scholarly journals Study of salt structures from gravity and seismic data in Santos Basin, Brazil

2016 ◽  
Vol 55 (3) ◽  
Author(s):  
Renata Regina Constantino Regina Constantino ◽  
Eder Cassola Molina ◽  
Iata Anderson de Souza
Keyword(s):  
Gravity Anomaly ◽  
Crustal Structure ◽  
Gravity Data ◽  
Geophysical Methods ◽  
Gravity Anomalies ◽  
Sedimentary Basins ◽  
Final Conclusion ◽  
Additional Information ◽  
Salt Layer ◽  
Modelling Studies

Seismic is one of the main methods used for the identification of structures and stratigraphic studies in sedimentary basins. In the Santos Basin, numerous 2D and 3D seismic surveys are being conducted in order to get a better ima-ge of the geological section to depths beyond the base of salt layer. Crustal modelling studies that make joint interpretation of seismic and gravity data are found in the literature, however there are few studies that relate gravity anomalies directly to salt structures. This work aims to associate gravity anomalies with salt structures from seismic and gravimetric interpretation. For studies aimed to model the crustal structure from gravity field data, the knowledge of two major discontinuities is required, the basement and the Moho. Such interfaces are often not easily seen by seismic and so, during this study, they were found by different methods involving analysis of gravity anomalies. The other interfaces involving density contrasts were analyzed based on seismic interpretation. The results showed that the obtained seismic geological interpretations may provide additional information when compared to gravity anomaly data. In all the modelled profiles, some geological information of the Santos Basin that are not visible in the seismic, could be interpreted according to the geological model and the adjustment of gravity anomaly curves. As a final conclusion of this work, it is suggested that the combined analysis of the two cited geophysical methods, can provide important information about the crustal structure and to assist in modelling the salt layer.

Stable inversion of gravity anomalies of sedimentary basins with nonsmooth basement reliefs and arbitrary density contrast variations

Geophysics ◽  
1999 ◽  
Vol 64 (3) ◽  
pp. 754-764 ◽  
Author(s):  
Valéria C. F. Barbosa ◽  
João B. C. Silva ◽  
Walter E. Medeiros
Keyword(s):  
Gravity Anomaly ◽  
Gravity Data ◽  
A Priori ◽  
Bouguer Anomaly ◽  
Gravity Anomalies ◽  
Sedimentary Basins ◽  
Upper And Lower Bounds ◽  
Density Contrast ◽  
Good Precision ◽  
Rift Basins

We present a new, stable method for interpreting the basement relief of a sedimentary basin which delineates sharp discontinuities in the basement relief and incorporates any law known a priori for the spatial variation of the density contrast. The subsurface region containing the basin is discretized into a grid of juxtaposed elementary prisms whose density contrasts are the parameters to be estimated. Any vertical line must intersect the basement relief only once, and the mass deficiency must be concentrated near the earth’s surface, subject to the observed gravity anomaly being fitted within the experimental errors. In addition, upper and lower bounds on the density contrast of each prism are introduced a priori (one of the bounds being zero), and the method assigns to each elementary prism a density contrast which is close to either bound. The basement relief is therefore delineated by the contact between the prisms with null and nonnull estimated density contrasts, the latter occupying the upper part of the discretized region. The method is stabilized by introducing constraints favoring solutions having the attributes (shared by most sedimentary basins) of being an isolated compact source with lateral borders dipping either vertically or toward the basin center and having horizontal dimensions much greater than its largest vertical dimension. Arbitrary laws of spatial variations of the density contrast, if known a priori, may be incorporated into the problem by assigning suitable values to the nonnull bound of each prism. The proposed method differs from previous stable methods by using no smoothness constraint on the interface to be estimated. As a result, it may be applied not only to intracratonic sag basins where the basement relief is essentially smooth but also to rift basins whose basements present discontinuities caused by faults. The method’s utility in mapping such basements was demonstrated in tests using synthetic data produced by simulated rift basins. The method mapped with good precision a sequence of step faults which are close to each other and present small vertical slips, a feature particularly difficult to detect from gravity data only. The method was also able to map isolated discontinuities with large vertical throw. The method was applied to the gravity data from Reco⁁ncavo basin, Brazil. The results showed close agreement with known geological structures of the basin. It also demonstrated the method’s ability to map a sequence of alternating terraces and structural lows that could not be detected just by inspecting the gravity anomaly. To demostrate the method’s flexibility in incorporating any a priori knowledge about the density contrast variation, it was applied to the Bouguer anomaly over the San Jacinto Graben, California. Two different exponential laws for the decrease of density contrast with depth were used, leading to estimated maximum depths between 2.2 and 2.4 km.

