scholarly journals Changes in soft tissue profile using functional appliances in the treatment of skeletal class II malocclusion

2015 ◽  
Vol 143 (1-2) ◽  
pp. 12-15 ◽  
Author(s):  
Zorana Stamenkovic ◽  
Vanja Raickovic ◽  
Vladimir Ristic
Keyword(s):  
Soft Tissue ◽  
Class Ii ◽  
Orthodontic Appliances ◽  
Class Ii Malocclusion ◽  
Type I ◽  
Upper Lip ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Facial Esthetics ◽  
Soft Tissue Profile

Introduction. The effects of orthodontic treatment are considered to be successful if the facial harmony is achieved, while the structures of soft tissue profile are in harmony with skeletal structures of neurocranium and viscerocranium. In patients with skeletal distal bite caused by mandibular retrognathism, facial esthetics is disturbed often, in terms of pronounced convexity of the profile and change in the position and relationship of the lips. Objective. The aim of this study was to determine the extent of soft tissue profile changes in patients with skeletal Class II malocclusion treated with three different orthodontic appliances: Fr?nkel functional regulator type I (FR-I), Balters? Bionator type I and Hotz appliance. Methods. The study included 60 patients diagnosed with skeletal Class II malocclusion caused by mandibular retrognathism, in the period of early mixed dentition. Each subgroup of 20 patients was treated with a variety of orthodontic appliances. On the lateral cephalogram, before and after treatment, the following parameters were analyzed: T angle, H angle, the height of the upper lip, the position of the upper and lower lip in relation to the esthetic line. Within the statistical analysis the mean, maximum, minimum, standard deviation, coefficient of variation, two-factor analysis of variance with repeated measures and the factor analysis of variance were calculated using ANOVA, Bonferroni test and Student?s t-test. Results. A significant decrease of angles T and H was noticed in the application of FR-I, from 21.60? to 17.15?, and from 16.45? to 13.40? (p<0.001). FR-I decreased the height of the upper lip from 26.15 mm to 25.85 mm, while Hotz appliance and Balters? Bionator type I increased the height of the upper lip, thereby deteriorating esthetics of the patient. Conclusion. All used orthodontic appliances lead to changes in soft tissue profile in terms of improving facial esthetics, with the most distinctive changes in the application of Fr?nkel?s functional regulator type I, which is the most successful appliance for achieving the overall facial harmony of the patient.

scholarly journals The Effects of Functional Appliances on Female Patients with Skeletal Class II Malocclusion 6 Months after Menarche

2016 ◽  
Vol 17 (4) ◽  
pp. 286-293
Author(s):  
Ali AM Jouybari ◽  
Valiallah Arash ◽  
Saeid Tavanafar ◽  
Soraya Khafri ◽  
Zahra Dehghan
Keyword(s):  
Soft Tissue ◽  
Class Ii ◽  
Growth Spurt ◽  
Class Ii Malocclusion ◽  
Skeletal Class ◽  
Female Patients ◽  
Skeletal Class Ii ◽  
Soft Tissue Profile ◽  
Functional Appliances ◽  
The Mean

ABSTRACT Aim To investigate the skeletal, dental, and soft tissue changes in girls with class II division 1 malocclusion after growth spurt peak under the effect of activator appliance. Materials and methods In this clinical trial study, 15 female patients, with skeletal class II and mandibular growth deficiency and at least 5 mm overjet, were randomly selected 6 months after their menarche. The mean of their ages at the beginning was 12.33 ± 0.81 years, and in the end it was 13.73 ± 0.79 years; the mean duration of treatment was 12.2 ± 3.18 months. Lateral, cephalometric radiographs were taken from all the patients before and after the treatment. Data were analyzed with Statistical Package for the Social Sciences (SPSS) 20 using paired t-test. Results On an average, the ANB angle, the angle of the upper incisors with the S-N, facial convexity, and overjet decreased by 2.6° ± 0.9, 5.4° ± 0.8, 3.8° ± 3.4, and 5.6 ± 1.8 mm respectively. The SNB angle, the angle of the lower incisors with the N-B, the labiomental angle, the total length of the mandible, the lower anterior facial height, the lower lip distance, the first molar of the mandible, and the soft tissue pogonion to the vertical line from the S point increased by 2.8° ± 1.8, 3.4° ± 3, 14.7 ± 15, 3.7 ± 2.6, 2.1 ± 1.6, 6.3 ± 2.5, 4.4 ± 2.4, and 6 ± 3.3 mm respectively. All these figures were statistically significant (p = 0.000). Conclusion The functional appliance improved the dental–skeletal relations and the soft tissue profile of patients after growth spurt peak of puberty in a group of Iranian girls, whereas dental changes were more than skeletal ones. Clinical significance Functional appliances can be used for correction of skeletal class II malocclusion 6 months after menarche in girls. How to cite this article Jouybari AAM, Arash V, Tavanafar S, Khafri S, Dehghan Z. The Effects of Functional Appliances on Female Patients with Skeletal Class II Malocclusion 6 Months after Menarche. J Contemp Dent Pract 2016;17(4):286-293.

