽  
Platinum Compound ◽  
In Vivo Evaluation ◽  
Significant Difference

Background: Oxaliplatin (OXP), a 3rd generation platinum compound, which causes severe side effects due to; impulse high concentration in the bloodstream thereby exposing healthy cells at a high ratio, nonspecific delivery at the target site and non-compliance is administered intravenously. Objective: The project was aimed at the development, characterization, and in-vitro and in-vivo evaluation of pHresponsive hydrogels for oral administration of OXP. Methods: Hydrogel formulations were synthesized through a free radical polymerization technique followed by brief characterization using various techniques. The hydrogels were investigated for various in-vitro studies such as sol-gel, drug loading, swelling, drug release, and MTT-assay. While in-vivo studies such as oral tolerability, histopathology, and hematology studies were performed on rabbits. A simple and sensitive HPLC-UV method was optimized and the comparative pharmacokinetic study was performed in rabbits using OXP-oral solution and OXP-loaded hydrogels. Results: In-vitro characterization confirmed that the reactant was successfully crosslinked to form thermally stable hydrogels with decreased crystallinity and rough surface. Swelling and drug release showed that hydrogels were more responsive to basic pH (6.8 and 7.4) in comparison with pH 1.2. The blank hydrogels were cytocompatible as more than 95% of the cells were viable while free OXP and OXP-loaded hydrogels displayed dosedependent cytotoxic effect. In-vivo studies confirmed that chitosan and gelatin hydrogel suspension was well tolerable up to 3800 mg/kg and 4000 mg/kg of body weight, respectively. Hematology and serum chemistry reports were well within the range suggesting normal liver and kidney functions. Similarly, histopathology slides of rabbit vital organs were also found normal without causing any histopathological change. Conclusion: HPLC-UV method was successfully optimized for OXP detection in oral solution and hydrogels administered to rabbits. A significant difference was found among various pharmacokinetic parameters by comparing the two groups including half-life (t1/2), tmax, Cmax, AUCtot MRT, Vz, and Lz.

scholarly journals FORMULATION AND IN VIVO EVALUATION OF SELF-NANOEMULSIFYING DRUG DELIVERY SYSTEM OF RAMIPRIL IN WISTAR RATS

2021 ◽  
pp. 126-136
Author(s):  
NALLAPU JAYAPAL ◽  
YAMSANI VAMSHI VISHNU
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Systemic Absorption ◽  
Content Uniformity ◽  
Stability Studies ◽  
In Vitro Drug Release ◽  
Pure Drug

Objective: The aim was to formulate and evaluate self-nanoemulsifying drug delivery systems (SNEDDS) of ramipril, an antihypertensive drug to improve the solubility and bioavailability. Methods: Based on solubility studies oil phase (Sefsol 218), surfactant (Acrysol EL135), and cosurfactant (Transcutol P), respectively, were selected to prepare SNEDDS. Ramipril SNEDDS optimized employing box-Behnken design through the study of factors. All formulations were evaluated for particle size, zeta potential (ZP), polydispersity index (PDI), entrapment efficiency (EE), drug content, and in vitro drug release. The optimized formulation was characterized for Fourier transform infrared (FTIR), scanning electron microscopy (SEM), stability studies, and pharmacokinetic study. Results: The mean particle size, PDI, ZP, EE, content uniformity, and in vitro drug release profile of optimized ramipril-loaded SNEDDS (RF14) were found to be 75.3±2.21nm, 0.126±0.05, −24.4±5.78mV, 98.74±1.97%, 99.52±1.67%, and 98.65±1.73%, respectively. FTIR studies revealed that there is no incompatibility between drug and excipients, SEM images exhibited nanoparticles to be more porous and in spherical shape. Stability studies indicated formulation was stable for 6 months. In vivo studies were conducted for optimized formulation RF14, the Tmax was found to be 0.5±0.62 and 0.5±0.95 h for the optimized and commercial formulations respectively, while Cmax was 25.16±1.73 ng/mL was significant (p<0.05) as compared to the ramipril pure drug 8.02±0.086 ng/mL. AUC0-t of the SNEDDS formulation was higher 355.49±1.76ng h/ml compared to pure drug 116.57±1.64 ng h/ml indicated higher amount of drug concentration in blood proving better systemic absorption of ramipril from SNEDDS formulation as compared to the pure drug. Conclusion: It is concluded from the results that ramipril was successfully formulated into SNEDDS with higher concentration with fast action.

