scholarly journals Comparative study of high-speed imaging of the initial phase of vegetable oil spray formation in a diesel injector

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Solimar Perera ◽  
Thamy Hayashi
Keyword(s):  
Comparative Study ◽  
Vegetable Oil ◽  
Initial Phase ◽  
High Speed ◽  
High Speed Imaging ◽  
Spray Formation

scholarly journals High-Speed Imaging of Spray Formation and Combustion in an Optical Engine: Effects of Injector Aging and TPGME as a Fuel Additive

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3105
Author(s):  
Xinda Zhu ◽  
Manu Mannazhi ◽  
Natascia Palazzo ◽  
Per-Erik Bengtsson ◽  
Öivind Andersson
Keyword(s):  
High Speed ◽  
Combustion Process ◽  
Soot Oxidation ◽  
Monomethyl Ether ◽  
Mie Scattering ◽  
Fuel Additive ◽  
High Speed Imaging ◽  
Spray Formation ◽  
Optical Engine ◽  
Injection Quantity

High-speed imaging of fuel sprays and combustion is conducted on a light-duty optical engine to investigate the effects of injector aging, with a focus on soot. The spray behaviors of one new and one aged injector are compared using Mie-scattering. In addition to this, the combustion process of a baseline diesel fuel and a blend with TPGME (tripropylene glycol monomethyl ether) are compared using natural luminosity (NL) imaging. TPGME is an oxygenated additive which can be used to reduce soot emissions. X-ray tomography of the two injectors demonstrates that the aging does not lead to significant geometry differences, nor to formation of dense internal nozzle deposits. Both injectors show similar liquid penetration and spreading angle. However, the aged injector shows a prolonged injection and more fuel dribbling after the injection events, leading to a higher injection quantity. The fuel quantity difference shows a larger impact on the NL at low load than the TPGME additive, indicating that the in-cylinder temperature is more important for soot oxidation than oxygen concentration under these conditions. At medium load, the NL is much less sensitive to small temperature variations, while the TPGME is more effective for soot reduction.

Experimental Measurement of In-Plane Rolling Nonpneumatic Tire Vibrations Using High-Speed Imaging

2019 ◽  
Vol 47 (3) ◽  
pp. 196-210
Author(s):  
Meghashyam Panyam ◽  
Beshah Ayalew ◽  
Timothy Rhyne ◽  
Steve Cron ◽  
John Adcox
Keyword(s):  
High Speed ◽  
Image Correlation ◽  
Dynamic Mode Decomposition ◽  
Dynamic Mode ◽  
High Speed Imaging ◽  
Correlation Algorithm ◽  
Mode Decomposition ◽  
Series Of Experiments ◽  
Plane Deformations ◽  
Dominant Frequencies

ABSTRACT This article presents a novel experimental technique for measuring in-plane deformations and vibration modes of a rotating nonpneumatic tire subjected to obstacle impacts. The tire was mounted on a modified quarter-car test rig, which was built around one of the drums of a 500-horse power chassis dynamometer at Clemson University's International Center for Automotive Research. A series of experiments were conducted using a high-speed camera to capture the event of the rotating tire coming into contact with a cleat attached to the surface of the drum. The resulting video was processed using a two-dimensional digital image correlation algorithm to obtain in-plane radial and tangential deformation fields of the tire. The dynamic mode decomposition algorithm was implemented on the deformation fields to extract the dominant frequencies that were excited in the tire upon contact with the cleat. It was observed that the deformations and the modal frequencies estimated using this method were within a reasonable range of expected values. In general, the results indicate that the method used in this study can be a useful tool in measuring in-plane deformations of rolling tires without the need for additional sensors and wiring.

High-Speed Imaging to Study an Auto-Oscillating Vocal Fold Replica for Different Initial Conditions

2017 ◽  
Vol 09 (05) ◽  
pp. 1750064 ◽  
Author(s):  
A. Van Hirtum ◽  
X. Pelorson
Keyword(s):  
Vocal Fold ◽  
High Speed ◽  
Initial Conditions ◽  
Vocal Folds ◽  
High Speed Imaging ◽  
Human Voice ◽  
Manual Intervention ◽  
Geometrical Features ◽  
Upstream Pressure

Experiments on mechanical deformable vocal folds replicas are important in physical studies of human voice production to understand the underlying fluid–structure interaction. At current date, most experiments are performed for constant initial conditions with respect to structural as well as geometrical features. Varying those conditions requires manual intervention, which might affect reproducibility and hence the quality of experimental results. In this work, a setup is described which allows setting elastic and geometrical initial conditions in an automated way for a deformable vocal fold replica. High-speed imaging is integrated in the setup in order to decorrelate elastic and geometrical features. This way, reproducible, accurate and systematic measurements can be performed for prescribed initial conditions of glottal area, mean upstream pressure and vocal fold elasticity. Moreover, quantification of geometrical features during auto-oscillation is shown to contribute to the experimental characterization and understanding.

scholarly journals Air mediates the impact of a compliant hemisphere on a rigid smooth surface

Soft Matter ◽  
2021 ◽  
Author(s):  
Siqi Zheng ◽  
Sam Dillavou ◽  
John M. Kolinski
Keyword(s):  
Elastic Body ◽  
Elastic Properties ◽  
Impact Velocity ◽  
Solid Surface ◽  
High Speed ◽  
Smooth Surface ◽  
High Speed Imaging ◽  
The Impact ◽  
Rigid Smooth

When a soft elastic body impacts upon a smooth solid surface, the intervening air fails to drain, deforming the impactor. High-speed imaging with the VFT reveal rich dynamics and sensitivity to the impactor's elastic properties and the impact velocity.

Sign in / Sign up

Export Citation Format

Share Document