scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals IN VIVO EVALUATION OF QUINAPRIL TRILAYERED MATRIX TABLETS

2021 ◽  
pp. 117-125
Author(s):  
ASHWIN K ◽  
RAMA MOHAN REDDY T
Keyword(s):  
Drug Release ◽  
Drug Concentration ◽  
In Vitro Release ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Matrix Tablet ◽  
In Vivo Evaluation ◽  
Drug Content

Objective: The aim was to design, formulate, and evaluate the trilayer matrix tablets incorporated with quinapril for extend drug release. Methods: Quinapril trilayer matrix tablets were formulated using design of experiment software wherein initially 27 formulations (QF1-QF27) were designed for active layer from which one best formulation was chosen based on drug content, swelling index and in vitro release studies. The chosen formulation was formulated into extended release trilayed matrix tablet by varying proportions of polymers by direct compression and was evaluated for various physicochemical parameters, drug release. Best formulation was characterized for Fourier transform infrared (FTIR), stability, and pharmacokinetic study. Results: Out of 27 formulations highest drug release was exhibited by QF16 (98.85%) which was formulated into trilayer matrix tablets (AQF16- HQF16). Out of which EQF16 was found to exhibit highest values with 98.42% swelling index, 99.56% drug content, and 99.72% drug release in 24 h. All quinapril trilayer formulations showed zero-order and first-order for marketed product. The optimized formulation EQF16 was found to exhibit no interaction with excipients interpreted by FTIR and no significant changes were observed after loading for stability. In vivo studies conducted using optimized formulation EQF16 attained peak drug concentration (Tmax) of 4.0±0.06 and 1.0±0.03 h for the optimized and commercial formulations, respectively, while mean maximum drug concentration (Cmax) was 302.64±0.07 ng/mL and was significant (p<0.05) as compared to the quinapril marketed product formulation 358.78±0.75 ng/mL. Conclusion: Hence, quinapril was successfully formulated into trilayer matrix tablet and found to be stable.

Formulation and In Vivo Evaluation of Mucoadhesive Micro-spheres of Rebamipide, a Mucoprotective Drug for GIT Disorders

2018 ◽  
Vol 11 (3) ◽  
pp. 4089-4097
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Kanteepan P
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Amino Acid Derivative ◽  
Release Mechanism ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Percentage Yield

Rebamipide, an amino acid derivative of 2-(1H)-quinolinone, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. The current research study aimed to develop novel gastro-retentive mucoadhesive microspheres of rebamipide using ionotropic gelation technique. Studies of micromeritic properties confirmed that microspheres were free flowing with good packability. The in vitro drug release showed the sustained release of rebamipide up to 99.23 ± 0.13% within 12 h whereas marketed product displayed the drug release of 95.15 ± 0.23% within 1 h. The release mechanism from microspheres followed the zero-order and Korsmeyer-Peppas (R2 = 0.915, 0.969), respectively. The optimized M12 formulation displayed optimum features, such as entrapment efficiency 97%, particle size 61.94 ± 0.11 µm, percentage yield 98%, swelling index 95% and mucoadhesiveness was 97%. FTIR studies revealed no major incompatibility between drug and excipients. SEM confirmed the particles were of spherical in shape. Optimized formulation (M12) were stable at 40°C ± 2°C/75% RH ± 5% RH for 6 months. In vivo studies were performed and kinetic parameters like Cmax, Tmax, AUC0-t, AUC0-∞, t1/2, and Kel  were calculated. The marketed product Cmax (3.15 ± 0.05 ng/mL) was higher than optimized formulation (2.58 ± 0.03 ng/mL). The optimized formulation AUC0-t (15.25 ± 1.14 ng.hr/mL), AUC0-∞ (19.42 ± 1.24 ng.hr/mL) was significantly higher than that of marketed product AUC0-t (10.21 ± 1.26 ng.hr/mL) and AUC0-∞ (13.15 ± 0.05 ng.hr/mL). These results indicate an optimized formulation bioavailability of 2.5-fold greater than marketed product.  

scholarly journals Design and evaluation of a novel floating osmotic pump system

2009 ◽  
Vol 12 (1) ◽  
pp. 129 ◽  
Author(s):  
Zhihong Zhang ◽  
Bo Peng ◽  
Xinggang Yang ◽  
Chao Wang ◽  
Guangmei Sun ◽  
...  
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
In Vitro Release ◽  
Osmotic Pump ◽  
Matrix Tablets ◽  
In Vivo Evaluation ◽  
Pump System ◽  
Conventional Tablet