scholarly journals Joint Gravity and Seismic Reflection Methods to Characterize the Deep Aquifers in Arid Ain El Beidha Plain (Central Tunisia, North Africa)

Water ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1310
Author(s):  
Hajer Azaiez ◽  
Hakim Gabtni ◽  
Mourad Bédir
Keyword(s):  
Seismic Reflection ◽  
Large Scale ◽  
Seismic Analysis ◽  
Gravity Data ◽  
Geophysical Methods ◽  
Gravity Anomalies ◽  
Integrated Approach ◽  
Central Tunisia ◽  
Deep Aquifers ◽  
Advanced Analysis

Electric resistivity sounding and tomography, as well as electromagnetic sounding, are the classical methods frequently used for hydrogeological studies. In this work, we propose the development and implementation of an original integrated approach using the unconventional hydro–geophysical methods of gravity and seismic reflection for the fast, large–scale characterization of hydrogeological potential using the Ain El Beidha plain (central Tunisia) as an analogue. Extending the values of vintage petroleum seismic reflection profiles and gravity data, in conjunction with available geological and hydrogeological information, we performed an advanced analysis to characterize the geometry of deep tertiary (Oligocene and Eocene) aquifers in this arid area. Residual and tilt angle gravity maps revealed that most gravity anomalies have a short wavelength. The study area was mainly composed of three major areas: the Oued Ben Zitoun and Ain El Beidha basins, which are both related to negative gravity trends corresponding to low–density subsiding depocenters. These basins are separated by an important NE–SW trend called “El Gonna–J. El Mguataa–Kroumet Zemla” gravity high. Evaluation of the superposition of detected lineaments and Euler deconvolution solutions’ maps showed several NE–SW and N–S relay system faults. The 3D density inversion model using a lateral and vertical cutting plane suggested the presence of two different tectonic styles (thin VS thick). Results from the gravity analysis were in concordance with the seismic analysis. The deep Oligocene and Eocene seismic horizons were calibrated to the hydraulic wells and surrounding outcrops. Oligocene and Eocene geological reservoirs appear very fractured and compartmented. The faulting network also plays an important role in enhancing groundwater recharge process of the Oligocene and Eocene aquifers. Finally, generated isochron maps provided an excellent opportunity to develop future comprehensive exploration surveys over smaller and more favorable areas’ sub–basins.

scholarly journals Basin Depth Mapping Beneath Wellington City Based on Residual Gravity Anomalies

2021 ◽  
Author(s):  
◽  
Alistair Stronach
Keyword(s):  
Gravity Anomaly ◽  
Sedimentary Basin ◽  
Gravity Data ◽  
Three Dimensional ◽  
Maximum Amplitude ◽  
Central Business District ◽  
Gravity Anomalies ◽  
Depth Map ◽  
Capital City ◽  
Detailed Knowledge