scholarly journals The Importance of the Occlusal Plane in Predicting Better Facial Soft Tissue in Class II Malocclusion in Ethnic Javanese

2020 ◽  
Vol 14 (03) ◽  
pp. 429-434
Author(s):  
I. Gusti Aju Wahju Ardani ◽  
Floretta Charlene Dinata ◽  
Ari Triwardhani
Keyword(s):  
Soft Tissue ◽  
Vertical Plane ◽  
Third Molar ◽  
Class Ii ◽  
Permanent Teeth ◽  
Occlusal Plane ◽  
Class Ii Malocclusion ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Soft Tissue Profile

Abstract Objectives Class II malocclusion is largely due to a retrognathic mandible. Mandibular rotation is closely related to changes in the occlusal plane during growth. The problems in the occlusal plane could cause disadvantages in the soft tissue profile in Class II malocclusion, presenting treatment challenges for an orthodontist. This study aimed to investigate the importance of the occlusal plane for a better soft tissue profile in Class II malocclusion for Javanese patients. Materials and Methods The total number of cephalogram softcopies of patients with skeletal Class II malocclusion were selected based on ANB values (> 4 degrees), no agenesis teeth except the third molar, and all permanent teeth. The cephalograms were calculated using digital tracing by Morpheus 3D imaging. The points and areas to be analyzed on the cephalogram were predetermined. The examination was performed in a span of 1 month and performed via a statistical test using Pearson’s test and multiple regression analysis (p < 0.05). Results There were significant correlation values between the angles produced by the occlusal plane to sella national, Frankfurt horizontal, mandibular plane, and Z-angle (p < 0.05). Conclusion Patients with skeletal Class II malocclusion have a significant correlation between the occlusal plane and the vertical plane, thereby affecting the shape of the soft tissue profile, which causes a facial imbalance. By improving mandibular movement, the soft tissue profile can also be corrected.

scholarly journals A combined Surgical-Orthodontic treatment in skeletal Class II malocclusion patients

2021 ◽  
Vol 3 (2) ◽  
pp. 82-87
Author(s):  
Prathyaksha Shetty ◽  
Dipjyothi Baruah ◽  
Amit Rekhawat ◽  
Karthik Cariappa ◽  
Sujala Ganapati Durgekar ◽  
...  
Keyword(s):  
Orthodontic Treatment ◽  
Class Ii ◽  
Mandibular Advancement ◽  
Class Ii Malocclusion ◽  
Skeletal Class ◽  
Sagittal Split Osteotomy ◽  
Skeletal Class Ii ◽  
Facial Esthetics ◽  
Bilateral Sagittal Split Osteotomy ◽  
Common Problems

Skeletal Class II malocclusion with mandibular deficiency is one of the most common problems that patients seek treatment. Adult patients with severe skeletal Class II malocclusion need orthognathic surgery for successful treatment. Bilateral sagittal split osteotomy (BSSO) is the most often preferred technique for these patients. This case report briefs about two male patient of age 24 years presented with Class II Skeletal relation, mesoprosopic facial form, horizontal growth pattern and Angle’s Class II div 1 malocclusion who were treated with Bilateral sagittal split osteotomy (BSSO) mandibular advancement. The ideal anteroposterior relation was established along with a Class I molar, incisor, canine relationship and ideal overjet, overbite and the overall facial esthetics were significantly improved. Combined surgical-orthodontic treatment aims to obtain a more harmonious facial, skeletal, dental and soft tissue relationship with an added patient self esteem.

scholarly journals Management of severe Class II malocclusion with sequential modified twin block and fixed orthodontic appliances

2016 ◽  
Vol 6 ◽  
pp. 113-118
Author(s):  
Sonal Chowdhary
Keyword(s):  
Class Ii ◽  
Mandibular Advancement ◽  
Orthodontic Appliances ◽  
Class Ii Malocclusion ◽  
Functional Appliance ◽  
Deep Bite ◽  
Twin Block ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Fixed Orthodontic Appliances

Functional appliance is an effective way of treating skeletal Class II malocclusion in children and adolescents. A 12 months stepwise mandibular advancement protocol with Herbst appliance has been proved to enhance condylar growth and improve mandibular prognathism. The present case report documents a 12-year-old boy presenting with Angle’s Class II, division 1 malocclusion associated with excessive overjet (11 mm), 100% deep bite, and retrognathic mandible. He was treated by a phase I growth modification therapy using twin block appliance with lip pads in a stepwise mandibular advancement protocol followed by a phase II preadjusted Edgewise appliance therapy.

scholarly journals Comparative Evaluation of Hard-Tissue and Soft-Tissue Changes following Fixed Functional Appliance Treatment in a Skeletal Class II Malocclusion Using Forsus and PowerScope

