scholarly journals THE INFLUENCE OF PROCESS PARAMETERS TOWARD COLLAR HEIGHT ON INCREMENTAL BACKWARD HOLE-FLANGING PROCESS

2017 ◽  
Vol 2 (1) ◽  
pp. 23
Author(s):  
Muhammad Fakhruddin ◽  
Mochammad Agus Choiron ◽  
Anindito Purnowidodo
Keyword(s):  
Process Parameters ◽  
Metal Forming ◽  
Hole Diameter ◽  
Feed Speed ◽  
Cnc Machine ◽  
Step Size ◽  
Influence Of Process Parameters ◽  
Incremental Sheet Metal Forming ◽  
Tool Diameter ◽  
Hole Flanging

Abstract                  The experimental study of the influence of process parameters towards collar height on incremental backward hole-flanging (IBHF) process with aluminium plate workpiece was presented in this paper. The effect of process parameters toward collar height which produced by IBHF process was investigated. Experiments were performed with a CNC machine, a 30o conical forming tool, and aluminium plates. The process parameters are feed speed with two levels, radial forming step size with three, and axial forming step size with three levels. Some parameters were kept constant, i.e., spindle speed, initial hole diameter, final hole diameter, and conical forming tool diameter. Digital Vernier caliper was used to measure the height of the collar. Experimental results of IBHF process have shown that the feed speed (vf) parameter has no effect toward collar height. Increased radial forming step size (Δx/y), increased the collar height also. Increased the axial forming step size (Δz) reduced the collar height. Keywords: hole-flanging, incremental sheet metal forming, incremental backward.

An Analytical Model to Reduce Spring-Back in Incremental Sheet Metal Forming (ISMF) Process

2009 ◽  
Vol 83-86 ◽  
pp. 1113-1120 ◽  
Author(s):  
Mehdi Vahdati ◽  
Mohammad Sedighi ◽  
Hossein Khoshkish
Keyword(s):  
Sheet Metal ◽  
Process Parameters ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Sheet Thickness ◽  
Spring Back ◽  
Step Size ◽  
Influence Of Process Parameters ◽  
Incremental Sheet Metal Forming ◽  
Tool Diameter

In this paper, spring-back and its effect on geometrical and dimensional accuracy of incremental sheet metal forming (ISMF) process has been studied. The influence of process parameters such as: vertical step size, sheet thickness, tool diameter, feed rate and spindle speed have been investigated. A series of experimental tests have been carried out for a straight groove bead-shape part made of aluminum sheets. A reliable statistical analysis has been carried out to extract the importance of each parameter. The obtained model permits to select appropriate process parameters to reduce spring-back effectively.

scholarly journals Effect of Process Parameters and Preheating Temperature on Surface Roughness and Thickness Distribution in Hole Flanging using Incremental Sheet Metal Forming

2019 ◽  
Vol 8 (12S2) ◽  
pp. 84-87
Keyword(s):  
Surface Roughness ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Thickness Distribution ◽  
Research Work ◽  
Preheating Temperature ◽  
Incremental Sheet Metal Forming ◽  
Best Parameter ◽  
Hole Flanging

Incremental Sheet metal forming is a die less method of forming which offers high formability. In this research work; effect of step depth, tool rotation speed and preheating temperature on surface roughness and thinning of flange wall is investigated in hole flanging using incremental forming. The parameter optimization is carried out by Taguchi method. Grey relational analysis is carried out to obtain best parameter combination.

scholarly journals Influence of process parameters on surface roughness and forming time of Al-1100 sheet in incremental sheet metal forming

2019 ◽  
Vol 13 (2) ◽  
pp. 4911-4927
Author(s):  
Swagatika Mohanty ◽  
Srinivasa Prakash Regalla ◽  
Yendluri Venkata Daseswara Rao
Keyword(s):  
Surface Roughness ◽  
Response Surface ◽  
Sheet Metal ◽  
Process Parameters ◽  
Sheet Metal Forming ◽  
Feed Rate ◽  
Metal Forming ◽  
Wall Angle ◽  
Surface Method ◽  
Incremental Sheet Metal Forming

Product quality and production time are critical constraints in sheet metal forming. These are normally measured in terms of surface roughness and forming time, respectively. Incremental sheet metal forming is considered as most suitable for small batch production specifically because it is a die-less manufacturing process and needs only a simple generic fixture. The surface roughness and forming time depend on several process parameters, among which the wall angle, step depth, feed rate, sheet thickness, and spindle speed have a greater impact on forming time and surface roughness. In the present work, the effect of step depth, feed rate and wall angle on the surface roughness and forming time have been investigated for constant 1.2 mm thick Al-1100 sheet and at a constant spindle speed of 1300 rpm. Since the variable effects of these parameters necessitate multi-objective optimization, the Taguchi L9 orthogonal array has been used to plan the experiments and the significance of parameters and their interactions have been determined using analysis of variance (ANOVA) technique. The optimum response has been brought out using response surfaces. Finally, the findings of response surface method have been validated by conducting additional experiments at the intermediate values of the parameters and these results were found to be in agreement with the predictions of Taguchi method and response surface method.