Preparation and Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets in Healthy Human Volunteers

2017 ◽  
Vol 10 (1) ◽  
pp. 3623-3630
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Haarika B ◽  
Jyothi Sri S ◽  
K Abbulu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Drug Bioavailability ◽  
Floating Tablets

The purpose of present investigation was to develop floating matrix tablets of gemifloxacin mesylate, which after oral administration could prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. Tablets containing drug, various viscosity grades of hydroxypropyl methylcellulose such as HPMC K4M and HPMC K15M as matrix forming agent, Sodium bicarbonate as gas-forming agent and different additives were tested for their usefulness in formulating gastric floating tablets by direct compression method. The physical parameters, in vitro buoyancy, release characteristics and in vivo radiographic study were investigated in this study. The gemifloxacin mesylate floating tablets were prepared using HPMC K4M polymer giving more sustained drug release than the tablet containing HPMC K15M. All these formulations showed floating lag time of 30 to 47 sec and total floating time more than 12 h. The drug release was decreased when polymer concentration increases and gas generating agent decreases. Formulation that contains maximum concen-tration of both HPMC K15M and sodium bicarbonate (F9) showing sufficiently sustained with 99.2% of drug release at 12 h. The drug release from optimized formulation follows Higuchi model that indicates the diffusion controlled release. The best formulation (F9) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent and the tablet remained in the stomach for about 6 h.   

Formulation and In Vivo Evaluation of Mucoadhesive Micro-spheres of Rebamipide, a Mucoprotective Drug for GIT Disorders

2018 ◽  
Vol 11 (3) ◽  
pp. 4089-4097
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Kanteepan P
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Amino Acid Derivative ◽  
Release Mechanism ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Percentage Yield

Rebamipide, an amino acid derivative of 2-(1H)-quinolinone, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. The current research study aimed to develop novel gastro-retentive mucoadhesive microspheres of rebamipide using ionotropic gelation technique. Studies of micromeritic properties confirmed that microspheres were free flowing with good packability. The in vitro drug release showed the sustained release of rebamipide up to 99.23 ± 0.13% within 12 h whereas marketed product displayed the drug release of 95.15 ± 0.23% within 1 h. The release mechanism from microspheres followed the zero-order and Korsmeyer-Peppas (R2 = 0.915, 0.969), respectively. The optimized M12 formulation displayed optimum features, such as entrapment efficiency 97%, particle size 61.94 ± 0.11 µm, percentage yield 98%, swelling index 95% and mucoadhesiveness was 97%. FTIR studies revealed no major incompatibility between drug and excipients. SEM confirmed the particles were of spherical in shape. Optimized formulation (M12) were stable at 40°C ± 2°C/75% RH ± 5% RH for 6 months. In vivo studies were performed and kinetic parameters like Cmax, Tmax, AUC0-t, AUC0-∞, t1/2, and Kel  were calculated. The marketed product Cmax (3.15 ± 0.05 ng/mL) was higher than optimized formulation (2.58 ± 0.03 ng/mL). The optimized formulation AUC0-t (15.25 ± 1.14 ng.hr/mL), AUC0-∞ (19.42 ± 1.24 ng.hr/mL) was significantly higher than that of marketed product AUC0-t (10.21 ± 1.26 ng.hr/mL) and AUC0-∞ (13.15 ± 0.05 ng.hr/mL). These results indicate an optimized formulation bioavailability of 2.5-fold greater than marketed product.  

Design and Evaluation of Long Acting Biodegradable PLGA Microspheres for Ocular Drug Delivery

2019 ◽  
Vol 10 ◽  
Author(s):  
Anjali Pandya ◽  
Rajani Athawale ◽  
Durga Puro ◽  
Geeta Bhagwat
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Degradation Products ◽  
Ex Vivo ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Rational Approach ◽  
Plga Microspheres ◽  
Long Acting

Background: The research work involves development of PLGA biodegradable microspheres loaded with dexamethasome for intraocular delivery. Objective: To design and evaluate long acting PLGA microspheres for ocular delivery of dexamethasone. Method: Present formulation involves the development of long acting dexamethasone loaded microspheres composed of a biodegradable controlled release polymer, Poly(D, L- lactide-co-glycolide) (PLGA), for the treatment of posterior segment eye disorders intravitreally. PLGA with monomer ratio of 50:50 of lactic acid to glycolic acid was used to achieve a drug release up to 45 days. Quality by Design approach was utilized for designing the experiments. Single emulsion solvent evaporation technique along with high pressure homogenization was used to facilitate formation of microspheres. Results: Particle size evaluation, drug content and drug entrapment efficiency were determined for the microspheres. Particle size and morphology was observed using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM) and microspheres were in the size range of 1-5 μm. Assessment of drug release was done using in vitro studies and transretinal permeation was observed by ex vivo studies using goat retinal tissues. Conclusion: Considering the dire need for prolonged therapeutic effect in diseases of the posterior eye, an intravitreal long acting formulation was designed. Use of biodegradable polymer with biocompatible degradation products was a rational approach to achieve this aim. Outcome from present research shows that developed microspheres would provide a long acting drug profile and reduce the frequency of administration thereby improving patient compliance.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals Development, Optimisation and Evaluation of Ketoprofen Lipospheres