2021 ◽  
Author(s):  
Prajwal Shetty ◽  
Mukul Shetty ◽  
Maitreyi Chalapati ◽  
Chaitra Kori ◽  
Crystal Runa Soans ◽  
...  
Keyword(s):  
Soft Tissue ◽  
Class Ii ◽  
Class Ii Malocclusion ◽  
Functional Appliance ◽  
Skeletal Class ◽  
Fixed Functional Appliance ◽  
Skeletal Class Ii ◽  
Tissue Changes ◽  
Skeletal Effects ◽  
Soft Tissue Changes

Abstract Introduction The purpose of this study was to evaluate and compare the skeletal, dentoalveolar and soft-tissue effects of 2 fixed functional appliance; Forsus Fatigue Resistance Device (FFRD) and PowerScope appliance in treating patients with skeletal class II division 1 malocclusion. Materials and Methods This comparative prospective two-group study included 20 patients with a mean age of 11.2 ± 1.6 years with skeletal class II malocclusion with retrognathic mandible. One group was treated with FFRD, and second group was treated with PowerScope appliance. Lateral cephalograms were evaluated at T1 (pre-functional appliance treatment)) and at T2 (postappliance treatment). Cephalometric values were calculated and assessed to evaluate skeletal, dentoalveolar and soft-tissue changes. Results Sagittal correction of class II malocclusion appeared to be mainly achieved by dentoalveolar changes in the PowerScope group. The FFRD was able to induce both skeletal and dentoalveolar changes. A favorable influence on facial convexity was achieved by both groups. A significant increase in upper pharynx and lower pharynx dimension was seen in the PowerScope group. A statistically significant decrease in upper lip protrusion, increase in lower lip protrusion, increased nasolabial angle, and decrease in inferior labial sulcus were noted in both the groups. Lower incisors proclined more in the PowerScope group. Conclusion Both appliances were effective in correcting class II malocclusion. Forsus had more skeletal effects on the mandible, whereas PowerScope had less skeletal effects on the mandible and more dentoalveolar effects, contributing to class II correction. Both groups showed a significant improvement in soft-tissue profile. PowerScope group showed a significant increase in airway dimensions

Cheiloscopy: An Early Indicator of Class I & Class II Malocclusion

2019 ◽  
Vol 11 (2) ◽  
pp. 42-48
Author(s):  
Dr. Varsha Das ◽  
Dr. Vinaya .S. Pai ◽  
Dr. Siri Krishna ◽  
Dr. Shivaprasad Gaonkar ◽  
Dr. Gautham Kalladka ◽  
...  
Keyword(s):  
Class Ii ◽  
Class I ◽  
Class Ii Malocclusion ◽  
Type I ◽  
Type Ii ◽  
Early Indicator ◽  
Skeletal Class ◽  
Type Iv ◽  
Skeletal Class Ii ◽  
Type V

This study was done to determine & correlate the lip print patterns in Skeletal Class I & Class II malocclusions. A sample of 160 individuals (80 skeletal Class I & 80 skeletal Class II malocclusion) aged 12 years and above, were selected for the study. A dark coloured lipstick was applied onto the cleaned & dried lips with a single stroke. A lip impression was made on a transparent cellophane tape strip which was removed & stuck to a white bond paper. Lip print patterns were analysed based on the Tsuchihashi classification i.e. Type I, Type I’, Type II, Type III, Type IV & Type V. The field of observation was confined to 10mm on either side of the quadrant from the midline and the pattern was resolved by counting highest number of lines in this area. Statistical analyses indicated that the prevalence of Type I & Type II lip pattern was significantly higher in Skeletal Class I & Class II malocclusion subjects respectively. The results showed a significant correlation between lip prints and skeletal sagittal malocclusion. Cheiloscopy can act as an early indicator of skeletal malocclusions, but further research is required for the evaluation of lip prints in a larger sample with distinctinherited malocclusions.

scholarly journals Different approaches to the treatment of skeletal Class II malocclusion during growth: Bionator versus extraoral appliance

2020 ◽  
Vol 25 (2) ◽  
pp. 69-85 ◽  
Author(s):  
Renato Barcellos Rédua
Keyword(s):  
Treatment Plan ◽  
Class Ii ◽  
Class Ii Malocclusion ◽  
Skeletal Class ◽  
Skeletal Class Ii ◽  
Facial Esthetics ◽  
Significant Incidence ◽  
Division 1 ◽  
Treatment Alternatives

ABSTRACT Introduction: Class II malocclusion, which has a significant incidence in the population, may compromise facial esthetics and the smile, as well as the masticatory and respiratory functions. Often associated with skeletal abnormalities, it severely affects and compromises quality of life. An accurate diagnosis is fundamental to prepare a treatment plan to correct dental and skeletal anomalies. Objectives: This study discusses treatment alternatives to the correction of Class II division 1 and 2 malocclusion in growing patients, using a Bionator and an extraoral appliance.

Sign in / Sign up

Export Citation Format

Share Document