<p><b>New Zealand’s capital city of Wellington lies in an area of high seismic risk, which is further increased by the sedimentary basin beneath the Central Business District (CBD). Ground motion data and damage patterns from the 2013 Cook Strait and 2016 Kaikōura earthquakes indicate that two- and three-dimensional amplification effects due to the Wellington sedimentary basin may be significant. These effects are not currently accounted for in the New Zealand Building Code. In order for this to be done, three-dimensional simulations of earthquake shaking need to be undertaken, which requires detailed knowledge of basin geometry. This is currently lacking, primarily because of a dearth of deep boreholes in the CBD area, particularly in Thorndon and Pipitea where sediment depths are estimated to be greatest.</b></p> <p>A new basin depth map for the Wellington CBD has been created by conducting a gravity survey using a modern Scintrex CG-6 gravity meter. Across the study area, 519 new high precision gravity measurements were made and a residual anomaly map created, showing a maximum amplitude anomaly of -6.2 mGal with uncertainties better than ±0.1 mGal. Thirteen two-dimensional geological profiles were modelled to fit the anomalies, then combined with existing borehole constraints to construct the basin depth map. </p> <p>Results indicate on average greater depths than in existing models, particularly in Pipitea where depths are interpreted to be as great as 450 m, a difference of 250 m. Within 1 km of shore depths are interpreted to increase further, to 600 m. The recently discovered basin bounding Aotea Fault is resolved in the gravity data, where the basement is offset by up to 13 m, gravity anomaly gradients up to 8 mGal/km are observed, and possible multiple fault strands identified. A secondary strand of the Wellington Fault is also identified in the north of Pipitea, where gravity anomaly gradients up to 18 mGal/km are observed.</p>

Towards an updated, enhanced regional gravity field solution for Antarctica

2021 ◽  
Author(s):  
Mirko Scheinert ◽  
Philipp Zingerle ◽  
Theresa Schaller ◽  
Roland Pail ◽  
Martin Willberg
Keyword(s):  
Gravity Anomaly ◽  
Gravity Field ◽  
Gravity Data ◽  
Gravity Anomalies ◽  
Data Set ◽  
Gravity Field Model ◽  
Terrestrial Gravity ◽  
Field Solution ◽  
Gravity Disturbances ◽  
Regional Gravity

&lt;p&gt;In the frame of the IAG Subcommission 2.4f &amp;#8220;Gravity and Geoid in Antarctica&amp;#8221; (AntGG) a first Antarctic-wide grid of ground-based gravity anomalies was released in 2016 (Scheinert et al. 2016). That data set was provided with a grid space of 10 km and covered about 73% of the Antarctic continent. Since then a considerably amount of new data has been made available, mainly collected by means of airborne gravimetry. Regions which were formerly void of any terrestrial gravity observations and have now been surveyed include especially the polar data gap originating from GOCE satellite gravimetry. Thus, it is timely to come up with an updated and enhanced regional gravity field solution for Antarctica. For this, we aim to improve further aspects in comparison to the AntGG 2016 solution: The grid spacing will be enhanced to 5 km. Instead of providing gravity anomalies only for parts of Antarctica, now the entire continent should be covered. In addition to the gravity anomaly also a regional geoid solution should be provided along with further desirable functionals (e.g. gravity anomaly vs. disturbance, different height levels).&lt;/p&gt;&lt;p&gt;We will discuss the expanded AntGG data base which now includes terrestrial gravity data from Antarctic surveys conducted over the past 40 years. The methodology applied in the analysis is based on the remove-compute-restore technique. Here we utilize the newly developed combined spherical-harmonic gravity field model SATOP1 (Zingerle et al. 2019) which is based on the global satellite-only model GOCO05s and the high-resolution topographic model EARTH2014. We will demonstrate the feasibility to adequately reduce the original gravity data and, thus, to also cross-validate and evaluate the accuracy of the data especially where different data set overlap. For the compute step the recently developed partition-enhanced least-squares collocation (PE-LSC) has been used (Zingerle et al. 2021, in review; cf. the contribution of Zingerle et al. in the same session). This method allows to treat all data available in Antarctica in one single computation step in an efficient and fast way. Thus, it becomes feasible to iterate the computations within short time once any input data or parameters are changed, and to easily predict the desirable functionals also in regions void of terrestrial measurements as well as at any height level (e.g. gravity anomalies at the surface or gravity disturbances at constant height).&lt;/p&gt;&lt;p&gt;We will discuss the results and give an outlook on the data products which shall be finally provided to present the new regional gravity field solution for Antarctica. Furthermore, implications for further applications will be discussed e.g. with respect to geophysical modelling of the Earth&amp;#8217;s interior (cf. the contribution of Schaller et al. in session G4.3).&lt;/p&gt;