2020 ◽  
Vol 11 (SPL4) ◽  
pp. 1853-1863
Author(s):  
Shubhra Rai ◽  
Gopal Rai ◽  
Ashish Budhrani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Research Work ◽  
Extended Period ◽  
Entrapment Efficiency ◽  
Inflammatory Activity ◽  
Scanning Calorimetry ◽  
Anti Inflammatory

Lipospheres represent a novel type of fat-based encapsulation system produced for the topical drug delivery of bioactive compounds. The goal of this research work was to develop lipospheres, including ketoprofen applied for topical skin drug delivery. Ketoprofen lipospheres were formulated by melt emulsification method using stearic acid and Phospholipon® 90G. The lipospheres were analysed in terms of particle size and morphology, entrapment efficiency, Differential scanning calorimetry, In-vitro drug release, In-vivo (Anti-inflammatory activity). Outcomes of research revealed that particle size was found to be 9.66 µm and entrapment efficiency 86.21 ± 5.79 %. In-vivo, the study of ketoprofen loaded lipospheres formulation shows a higher plain formulation concentration in plasma (5.61 mg/mL). For dermis, ketoprofen retention was 27.02 ± 5.4 mg/mL for the lipospheres formulation, in contrast to that of the plain formulation group (10.05 ± 2.8 mg/mL). The anti-inflammatory effect of liposphere drug delivery systems was assessed by the xylene induced ear oedema technique and compared with marketed products. Finally, it seems that the liposphere drug delivery system possesses superior anti-inflammatory activity as compared to the marketed product gel consistencies. Liposphere may be capable of entrapping the medicament at very high levels and controlling its release over an extended period. Liposphere furnishes a proper size for topical delivery as well as is based on non-irritating and non-toxic lipids; it’s a better option for application on damaged or inflamed skin.

scholarly journals FORMULATION, IN VITRO, AND IN VIVO EVALUATION OF TASTE-MASKED ORAL DISINTEGRATING TABLETS OF FEXOFENADINE HYDROCHLORIDE USING SEMISYNTHETIC AND NATURAL SUPERDISINTEGRANTS

2021 ◽  
pp. 99-108
Author(s):  
NAGADANI SWARNALATHA ◽  
VIDYAVATHI MARAVAJHALA
Keyword(s):  
Desirability Function ◽  
Research Work ◽  
In Vivo Studies ◽  
Taste Masking ◽  
Wet Granulation ◽  
Maximum Plasma ◽  
In Vivo Evaluation ◽  
Eudragit Epo

Objective: The aim of the present research work was to prepare and evaluate taste-masked oral disintegrating tablets (ODT) of Fexofenadine hydrochloride. Methods: In the present work, Eudragit EPO, a taste masking agent and Karaya gum (GK) (natural), Sodium starch glycolate, and Croscarmellose sodium (CCS) (semi-synthetic) super disintegrants in three ratios (3, 6,9%) were used. Taste masked granules were prepared by different ratios of the drug: Eudragit EPO (1:1, 1:1.5, 1:2) by wet granulation method. The optimized taste-masked granules (1:2) were selected by sensory evaluation test to prepare 9 Fexofenadine ODT (FH1-FH9) formulations. These were evaluated for different parameters. Then desirability function (DF) was calculated for all formulations using disintegration time (DT), time taken for the tablet to release 90% of the drug (t 90%), and % drug dissolved in 10 min (Q10) as significant parameters. Results: The best formulation (FH6) showed the highest DF value due to less DT and 100% in vitro drug release within 15 min. Thus, FH6 formulation containing 9% CCS was selected as the best among the prepared formulations to which in vivo studies were performed on rabbits to find maximum plasma concentration (Cmax), time taken to reach maximum concentration (tmax), area under the curve (AUC), rate of elimination (Kel), absorption rate (Ka) and half-life(t1/2) and compared with Fexofenadine (Allegra) marketed tablets. Total bioavailability was increased for the test formulation compared to the reference formulation. Conclusion: Fexofenadine was successfully prepared as ODT with increased AUC and decreased tmax to which stability studies were conducted which were found to be stable.

Sign in / Sign up

Export Citation Format

Share Document