PURPOSE. Find a novel delivery system for oral administration of drugs that have absorption window in the upper part of gastrointestinal (GI) track. METHODS. Dipyridamole was chosen as the model drug. A novel system, which combined the osmotic pump controlled release system and the floating system, was designed; matrix tablets (MT) were prepared for compares. The effects of pH, temperature and hydrodynamic conditions on drug release and the floating behavior of floating osmotic pump system (FOP) were investigated. In vivo evaluation was performed by a three-crossover study in six Beagle dogs relative to the conventional tablet (CT). Cumulative percent input in vivo was compared with that of in vitro release profiles. RESULTS. Floating behavior of FOP, drug releases from FOP and MT were sensitive to pH of dissolution media but not sensitive to temperature; the release of dipyridamole from MT was influenced by stirring rate while drug release from FOP was not. AUC of FOP was larger than MT and CT. The linear correlations between fraction absorbed in vivo and fraction dissolved in vitro was established for FOP-a true zero-order release formula, whereas only a nonlinear correlation was obtained for MT. CONCLUTIONS. FOP could be a novel way for the oral administration for drugs like dipyridamole.

Development of colon targeted matrix tablets of Metformin HCl using various concentration of selected polymers

2017 ◽  
Vol 1 (1) ◽  
pp. 01-02
Author(s):  
Swathi Goli
Keyword(s):  
Drug Release ◽  
Guar Gum ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
Release Mechanism ◽  
Drug Release Profile ◽  
Physical Changes ◽  
Metformin Hcl

The aim of the present study was to develop colon targeted matrix tablets of Metformin HCl using various conc. of selected polymers such as HPMC, Ethyl Cellulose Guar gum and combination of the same. Tablets were prepared by direct compression method and both pre-compression and post- compression parameters for all batches shows in the acceptable ranges. Short term accelerated stability studies was performed according to ICH guidelines temperature of 400±20 and relative humidity of 75%±5% RH to study any physical changes and chemical decomposition of drug, no formulation shown any physical or chemical changes. The compatibility of drugs, polymers and excipients were determined by FT-IR Spectroscopy results showed that the drug was compatible with polymers and all excipients. Dissolution studies were performed for 12 hours study in 1.2 pH for first 2 hrs then in 7.4 pH for next 3hrs followed by 6.8pH phosphate buffer at the temperature of 37±0.50C at 100rpm. The dissolution data so obtained was fitted to various mathematical kinetic models and the drug release followed mixed order and Higuchi’s model. To study release mechanism of drug from matrices the data were fitted to Koresmeyer-Peppas model and the release. In –vitro release profile of Metformin HCl from various polymers showed that drug increasing the conc. of polymers resulted in reduction in the release rate of drug (MTF1 to MTF12). Formulation containing combination of E.C-G.G, HPMC-G.G and E.C-HPMC showed drug release profile for MTF-12 about 38.72% after 12 hrs, MTF-11 about 40.66% after 12 hrs, for MTF-10 about 45.45% after 12 hrs. This is an indicative of retardation of drug release when polymer combination was changed. Results showed that the tablets with higher binding concentration showed minimum drug release. Combination of polymers shows greater retarding of drug release.

Preparation and In vivo Evaluation of Mucoadhesive Microspheres for Gastroretentive Delivery of Misoprostol

2017 ◽  
Vol 10 (2) ◽  
pp. 3676-3683
Author(s):  
Bhikshapathi D.V. R. N. ◽  
Ranjith Kumar K
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Gi Tract ◽  
In Vivo Evaluation ◽  
Upper Gi ◽  
Upper Gi Tract

The aim of the present investigation was to prepare and evaluate the Misoprostol mucoadhesive microspheres for gastroretentive drug delivery. Sodium alginate and sodium carboxy methyl cellulose were used as mucoadhesive polymers. Microsphere formulations were prepared using Ionotropic gelation technique. All the microspheres were characterized for particle size, scanning electron microscopy, FT-IR study, percentage yield, drug entrapment, stability studies and for in vitro release kinetics. Based on the results, the formulation M12 was selected as optimized formulation. In vitro drug release study of optimized formulation M12 showed 98.23% after 12 h in a controlled manner, which is essential for anti ulcer therapy. The marketed product shows the drug release of 95.23 within 1 h. The results of mucoadhesion study showed better retention of prepared microspheres (8) h in chic duodenal and jejunum regions of intestine. The results showed significant higher retention of mucoadhesive microspheres in upper GI tract. Pharmacokinetic study revealed that the bioavailability was found to be increased significantly when compared with marketed tablets. The drug release of Misoprostol optimized formulation M12 followed zero order, Higuchi and Korsmeyer-Peppas kinetics indicating diffusion controlled with non-Fickian (anomalous) transport thus it projected that delivered its active ingredient by coupled diffusion and erosion. Overall, the result indicated prolonged delivery with improved bioavailability of Misoprostol from mucoadhesive microspheres due to higher retention in the upper GI tract.

