scholarly journals Sound insulation design of the thin partitions on the base of concentrated parameters model

Vestnik MGSU ◽  
2020 ◽  
pp. 353-367
Author(s):  
Ivan P. Saltykov
Keyword(s):  
Construction Materials ◽  
Momentum Conservation ◽  
Mass Action ◽  
Sound Insulation ◽  
Detailed Calculation ◽  
Sound Waves ◽  
Normative Documents ◽  
Airborne Sound ◽  
Calculation Technique ◽  
Velocity Transmission

Introduction. The theoretical and practical approach on the base of the discrete parameter's method to the acoustic insulation of the thin partitions by Candidate of Science, Prof. Zakharov A.V. is given in this issue. The method allowed to develop a logically conclusive and consistent physical airborne sound insulation model for one-layered massive and light partitions either. This issue concentrates on providing of the engineer calculation technique of the sound insula-tion for the thin partitions and, also, on comparison of the technique's results with the computations by the current normative documents. Materials and methods. The application of the same “Mass Action Law's” formula both for the normal and the oblique noise wave's incidence on the sound isolating plate, regardless the sound waves angles, is mathematically and physically approved. The essence of the concentrated parameters, such as concentrated and reduced material's mass, is revealed. The equations of momentum conservation law and kinetic energy conservation are used to obtain the coefficient of the oscillation velocity transmission. The formulas for airborne sound insulation at the diapasons before and after the sound wave's coincidence frequency are written. Results. The damping air property's influence on the thin partition's sound insulation is considered, and it's formulas are represented. The formulas for taking into account the reduction of sound insulation at the resonances in sound protective slab or in a partition are also given. The general equation for the thin partition's sound insulation by the method of localized (discrete) parameters are derived. The example of detailed calculation of the sound isolation of the thin asbestos-cement partition is demonstrated. The comparison between the medial three octave deviations of the sound isolation values and the experimental results in case of the SP (Russian normative document) method and in case of the introduced author's method for the different construction materials is represented. Conclusions. The proposedsound insulation calculation method for the thin light partitions, which is based on the concentrated parameters model, gives very close to experiments results. So, it enables to find the insulation figures across the entire standard frequency range, according to the initial physical and technical materials' and constructions' features.

scholarly journals Method for calculating the insulation of airborne sound by enclose from volumetric-block buildings

2021 ◽  
Vol 264 ◽  
pp. 02057
Author(s):  
Rakhmatulla Pirmatov ◽  
Jasur Rashidov ◽  
Khabibullo Pirmatov
Keyword(s):  
Human Health ◽  
Sleep Disturbances ◽  
Small Mass ◽  
Technical Condition ◽  
Design Stage ◽  
Design Solution ◽  
Sound Insulation ◽  
Sound Waves ◽  
Regulatory Requirements ◽  
Airborne Sound

This research paper provides a method for calculating airborne sound insulation by encloses from volumetric-block buildings. The choice of the most suitable construction solution for the technical condition of objects at the design stage for building elements should primarily provide insulation from sound and a safe mode inside buildings, in which protection conditions in the combination of energy efficiency and stability should be taken into account, as well as competent decisions and its impact on the construction process buildings. Numerous scientific studies show the negative effect of sound on human health by the occurrence of various diseases such as cognitive impairment of the fetus in reproductive people, sleep disturbances, tinnitus, irritation, and dysfunction of some human organs. Therefore, sound exposure should be considered a source of inconvenience and a source of harm to human health. Sound waves collide with the surfaces of enclosing structures, causing them to vibrate and transmit the negative effects of the air around them in adjoining rooms, in which, from the point of view of regulatory requirements, in many cases, it does not meet the requirements, since comfort also depends on the design and sound insulation of the volumetric-block buildings. Many of these problems are easily solved at the design stage by choosing the right design solution and calculating the soundproofing qualities of the enclosing structures. In particular, one of the main tasks at the design stage is the development of structural solutions for internal enclosing structures that have a relatively small mass that allows reducing the load on the supporting structures of the building and plummets the material consumption of construction. At the same time, it is necessary to ensure compliance with the regulatory requirements for the isolation of airborne sound of enclosing structures.

scholarly journals Assessment of the airborne sound insulation from mobility vibration measurements; a hybrid experimental numerical approach

2018 ◽  
Vol 432 ◽  
pp. 680-698 ◽  
Author(s):  
N.B. Roozen ◽  
Q. Leclère ◽  
D. Urbán ◽  
T. Méndez Echenagucia ◽  
P. Block ◽  
...  
Keyword(s):  
Numerical Approach ◽  
Sound Insulation ◽  
Vibration Measurements ◽  
Airborne Sound

scholarly journals Non-Wovens as Sound Reducers

2018 ◽  
Vol 55 (2) ◽  
pp. 64-76
Author(s):  
D. Belakova ◽  
A. Seile ◽  
S. Kukle ◽  
T. Plamus
Keyword(s):  
Absorption Coefficient ◽  
Surface Density ◽  
Sound Absorption ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Sound Insulation ◽  
Material Structure ◽  
Sound Transmission Loss ◽  
Sound Waves ◽  
Frequency Range

