scholarly journals Stability Indicating HPLC Method for the Determination of Delamanid in Pharmaceutical Dosage Form

2021 ◽  
Vol 11 (1-s) ◽  
pp. 108-112
Author(s):  
Advaita B. Patel ◽  
Deepa R. Patel ◽  
Dhaval M. Patel ◽  
Mansi Babaria
Keyword(s):  
Analytical Method ◽  
Mobile Phase ◽  
Dosage Form ◽  
Degradation Products ◽  
Stress Test ◽  
Reversed Phase ◽  
Hplc Method ◽  
Pharmaceutical Dosage Form ◽  
Stability Indicating

Delamanid is successfully used for treatment of MDR TB. A stability indicating analytical method has been developed and validated. In this study Delamanid was degraded under different stress test conditions as per International Conference on Harmonization. The degraded samples were used to develop a stability-indicating high performance liquid chromatographic (HPLC) method for the Delamanid. The Delamanid was well separated from degradation products using a reversed-phase Hypersil BDS C18 (250 mm × 4.6mm i.d., 5µm) column and a mobile phase comprising of 0.01M pH 2.70 Phosphate Buffer: Acetonitrile (pH 3.50) 70:30, pH of mobile phase was adjusted with Glacial acetic acid and other HPLC parameters were flow rate 1 mL/min, detection wavelength 254 nm and injection volume 10 µl. The method was validated for linearity, precision, accuracy, ruggedness and robustness. Results obtained after validation study indicating that the proposed single method allowed analysis of Delamanid in the presence of their degradation products formed under a variety of stress conditions. The developed procedure was also applicable to the determination of stability of the Delamanid in commercial pharmaceutical dosage form. Keywords:  Delamanid, stability indicating analytical method, HPLC

Development and Validation of Two Robust Stability-Indicating Chromatographic Methods for Determination of Metolazone in Drug Substance and Pharmaceutical Dosage Form in the Presence of Its Degradation Products and Characterization of Main Degradation Products Based on LC-MS

2019 ◽  
Vol 58 (3) ◽  
pp. 251-261
Author(s):  
Hala E Zaazaa ◽  
Rasha Abdel-Ghany ◽  
M Abdelkawy ◽  
Mahmoud Sayed
Keyword(s):  
Dosage Form ◽  
Degradation Products ◽  
Hplc Method ◽  
Drug Substance ◽  
Design Parameters ◽  
Pharmaceutical Dosage Form ◽  
Stability Indicating ◽  
Chromatographic Methods ◽  
Hptlc Method

Abstract Two robust and selective stability-indicating chromatographic methods were developed and validated for the determination of metolazone in drug substance and pharmaceutical dosage form in the presence of its degradation products. The HPLC method employed a Kromasil C18 (250 × 4.6,5 μm) column and a mobile phase of acetonitrile: 0.2% orthophosphoric acid (32:68 v/v) at a flow rate 2 mL/min and detection at 238 nm. The separation was performed in HPLC isocratic mode. The robustness of the suggested method was assessed using the Plackett–Burman design, parameters affecting system suitability were established and non-significant intervals for the significant parameters were considered. The HPTLC method employed Nano-SIL-20 UV254 HPTLC plates as adsorbent, ethyl acetate: toluene: acetic acid solution (4:4:0.5, v/v/v), as a developing solvent system and densitometric detection at 238 nm. Metolazone was exposed to different stress conditions, including acid and alkaline hydrolysis and oxidative and photolytic degradation. The main degradation products obtained have been characterized and interpreted based on LC-MS. The linearity of the suggested methods was proved in the concentration range of 20–75 μg/mL for the HPLC method and 100–900 ng/spot for the HPTLC method. The suggested methods were validated according to international conference on harmonization guidelines. These methods were successfully dedicated for the estimation of metolazone in drug substance and pharmaceutical dosage form in the presence of its degradation products. The results of the suggested methods were evaluated and compared statistically with results obtained by an official method without finding any significant difference.

scholarly journals Stability-indicating HPLC determination of ciprofibrate in bulk drug and pharmaceutical dosage form

2012 ◽  
Vol 18 (1) ◽  
pp. 95-101 ◽  
Author(s):  
P.S. Jain ◽  
H.N. Jivani ◽  
R.N. Khatal ◽  
S.J. Surana
Keyword(s):  
Dosage Form ◽  
Degradation Products ◽  
Reversed Phase ◽  
Stress Conditions ◽  
Assay Method ◽  
Main Peak ◽  
Forced Degradation ◽  
Pharmaceutical Dosage Form ◽  
Stability Indicating