Gravity interpretation using Fourier transforms and simple geometrical models with exponential density contrast

Geophysics ◽  
1993 ◽  
Vol 58 (8) ◽  
pp. 1074-1083 ◽  
Author(s):  
D. Bhaskara Rao ◽  
M. J. Prakash ◽  
N. Ramesh Babu
Keyword(s):  
Los Angeles ◽  
Fourier Transforms ◽  
Gravity Data ◽  
Gravity Anomalies ◽  
Sedimentary Basins ◽  
Density Contrast ◽  
Model Parameters ◽  
Exponential Density ◽  
Exponential Density Contrast ◽  
Gravity Interpretation

The decrease of density contrast in sedimentary basins can often be approximated by an exponential function. Theoretical Fourier transforms are derived for symmetric trapezoidal, vertical fault, vertical prism, syncline, and anticline models. This is desirable because there are no equivalent closed form solutions in the space domain for these models combined with an exponential density contrast. These transforms exhibit characteristic minima, maxima, and zero values, and hence graphical methods have been developed for interpretation of model parameters. After applying end corrections to improve the discrete transforms of observed gravity data, the transforms are interpreted for model parameters. This method is first tested on two synthetic models, then applied to gravity anomalies over the San Jacinto graben and Los Angeles basin.

A Hybrid PCG- Bat Algorithm for 2D Gravity Inversion: Applications for Ore Deposits Exploration and Interpretation of Sedimentary Basins

2020 ◽  
Author(s):  
Mohamed Abdrabou ◽  
Maha Abdelazeem ◽  
Mohamed Gobashy
Keyword(s):  
Conjugate Gradient ◽  
Hybrid Algorithm ◽  
2D Gravity ◽  
Gravity Data ◽  
Gravity Anomalies ◽  
Sedimentary Basins ◽  
Bat Algorithm ◽  
Ore Deposits ◽  
Preconditioned Conjugate Gradient ◽  
Residual Gravity

&lt;p&gt;Geophysical data such as gravity data can be inverted to get a subsurface image, which depicts the subsurface distribution of physical property. Consequently, inversion of geophysical data has an effective role for interpreting measured geophysical anomalies in hydrocarbons and mineral applications. Interest about ore deposits exploration and sedimentary basins interpretation is associated with their economic importance. The presence of sedimentary basins gives lower amplitude of gravity anomalies with negative signals, due to the negative density contrast as these sedimentary basins have lower density than that of the neighboring basement rocks. In prospecting ore deposits, studying the spatial distributions of densities in the subsurface is essential of significance.Two dimensional forward modelling strategy can be done via locating the rectangular cells with fixed size directly underneath the location of the observed data points using regular grid discretization. Density vector of the subsurface rectangular cells are obtained via solving the 2D gravity inverse problem by optimizing an objective function (i.e., the differences between observed and inverted residual gravity data sets). In this work, a hybrid algorithm merging a bat (BAT) algorithm with the preconditioned conjugate gradient (PCG) method is suggested as a mean for inverting surface gravity anomalies to obtain the density distribution in the subsurface. Like the hybrid, minimization algorithm has the capability to make use of the advantages of both two techniques. In this hybrid algorithm, the BAT algorithm was utilized to construct an initial solution for the PCG technique. The BAT optimizer acts as a rapid build-up of the model, whereas the second modifies the finer model approximated solution. This modern algorithm was firstly applied on a free-noise synthetic data and to a noisy data with three different levels of random noise, and good results obtained through the inversion. The validity and applicability of our algorithm are applied to real residual gravity anomalies across the San Jacinto graben in southern California, USA, and Sierra Mayor - Sierra Pinta graben, USA and prospecting of the Poshi Cu-Ni deposits, Xinjiang, northwest China. The obtained results are in excellent accordance with those produced by researchers in the published literature.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;&lt;strong&gt;Keywords: &lt;/strong&gt;Gravity data, 2D Inversion, BAT algorithm, Preconditioned Conjugate Gradient, Sedimentary Basins.&lt;/p&gt;