Experimental Investigation on Surface/Subsurface Damage in Rotary Ultrasonic Machining of Glass BK7

2013 ◽  
Vol 325-326 ◽  
pp. 1357-1361 ◽  
Author(s):  
Yan Hua Huang ◽  
Dong Xi Lv ◽  
Yong Jian Tang ◽  
Hong Xiang Wang ◽  
Hai Jun Zhang
Keyword(s):  
Surface Roughness ◽  
Ultrasonic Vibration ◽  
Process Parameters ◽  
Subsurface Damage ◽  
Spindle Speed ◽  
Feed Speed ◽  
Ultrasonic Machining ◽  
Rotary Ultrasonic Machining ◽  
Cutting Depth ◽  
Influence Of Process Parameters

Experiments were carried out to study the effect of ultrasonic vibration on the surface roughness and subsurface damage (SSD) in rotary ultrasonic machining (RUM) of glass BK7. As a comparison, some conventional grinding (CG) experiments were also performed under the same process parameters with there of the RUM ones. The surface roughness of the RUM/CG samples was measured with a surface profilometer. The SSD of these specimens was assessed and characterized by a measuring microscope with the help of the taper polishing method. Also, the influence of process parameters (cutting depth, feed speed, and spindle speed) on the surface/subsurface quality was discussed. As a result, both the surface roughness and the SSD depth of the RUM/CG specimens were reduced with the increased spindle speed, while increased with the increasing of feed speed and cutting depth of the diamond tool. Compared with the CG process, the introduction of ultrasonic vibration resulted in the higher surface roughness and SSD depth, due to the fact that the max cutting depth of the abrasive in the RUM process increased by an amplitude compared with that in the CG process.

Incremental sheet metal forming of Ti–6Al–4V alloy for aerospace application

2020 ◽  
Vol 44 (1) ◽  
pp. 56-64 ◽  
Author(s):  
R. Mohanraj ◽  
S. Elangovan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Sheet Metal ◽  
Process Parameters ◽  
Experimental Work ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Geometric Accuracy ◽  
Element Analysis ◽  
Incremental Sheet Metal Forming

Driven by an increasing demand from the aerospace industry, thin sheet forming of titanium and its alloys is gaining prominence in scientific research. The design and manufacture of aerospace components requires the utmost precision and accuracy. It is essential to have good control over the process parameters of the forming process. Processes such as incremental sheet metal forming (ISMF) are highly controlled in the current manufacturing environment, but improvements in geometric accuracy and thinning are still needed. Although ISMF has greater process competence for manufacturing airframe structures with minimal costs, the process has its own negative effect on geometric accuracy due to elastic springback and sheet thinning. In this study, finite element analysis and experimental work are performed, considering process parameters such as spindle speed, feed rate, step depth, and tool diameter, to study the geometric accuracy and thinning of Ti–6Al–4V alloy sheet, while incrementally forming an aerospace component with asymmetrical geometry. The results are useful for understanding the geometric accuracy and thinning effects on parts manufactured by single point incremental forming (SPIF). Results from finite element analysis and experimental work are compared and found to be in good agreement.

STUDY ON FORMING FORCES OF PARTS PROCESSED BY SINGLE POINT INCREMENTAL FORMING WITH DUMMY SHEET

2019 ◽  
Vol 14 (3) ◽  
Author(s):  
Vikas Sisodia ◽  
Shailendra Kumar
Keyword(s):  
Process Parameters ◽  
Feed Rate ◽  
Incremental Forming ◽  
Single Point ◽  
Sheet Thickness ◽  
Single Point Incremental Forming ◽  
Forming Force ◽  
Step Size ◽  
Wall Angle ◽  
Influence Of Process Parameters

The present paper describes the experimental investigation on influence of process parameters on maximum forming force in Single Point Incremental Forming (SPIF) process using dummy sheet. Process parameters namely dummy sheet thickness, tool size, step size, wall angle and feed rate are selected. Taguchi L18 orthogonal array is used to design the experiments. From the analysis of variance (ANOVA) dummy sheet thickness, tool size, step size and wall angle are significant process parameters while feed rate is insignificant. It is found that as dummy sheet thickness, tool size, step size and wall angle increase magnitude of peak forming force increases while there is marginal decrease in forming force as feed rate increases. Predictive model is also developed for forming force. Validation tests are performed in order to check the accuracy of developed model. Optimum set of process parameters is also determined to minimize forming force. Experimental results are in good agreement with results predicted by the developed mathematical model.

Formability and Surface Finish Studies in Single Point Incremental Forming

2011 ◽  
Author(s):  
A. Bhattacharya ◽  
Samarjit Singh ◽  
K. Maneesh ◽  
N. Venkata Reddy ◽  
Jian Cao
Keyword(s):  
Surface Roughness ◽  
Sheet Metal ◽  
Surface Finish ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Incremental Forming ◽  
Experimental Results ◽  
Wall Angle ◽  
Incremental Sheet Metal Forming ◽  
Tool Diameter

Incremental sheet metal forming (ISMF) has demonstrated its great potential to form complex three-dimensional parts without using a component specific tooling. The die-less nature in incremental forming provides a competitive alternative for economically and effectively fabricating low-volume functional sheet parts. However, ISMF has limitations with respect to maximum formable wall angle, geometrical accuracy and surface finish of the component. In the present work, an experimental study is carried out to study the effect of incremental sheet metal forming process variables on maximum formable angle and surface finish. Box-Behnken method is used to design the experiments for formability study and full factorial method is used for surface finish study. Analysis of experimental results indicates that formability in incremental forming decreases with increase in tool diameter. Formable angle first increases and then decreases with incremental depth and it is also observed that the variation in the formable angle is not significant in the range of incremental depths considered to produce good surface finishes during the present study. A simple analysis model is used to estimate the stress values during incremental sheet metal forming assuming that the deformation occurs predominantly under plane strain condition. A stress based criterion is used along with the above mentioned analysis to predict the formability in ISMF and its predictions are in very good agreement with the experimental results. Surface roughness decreases with increase in tool diameter for all incremental depths. Surface roughness increases first with increase in incremental depth up to certain angle and then decreases. Surface roughness value decreases with increase in wall angle.

Sign in / Sign up

Export Citation Format

Share Document