scholarly journals An experimental study of a shear connection of steel-reinforced concrete slabs with angle shear studs

Vestnik MGSU ◽  
2021 ◽  
pp. 144-152
Author(s):  
Gennadij P. Tonkih ◽  
Denis A. Chesnokov
Keyword(s):  
Reinforced Concrete ◽  
Experimental Research ◽  
Laboratory Tests ◽  
Testing Machine ◽  
Design Parameters ◽  
Concrete Slabs ◽  
Steel Reinforced Concrete ◽  
Shear Connection ◽  
Reinforced Concrete Slabs ◽  
Steel Deck

Introduction. Angle shear studs, attachable by powder-actuated fasteners, are used as an alternative to traditional welded elements ensuring the shear connection of steel-reinforced concrete slabs. The objective is to revise their strength characteristics for different options of steel-reinforced concrete slab designs pursuant to SP 266.1325800.2016. Materials and methods. The programme of laboratory tests was developed in compliance with GOST R 58336-2018 to identify the strength behaviour of angle shear studs. Static shear testing of angle studs was performed at the LISMIiK laboratory of the Moscow State University of Civil Engineering using universal servo-hydraulic reconfigurable testing machine MTS.Multiaxial.DS1.4811.DS1.50019, designated for the testing of static and dynamic loads applied to large constructions. Displacements were measured by a tripod-mounted piston-type indicator. Results. The programme of theoretical and experimental research into the behaviour of a shear connection with angle shear studs in steel-reinforced concrete slabs that also had steel deck profile sheets was developed on the basis of the analysis of regulatory documents and sources of research information. Laboratory tests showed that the strength of the shear connection in an angle stud depends not only on the geometry of the steel deck, used as the stay-in-place formwork, but also on the position of a shear stud in the deck. Conclusions. The results of the theoretical and experimental research can be used to obtain new information about the strength and deformability of angle shear studs, connected by powder-actuated fasteners with the help of high strength expansion anchors; they allow to revise the currently used provisions governing the calculation of the reduction factor pursuant to SP 266.1325800.2016 with account taken of the design parameters of a shear connection.

scholarly journals Investigation on Structural Behavior of Bamboo Reinforced Concrete Slabs under Concentrated Load

2021 ◽  
Vol 50 (1) ◽  
pp. 227-238
Author(s):  
Yanuar Haryanto ◽  
Nanang Gunawan Wariyatno ◽  
Hsuan-Teh Hu ◽  
Ay Lie Han ◽  
Banu Ardi Hidayat
Keyword(s):  
Reinforced Concrete ◽  
Concrete Slab ◽  
Absorption Capacity ◽  
Concrete Slabs ◽  
Structural Behaviour ◽  
Reinforced Concrete Slab ◽  
Concentrated Load ◽  
Steel Reinforced Concrete ◽  
Reinforced Concrete Slabs ◽  
Cracking Pattern

Reinforced concrete is perhaps the most widely used building material in the world. However, the materials used for reinforcement of concrete i.e. steel is quite expensive and scarcely available in the developing world. As a result, bamboo is considered to be a cheaper replacement with high tensile strength. This research investigated the structural behaviour of bamboo-reinforced concrete slabs used for footplate foundation subjected to concentrated load. For this purpose, four different reinforced concrete slab panels were developed and analyzed. The influence of replacing steel with bamboo for the reinforcement of concrete slabs on their structural behaviour was assessed by determining the load-deflection characteristics, the ultimate load, the stiffness, the ductility, the cracking pattern, and the energy absorption capacity. The results showed that in comparison to steel reinforced concrete slabs, the strength of 82% can be acquired by the bamboo reinforced slabs. Furthermore, ductility demonstrated by the two types of specimens was almost equivalent i.e. up to 93%. Those indicated that the structural behaviour demonstrated by bamboo reinforced slabs is quite comparable to that of steel reinforced concrete slabs. Therefore, bamboo can prove to be a promising substitute for steel in concrete reinforcement. Future studies may further examine this opportunity.