scholarly journals GRAVITY ANOMALY ASSESSMENT USING GGMS AND AIRBORNE GRAVITY DATA TOWARDS BATHYMETRY ESTIMATION

2016 ◽  
Vol XLII-4/W1 ◽  
pp. 287-297
Author(s):  
A. Tugi ◽  
A. H. M. Din ◽  
K. M. Omar ◽  
A. S. Mardi ◽  
Z. A. M. Som ◽  
...  
Keyword(s):  
Gravity Anomaly ◽  
Gravity Field ◽  
Ocean Circulation ◽  
Gravity Data ◽  
Gravity Anomalies ◽  
Airborne Gravity ◽  
Satellite Gravity ◽  
Earth’S Gravity Field ◽  
Explorer Mission ◽  
Satellite Gravity Missions

The Earth’s potential information is important for exploration of the Earth’s gravity field. The techniques of measuring the Earth’s gravity using the terrestrial and ship borne technique are time consuming and have limitation on the vast area. With the space-based measuring technique, these limitations can be overcome. The satellite gravity missions such as Challenging Mini-satellite Payload (CHAMP), Gravity Recovery and Climate Experiment (GRACE), and Gravity-Field and Steady-State Ocean Circulation Explorer Mission (GOCE) has introduced a better way in providing the information on the Earth’s gravity field. From these satellite gravity missions, the Global Geopotential Models (GGMs) has been produced from the spherical harmonics coefficient data type. The information of the gravity anomaly can be used to predict the bathymetry because the gravity anomaly and bathymetry have relationships between each other. There are many GGMs that have been published and each of the models gives a different value of the Earth’s gravity field information. Therefore, this study is conducted to assess the most reliable GGM for the Malaysian Seas. This study covered the area of the marine area on the South China Sea at Sabah extent. Seven GGMs have been selected from the three satellite gravity missions. The gravity anomalies derived from the GGMs are compared with the airborne gravity anomaly, in order to figure out the correlation (R<sup>2</sup>) and the root mean square error (RMSE) of the data. From these assessments, the most suitable GGMs for the study area is GOCE model, GO_CONS_GCF_2_TIMR4 with the R<sup>2</sup> and RMSE value of 0.7899 and 9.886 mGal, respectively. This selected model will be used in the estimating the bathymetry for Malaysian Seas in future.

scholarly journals On the use of gravity data in delineating geologic features of interest for geothermal exploration in the Geneva Basin (Switzerland): prospects and limitations

2021 ◽  
Vol 114 (1) ◽  
Author(s):  
L. Guglielmetti ◽  
A. Moscariello
Keyword(s):  
Gravity Data ◽  
Gravity Anomalies ◽  
Sedimentary Basins ◽  
Structural Knowledge ◽  
Gravity Modelling ◽  
Geothermal Exploration ◽  
First Order ◽  
Geological Features ◽  
Subsurface Investigation ◽  
Potential Use

AbstractGravity data retrieved from the Bureau Gravimétrique International and the Gravimetric Atlas of Switzerland have been used to evaluate their applicability as a subsurface investigation tool to assess key geological features in support of the geothermal exploration in the Geneva Basin (GB). In this context, the application of an effective processing workflow able to produce reliable residual gravity anomalies was implemented as a crucial first step to investigate whether and to what level gravity anomalies can be correlated to geologic sources of geothermal interest. This study focusses on the processing workflow applied to publicly available gravity data, including the quantification of the uncertainty. This was then also used for first-order 2D forward gravity modelling. The resulting residual anomalies demonstrate the potential use of gravity investigations for geothermal exploration in sedimentary basins, and also reveal areas of significant, irreparable misfit, which calls for the use of complementary data and 3D subsurface structural knowledge. The results of such investigations will be presented in subsequent studies.

scholarly journals Basin Depth Mapping Beneath Wellington City Based on Residual Gravity Anomalies