scholarly journals Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride

2011 ◽  
Vol 61 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Komuravelly Someshwar ◽  
Kalyani Chithaluru ◽  
Tadikonda Ramarao ◽  
K. Kumar
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Gastric Residence Time

Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride Tizanidine hydrochloride is an orally administered prokinetic agent that facilitates or restores motility through-out the length of the gastrointestinal tract. The objective of the present investigation was to develop effervescent floating matrix tablets of tizanidine hydrochloride for prolongation of gastric residence time in order to overcome its low bioavailability (34-40 %) and short biological half life (4.2 h). Tablets were prepared by the direct compression method, using different viscosity grades of hydroxypropyl methylcellulose (HPMC K4M, K15M and K100M). Tablets were evaluated for various physical parameters and floating properties. Further, tablets were studied for in vitro drug release characteristics in 12 hours. Drug release from effervescent floating matrix tablets was sustained over 12 h with buoyant properties. DSC study revealed that there is no drug excipient interaction. Based on the release kinetics, all formulations best fitted the Higuchi, first-order model and non-Fickian as the mechanism of drug release. Optimized formulation (F9) was selected based on the similarity factor (f2) (74.2), dissolution efficiency at 2, 6 and 8 h, and t50 (5.4 h) and was used in radiographic studies by incorporating BaSO4. In vivo X-ray studies in human volunteers showed that the mean gastric residence time was 6.2 ± 0.2 h.

scholarly journals In vitro Release Kinetics Study of Ranolazine from Swellable Hydrophilic Matrix Tablets

1970 ◽  
Vol 8 (1) ◽  
pp. 31-38 ◽  
Author(s):  
Mohammad Nezab Uddin ◽  
Ishtiaq Ahmed ◽  
Monzurul Amin Roni ◽  
Muhammad Rashedul Islam ◽  
Mohammad Habibur Rahman ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
High Viscosity ◽  
Matrix Tablets ◽  
Release Studies ◽  
The Matrix ◽  
Vitro Release

The objective of this study was to design oral sustained release matrix tablets of Ranolazine usinghydroxypropyl methylcellulose (HPMC) as the retardant polymer and to study the effect of formulation factors suchas polymer proportion and polymer viscosity on the release of drug. In vitro release studies were performed usingUSP type II apparatus (paddle method) in 900 mL of 0.1N HCl at 100 rpm for 12 hours. The release kinetics wasanalyzed using the zero-order, first order, Higuchi and Korsmeyer-Peppas equations to explore and explain themechanism of drug release from the matrix tablets. In vitro release studies revealed that the release rate decreasedwith increase in polymer proportion and viscosity grade. Mathematical analysis of the release kinetics indicated thatthe nature of drug release from the matrix tablets was dependent on drug diffusion and polymer relaxation andtherefore followed non-Fickian or anomalous release. The developed controlled release matrix tablets of Ranolazineprepared with high viscosity HPMC extended release up to 12 hours.Key words: Ranolazine; Sustained release; Methocel E50 Premium LV; Methocel K100LV CR; Methocel K4M CR;Methocel K15M CR.DOI: 10.3329/dujps.v8i1.5333Dhaka Univ. J. Pharm. Sci. 8(1): 31-38, 2009 (June)

scholarly journals Optimizing the Role of Polymer Blend in the Preparation of Acyclovir Controlled-Release Tablets: An Approach for Better Patient Compliance

2018 ◽  
Author(s):  
Barkat Khan ◽  
Faheem Haider ◽  
Kifayat Shah ◽  
Bushra Uzair ◽  
Kaijian Hou ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Release Kinetics ◽  
Immediate Release ◽  
Matrix Tablets ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Solubility Study ◽  
Release Data

This study was carried out to formulate and evaluate controlled release (CR) matrix tablets of Acyclovir using combination of hydrophilic and hydrophobic polymers. Acyclovir is a guanine derivative and is its half-life is short hence administered five times a day using immediate release tablets. Six formulations (F1-F6) were developed using Ethocel and Carbopol in equal combinations at drug-polymer (D:P) ratio of 10:5, 10:6, 10:7, 10:8, 10:9 and 10:10. Solubility study was performed using six different solvents. The compatibility studies were carried out using FTIR and DSC. According to USP, Quality Control and dimensional tests (hardness, friability, disintegration and thickness) were executed. In-vitro drug release studies of Acyclovir was carried out in dissolution apparatus using using 0.1 N HCl medium at constant temperature of 37 ± 0.5 ºC. In order to analyze the drug release kinetics, five different mathematical models were applied to the release data. The results showed that there was no incompatibility between drug and polymers. Physical QC tests were found within limits of USP. The release was retarded upto 24 hrs and non-fickian in-vitro drug release mechanism was found. A formulation developed using blend of polymers, showed excellent retention and desired release profiles thus providing absolute control for 24 hrs.