Numerical Analysis of the Influence of the Parameter of Ductility of Reinforcing Steel on the Behaviour of Narrow Three-Span Reinforced Concrete Slabs from the Point of View of Experimental Investigations

2015 ◽  
Vol 769 ◽  
pp. 133-138
Author(s):  
Mirosław Wieczorek
Keyword(s):  
Reinforced Concrete ◽  
Numerical Analysis ◽  
Laboratory Tests ◽  
Numerical Models ◽  
Material Model ◽  
Point Of View ◽  
Experimental Investigations ◽  
Concrete Slabs ◽  
Building Structures ◽  
Reinforced Concrete Slabs

In the time of exploitation of building structures frequently situations do occur, in which due to failures they are exposed to much higher loads than originally predicted. The subject matter of the performed investigations and a numerical analysis are models of four narrow reinforced concrete slabs with the dimensions 7140×500×190 mm. The paper presents the results of the numerical analysis, the aim of which was to reflect and to provide detailed information about phenomena occurring in the course of laboratory tests. Numerical models were constructed according to the system ANSYS, applying volumetric elements SOLID65 and bars LINK8. In order to determine the relation σ-ε of steel an isotropic model of strengthening in the system ANSYS was used, constructed by Misses. The behaviour of concrete was represented by the material model Concrete. The parameters applied in the material models had been obtained in laboratory tests of the material. The paper quotes the results of calculations compared with the results obtained in laboratory tests.

scholarly journals Experimental research of punching shear mechanism of reinforcing concrete slab

2019 ◽  
Vol 97 ◽  
pp. 04032
Author(s):  
Nikolay Trekin ◽  
Dmitrii Pekin
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Experimental Research ◽  
Strain State ◽  
Concrete Slab ◽  
Punching Shear ◽  
Concrete Slabs ◽  
Stress Strain ◽  
Stress Strain State ◽  
Reinforced Concrete Slabs

The analysis of various regulatory methods for calculating reinforced concrete slabs for pushing and comparing with experiment results is made. The tested sample, measuring equipment and test bench are described. Sizes and materials for experimental prototype were chosen by existing beamless and capless slabs of monolithic reinforced concrete superstructures with column grid from 8×8 to 9×9 m. Experimental research results of reinforcing concrete plate structure are presented for study purpose of stress-strain state when punching shear collapse occurring. Various aspects and observations obtained during the test are given. The comparison of the tested slab fragment with the complete response of slab structure is performed. Analysis of tested sample stress-strain state and punching bearing capacity calculations results in according to existing regular standards were made. Main criterias of punching shear collapse were determined and new procedure for punching calculation of RC concrete slabs was offered basing on significantly new approach in punching bearing capacity defining.

scholarly journals Determination of features of composite steel and concrete slab behavior under fire condition

2021 ◽  
Vol 6 (7 (114)) ◽  
Author(s):  
Valeriia Nekora ◽  
Stanislav Sidnei ◽  
Taras Shnal ◽  
Olga Nekora ◽  
Iryna Dankevych ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Temperature Distribution ◽  
Fire Resistance ◽  
Temperature Regime ◽  
Strain State ◽  
Concrete Slabs ◽  
Standard Temperature ◽  
Steel Reinforced Concrete ◽  
Steel Sheets ◽  
Reinforced Concrete Slabs

Methods for calculating the fire resistance of steel-reinforced concrete slabs made using profiled steel sheets under the influence of a standard temperature regime for more than 120 minutes are considered and analyzed. Research has been carried out to determine the heating parameters and the stress-strain state of steel-reinforced concrete slabs made using profiled steel sheets under fire conditions for more than 120 minutes. The results of this study allow to obtain indicators of temperature distribution for assessing the fire resistance of such structures for fire resistance classes above REI 120. Accordingly, the results obtained are a scientific basis for improving the existing method for calculating the fire resistance of steel-reinforced concrete slabs made using profiled steel sheets. The temperature distribution in the cross-section of structures was obtained using a general theoretical approach to solving the problem of heat conduction using the finite element method. Using the obtained temperature distributions, the parameters of the stress-strain state were determined based on the method of limiting states. To carry out the calculations, appropriate mathematical models were created that describe the effect of the standard temperature regime of a fire, to determine the temperature distribution at every minute in the sections of steel-reinforced concrete slabs with profiled steel sheets. A method is proposed for dividing the section into zones to take into account the decrease in the indicators of the mechanical properties of concrete and steel. A simplified method for the design assessment of steel-reinforced concrete slabs made using profiled steel sheets is proposed, which is consistent with the current EU standards and can be effectively used to analyze their fire resistance when establishing their compliance with the fire resistance class REI 120 and higher.

Sign in / Sign up

Export Citation Format

Share Document