2021 ◽  
Author(s):  
Alistair Stronach
Keyword(s):  
Gravity Anomaly ◽  
Sedimentary Basin ◽  
Gravity Data ◽  
Three Dimensional ◽  
Maximum Amplitude ◽  
Central Business District ◽  
Gravity Anomalies ◽  
Depth Map ◽  
Capital City ◽  
Detailed Knowledge

<p><b>New Zealand’s capital city of Wellington lies in an area of high seismic risk, which is further increased by the sedimentary basin beneath the Central Business District (CBD). Ground motion data and damage patterns from the 2013 Cook Strait and 2016 Kaikōura earthquakes indicate that two- and three-dimensional amplification effects due to the Wellington sedimentary basin may be significant. These effects are not currently accounted for in the New Zealand Building Code. In order for this to be done, three-dimensional simulations of earthquake shaking need to be undertaken, which requires detailed knowledge of basin geometry. This is currently lacking, primarily because of a dearth of deep boreholes in the CBD area, particularly in Thorndon and Pipitea where sediment depths are estimated to be greatest.</b></p> <p>A new basin depth map for the Wellington CBD has been created by conducting a gravity survey using a modern Scintrex CG-6 gravity meter. Across the study area, 519 new high precision gravity measurements were made and a residual anomaly map created, showing a maximum amplitude anomaly of -6.2 mGal with uncertainties better than ±0.1 mGal. Thirteen two-dimensional geological profiles were modelled to fit the anomalies, then combined with existing borehole constraints to construct the basin depth map. </p> <p>Results indicate on average greater depths than in existing models, particularly in Pipitea where depths are interpreted to be as great as 450 m, a difference of 250 m. Within 1 km of shore depths are interpreted to increase further, to 600 m. The recently discovered basin bounding Aotea Fault is resolved in the gravity data, where the basement is offset by up to 13 m, gravity anomaly gradients up to 8 mGal/km are observed, and possible multiple fault strands identified. A secondary strand of the Wellington Fault is also identified in the north of Pipitea, where gravity anomaly gradients up to 18 mGal/km are observed.</p>

scholarly journals Usporedba različitih pristupa Bouguer-ove redukcije na temelju satelitskih gravimetrijskih podataka

Geofizika ◽  
2020 ◽  
Vol 37 (2) ◽  
pp. 237-261
Author(s):  
Fan Luo ◽  
Xin Tao ◽  
Guangming Fu ◽  
Chong Zhang ◽  
Kun Zhang ◽  
...  
Keyword(s):  
Gravity Anomaly ◽  
Gravity Data ◽  
Gravity Anomalies ◽  
Gravitational Effect ◽  
Seismic Profile ◽  
Bouguer Gravity ◽  
Seismic Profiles ◽  
Satellite Gravity ◽  
Free Air ◽  
Free Air Gravity

Satellite gravity data are widely used in the field of geophysics to study deep structures at the regional and global scales. These data comprise free-air gravity anomaly data, which usually need to be corrected to a Bouguer gravity anomaly for practical application. Bouguer reduction approaches can be divided into two methods based on the coordinate system: the spherical coordinates method (SBG) and the Cartesian coordinates method; the latter is further divided into the CEBG and CBG methods, which do and do not include the Earth’s curvature correction. In this paper, free-air gravity anomaly data from the eastern Tibetan Plateau and its adjacent areas were used as the basic data to compare the CBG, CEBG, and SBG Bouguer gravity correction methods. The comparison of these three Bouguer gravity correction methods shows that the effect of the Earth’s curvature on the gravitational effect increases with increasing elevation in the study area. We want to understand the inversion accuracy for the data obtained by different Bouguer gravity reduction approaches. The depth distributions of the Moho were obtained by the interface inversion of the Bouguer gravity anomalies obtained by the CBG, CEBG, and SBG, and active seismic profiles were used as references for comparison and evaluation. The results show that the depths of the Moho obtained by the SBG inversion are more consistent with the measured seismic profile depths. Therefore, the SBG method is recommended as the most realistic approach in the process of global or regional research employing gravity data.

Sign in / Sign up

Export Citation Format

Share Document