Abstract Within the present study, the effect of hemp (40 wt%) and polyactide (60 wt%), non-woven surface density, thickness and number of fibre web layers on the sound absorption coefficient and the sound transmission loss in the frequency range from 50 to 5000 Hz is analysed. The sound insulation properties of the experimental samples have been determined, compared to the ones in practical use, and the possible use of material has been defined. Non-woven materials are ideally suited for use in acoustic insulation products because the arrangement of fibres produces a porous material structure, which leads to a greater interaction between sound waves and fibre structure. Of all the tested samples (A, B and D), the non-woven variant B exceeded the surface density of sample A by 1.22 times and 1.15 times that of sample D. By placing non-wovens one above the other in 2 layers, it is possible to increase the absorption coefficient of the material, which depending on the frequency corresponds to C, D, and E sound absorption classes. Sample A demonstrates the best sound absorption of all the three samples in the frequency range from 250 to 2000 Hz. In the test frequency range from 50 to 5000 Hz, the sound transmission loss varies from 0.76 (Sample D at 63 Hz) to 3.90 (Sample B at 5000 Hz).

scholarly journals Методы определения характеристик звукопоглощения строительных материалов и звукоизоляции конструкций (обзор)

2020 ◽  
Vol 45 (4) ◽  
Author(s):  
Keyword(s):  
Noise Reduction ◽  
Sound Absorption ◽  
Building Materials ◽  
Developed Countries ◽  
Reduction Factor ◽  
Sound Insulation ◽  
Reverberation Chamber ◽  
Normative Documents ◽  
Urban Conditions ◽  
First Time

Исследование акустических характеристик строительных материалов и конструкций необходимо для комфортной жизни людей в городских условиях. Несмотря на то что в нормативных документах развитых государств есть ряд методов их определения, единого понимания самих характеристик и путей их адекватного определения до сих пор нет. В настоящей работе мы попытались систематизировать и дать критический обзор нормативных документов, содержащих методы определения звукопоглощающих свойств материалов и звукоизоляционных характеристик конструкций. Впервые выявлены присущие разным методам закономерности определения характеристик звукопоглощения и звукоизоляции. Определены наиболее характерные показатели звукопоглощения. Произведено ранжирование по коэффициенту уменьшения шума NRC наиболее часто применяемых строительных материалов. Названы области применения рассматриваемых методик, проанализированы их преимущества и ограничения. Ключевые слова: коэффициент уменьшения шума, звукопоглотитель, импедансная труба, реверберационная камера The study of the acoustic characteristics of building materials and structures is necessary for provision of comfortable life of people in urban conditions. Despite the fact that in the normative documents of developed countries there are a number of methods for their determination, there is still no common understanding of the characteristics themselves and the ways of their adequate determination. In this work we tried to systematize and give a critical review of regulatory documents containing the methods for determining the sound-absorbing properties of materials and the sound-insulating characteristics of structures. For the first time the regularities in determination the characteristics of sound absorption and sound insulation inherent in different methods have been revealed. The most characteristic indicators of sound absorption have been determined. The ranking of the most commonly used building materials was made according to the noise reduction factor (NRC). The areas of application of the considered methods are presented, their advantages and limitations are analyzed. Keywords: noise reduction factor, sound absorber, impedance tube, reverberation chamber

Empirical study on the correlation between measurement methods under diffuse and direct sound field conditions for determining sound absorption and airborne sound insulation properties of noise barriers

2021 ◽  
Vol 263 (3) ◽  
pp. 3350-3361
Author(s):  
Andreas Fuchs ◽  
Reinhard Wehr ◽  
Marco Conter
Keyword(s):  
Empirical Study ◽  
Sound Absorption ◽  
Sound Field ◽  
Research Programme ◽  
Measurement Methods ◽  
Field Conditions ◽  
Acoustic Properties ◽  
Sound Insulation ◽  
Noise Barriers ◽  
Airborne Sound

In the frame of the SOPRANOISE project (funded by CEDR in the Transnational Road Research Programme 2018) the database of the European noise barrier market developed during the QUIESST project was updated with newly acquired data. This database gives the opportunity for an empirical study on the correlation between the different measurement methods for the acoustic properties of noise barriers (according to the EN 1793 series) to further investigate the interrelationships between these methods by using single-number ratings and third-octave band data. First a correlation of the measurement methods for sound absorption under diffuse field conditions (EN 1793-1) and sound reflection under direct sound field conditions (EN 1793-5) is presented. Secondly, a correlation of the measurement methods for airborne sound insulation under diffuse field conditions (EN 1793-2) and airborne sound insulation under direct sound field conditions (EN 1793-6) is shown. While for airborne sound insulation a distinct correlation is found due to the wide data range, for sound absorption no robust correlation can be found.

Sign in / Sign up

Export Citation Format

Share Document