scholarly journals Design and Characterization of Combinational Domperidone-Famotidine Floating Drug Delivery System - In vitro and In vivo studies

2021 ◽  
Vol 62 (2) ◽  
pp. 144-162
Author(s):  
Mounika Chidurala ◽  
Raveendra Reddy J
Keyword(s):  
Drug Release ◽  
Oral Administration ◽  
Quality By Design ◽  
Release Kinetics ◽  
Cost Effective ◽  
Fickian Diffusion ◽  
In Vivo Studies ◽  
Pharmacokinetic Studies

Introduction: The drawbacks assosiated with oral administration of drugscan be controlled or minimized by gastro retentive formulations that remain buoyant within the stomach for an extended time by providing prolonged gastric retention and releasethe drug in an exceedingly extended manner thereby improving bioavailability. The current research was to develop and optimize Domperidone and Famotidine floating tablets with extended release by Quality by Design approach. Method: Based on QTPP (Quality Target Product Profile), CQAs (Critical Quality Attributes)wereidentified. Risk analysis by the evaluation of formulation and process parameters showed that optimizing the levels of polymers could reduce high risk to achieve the target profile. A 23factor experimental design with midpoints was selected for statistical analysis and optimization. Results: HPMC K100 and Carbopol 934P had a positive effect while ethyl cellulose demonstrated a negative effect on the selected responses. Drug release kinetics followed the first-order release with Higuchi diffusion and Fickian diffusion. Optimized formula satisfying all the required parameters was selected and evaluated. The predicted response values were in close agreement with experimental response values. Abdominal X-ray imaging after oral administration of the tablets on a healthy rabbit’s stomach confirmed the extended floating behavior with shorter lag time. In vivo, pharmacokinetic studies in rabbits revealed that the optimized formulation exhibited prolonged drug release with enhanced Cmax, tmax, AUCo-t, and t1/2 of an optimized product when compared to the marketed product. Conclusions: It has been concluded that the application of Quality by Design in the formulation and optimization reduced the number of trials to produce a cost-effective formula.

scholarly journals Development and evaluation of sustained release losartan potassium matrix tablet using kollidon SR as release retardant

2012 ◽  
Vol 48 (4) ◽  
pp. 621-628 ◽  
Author(s):  
Shahid Sarwar ◽  
Mohammad Salim Hossain
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
Polymer Concentration ◽  
In Vitro Release ◽  
Matrix Tablets ◽  
Losartan Potassium ◽  
Dissolution Time ◽  
Release Mechanism ◽  
Matrix Tablet

The present study was undertaken to develop sustained release (SR) matrix tablets of losartan potassium, an angiotensin-II antagonist for the treatment of hypertension. The tablets were prepared by direct compression method, along with Kollidon SR as release retardant polymer. The amount of losartan potassium remains fixed (100 mg) for all the three formulations whereas the amounts of Kollidon SR were 250 mg, 225 mg, and 200 mg for F-1, F-2, and F-3 respectively. The evaluation involves three stages: the micromeritic properties evaluation of granules, physical property studies of tablets, and in-vitro release kinetics studies. The USP apparatus type II was selected to perform the dissolution test, and the dissolution medium was 900 mL phosphate buffer pH 6.8. The test was carried out at 75 rpm, and the temperature was maintained at 37 ºC ± 0.5 ºC. The release kinetics was analyzed using several kinetics models. Higher polymeric content in the matrix decreased the release rate of drug. At lower polymeric level, the rate and extent of drug release were enhanced. All the formulations followed Higuchi release kinetics where the Regression co-efficient (R²) values are 0.958, 0.944, and 0.920 for F-1, F-2, and F-3 respectively, and they exhibited diffusion dominated drug release. Statistically significant (P<0.05) differences were found among the drug release profile from different level of polymeric matrices. The release mechanism changed from non-fickian (n=0.489 for F-1) to fickian (n=0.439 and 0.429 for F-2, and F-3 respectively) as a function of decreasing the polymer concentration. The Mean Dissolution Time (MDT) values were increased with the increase in polymer concentration.

Sign in / Sign up

Export Citation Format

Share Document