A novel stability-indicating high-performance liquid chromatographic assay method was developed and validated for quantitative determination of ciprofibrate in bulk drugs and in pharmaceutical dosage form in the presence of degradation products. An isocratic, reversed phase HPLC method was developed to separate the drug from the degradation products, using an Ace5-C18 (250?4.6 mm, 5 ?m) advance chromatography column, and methanol and water (90:10 v/v) as a mobile phase. The detection was carried out at a wavelength of 232 nm. The ciprofibrate was subjected to stress conditions of hydrolysis (acid, base), oxidation, photolysis and thermal degradation. Degradation was observed for ciprofibrate in base, in acid and in 30% H2O2. The drug was found to be stable in the other stress conditions attempted. The degradation products were well resolved from the main peak. The percentage recovery of ciprofibrate was from (98.65 to 100.01%) in the pharmaceutical dosage form. The developed method was validated with respect to linearity, accuracy (recovery), precision, system suitability, specificity and robustness. The forced degradation studies prove the stability indicating power of the method.

A Validated Stability-Indicating RP-LC Method for the Simultaneous Determination of Amlodipine and Perindopril in Tablet Dosage Form and Their Stress Degradation Behavior Under ICH-Recommended Stress Conditions

2013 ◽  
Vol 96 (4) ◽  
pp. 751-757 ◽  
Author(s):  
Mehmet Gumustas ◽  
Sibel A Ozkan
Keyword(s):  
Simultaneous Determination ◽  
Mobile Phase ◽  
Dosage Form ◽  
Degradation Products ◽  
Stress Conditions ◽  
Assay Method ◽  
Pharmaceutical Dosage Form ◽  
Stability Indicating ◽  
Tablet Dosage

Abstract A stability-indicating RP-LC assay method was developed for the simultaneous determination of the cardiovascular drugs amlodipine and perindopril in the presence of degradation products generated from forced decomposition studies. The developed method is applicable for the determination of related substances in bulk drugs and simultaneous assay in a tablet pharmaceutical dosage form. Separation of the drugs and their degradation products was obtained using an RP Waters Spherisorb ODS1 column (250 × 4.6 mm id, 5 μm particle size) with the mobile phase acetonitrile–water (30 + 70, v/v) containing 15 mM phosphoric acid. The pH of the mobile phase was adjusted to 5.0. A flow rate of 1.2 mL/min was used for the separations, with detection at 215 nm. The chromatographic separation was performed at a column temperature of 45°C. Atenolol was chosen as the internal standard. Amlodipine and perindopril were exposed to thermal, photolytic, hydrolytic, and oxidative stress conditions, and the stressed samples were analyzed by the proposed method. Degradation studies showed that both compounds were degraded under these stress conditions. The method was found to be stability-indicating and can be used for the routine analysis of amlodipine and perindopril in the studied combined tablet dosage form.

NEW VALIDATED RP-HPLC METHOD FOR THE DETERMINATION OF RIZATRIPTAN BENZOATE IN BULK AND PHARMACEUTICAL DOSAGE FORM

INDIAN DRUGS ◽  
2014 ◽  
Vol 51 (12) ◽  
pp. 32-36
Author(s):  
T. Vishalakhi ◽  
◽  
S. K Kumar ◽  
K Sujana ◽  
P Rani
Keyword(s):  
Mobile Phase ◽  
Dosage Form ◽  
Hplc Method ◽  
Detector Response ◽  
Mobile Phase Flow Rate ◽  
Pharmaceutical Dosage Form ◽  
Rizatriptan Benzoate ◽  
Rp Hplc ◽  
Bulk Drug

A simple validated RP HPLC method for the estimation of rizatriptan benzoate in pharmaceutical dosage form and bulk was developed for routine analysis. This method was developed by selecting Agilent TC C18 (250 x 4.6 mm, 5 μ) column as stationary phase and acrylonibrile:water (45:55), pH adjusted to 3, as mobile phase. Flow rate of mobile phase was maintained at 4: 1 mL/min at ambient temperature throughout the experiment. Quantification was achieved with ultraviolet (DAD) detection at 220 nm. The retention time obtained for rizatriptan was 2.8 min. The detector response was linear in the concentration range of 2-25μg/mL. This method was validated and shown to be specific, sensitive, precise, linear, accurate, rugged and robust. Hence, this method can be applied for routine quality control of rizatriptan benzoate in dosage forms as well as in bulk drug.

VALIDATED RP-HPLC METHOD FOR DETERMINATION OF ENZALUTAMIDE IN BULK DRUG AND PHARMACEUTICAL DOSAGE FORM

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (11) ◽  
pp. 46-50
Author(s):  
Z. G Khan ◽  
◽  
S. S. Patil ◽  
P. K. Deshmukh ◽  
P. O. Patil
Keyword(s):  
Retention Time ◽  
Mobile Phase ◽  
High Performance ◽  
Reversed Phase ◽  
Hplc Method ◽  
Uv Detector ◽  
Chromatography Method ◽  
Pharmaceutical Dosage Form ◽  
Bulk Drug

Novel, isocratic reversed phase high performance liquid chromatography method was developed and validated for the determination of enzalutamide (EZA) in bulk drug and pharmaceutical formulation. Efficient separation was achieved on PrincetonSPHER C18 100A, 5μ (250×4.6 mm) under the isocratic mode of elution using acetonitrile: water (80:20) % V/V as a mobile phase pumped in to the column at flow rate 1.0 mL/min. The effluent was monitored at 237.0 nm using UV detector. EZA was eluted in the given mobile phase at retention time (tR) of 3.2 minutes. The standard calibration curve was linear over the concentration range 10 - 60 μg/mL with correlation coefficient 0.997. The method was validated for accuracy, precision, sensitivity, robustness, ruggedness and all the resulting data treated statistically. The system suitability parameters like retention time, theoretical plates, tailing factor, capacity factor were found within the limit.

scholarly journals Stability-Indicating Validated HPLC Method for Simultaneous Determination of Oral Antidiabetic Drugs from Thiazolidinedione and Sulfonylurea Groups in Combined Dosage Forms

2010 ◽  
Vol 93 (4) ◽  
pp. 1086-1092 ◽  
Author(s):  
Anna Gumieniczek ◽  
Anna Berecka ◽  
ukasz Komsta
Keyword(s):  
Simultaneous Determination ◽  
Mobile Phase ◽  
Uv Light ◽  
Degradation Products ◽  
Dosage Forms ◽  
Hplc Method ◽  
Base Temperature ◽  
Stability Indicating ◽  
Acid And Base

Abstract For type 2 diabetes treatment, combinations of drugs from the thiazolidinedione and sulfonylurea groups are now available in the same tablet or capsule. Therefore, a stability-indicating and validated HPLC method was developed for simultaneous determination of pioglitazone, rosiglitazone, and glipizide in combined dosage forms. The examined drugs were subjected to different conditions such as acid and base, temperature, and UV light, and degradation of pioglitazone and glipizide was observed under thermal and acidic stress. However, selectivity of the presented method for pioglitazone, rosiglitazone, and glipizide assay against their degradation products was confirmed. It was also demonstrated to be robust, resisting small deliberate changes in pH of the buffer, flow rate, and percentage of acetonitrile in the mobile phase. The presented method utilizes a LiChrospher RP18 column (125 4.0 mm), acetonitrile in phosphate buffer at pH 4.3 (40 + 60, v/v) as the mobile phase, and UV detection at 225 nm for pioglitazone/glipizide or 245 nm for rosiglitazone/glipizide. The method was validated with respect to linearity, precision, and accuracy. Finally, the elaborated procedure was applied for the QC of pioglitazone/glipizide and rosiglitazone/glipizide mixtures.

Development, Optimization, and Validation of a Green and Stability-Indicating HPLC Method for Determination of Daptomycin in Lyophilized Powder

2015 ◽  
Vol 98 (5) ◽  
pp. 1276-1285 ◽  
Author(s):  
Eliane Gandolpho Tótoli ◽  
Hérida Regina Nunes Salgado
Keyword(s):  
Mobile Phase ◽  
Hplc Method ◽  
Pharmaceutical Dosage Form ◽  
Stability Indicating ◽  
Gram Positive Bacteria ◽  
Stress Degradation ◽  
Resistant Strains ◽  
Vancomycin Resistant ◽  
Toxic Organic Solvents

Abstract Daptomycin is an antimicrobial that plays an important role in clinical practice today because it is considered a promising drug to combat resistant strains, such as methicilin and vancomycin-resistant Gram-positive bacteria. Considering the analysis of daptomycin in a pharmaceutical dosage form, the only method found in literature uses potentially toxic organic solvents. Therefore, the objective of this work was to develop a green and stability-indicating HPLC method for determination of daptomycin in lyophilized powder. The mobile phase was ethanol–water (55 + 45, v/v) at pH 4.5 pumped at a flow rate of 0.6 mL/min. A C18 column was used, and UV detection was performed at 221 nm. Stress degradation studies were conducted in order to demonstrate the specificity and stability-indicating capability of the method. The method was validated according to International Conference on Harmonization guidelines, proving to be linear (r = 0.9996), precise, accurate, robust (demonstrated by the Plackett-Burman model), and specific within the range 20–70 μg/mL. The retention time of daptomycin was 5.8 min. It can be concluded that the validated method can be a fast, safe, and environmentally friendly alternative for the analysis of daptomycin.

Sign in / Sign up

Export Citation Format

Share Document