scholarly journals Effects of Reynolds number, baffle angle, and baffle distance on three-dimensional turbulent flow and heat transfer in a circular pipe

2015 ◽  
Vol 19 (5) ◽  
pp. 1633-1648 ◽  
Author(s):  
Oguz Turgut ◽  
Erkan Kizilirmak
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Friction Factor ◽  
Thermal Performance ◽  
Three Dimensional ◽  
Circular Pipe ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer

In this study, steady-state three-dimensional turbulent forced convection flow and heat transfer characteristics in a circular pipe with baffles attached inside pipe have been numerically investigated under constant wall heat flux boundary condition. Numerical study has been carried out for Reynolds number Re of 3000-50,000, Prandtl number Pr of 0.71, baffle distances s/D of 1, 2, and 3, and baffle angle a of 30o-150o. Ansys Fluent 12.0.1 software has been used to solve the flow field. It is observed that circular pipe having baffles has a higher Nusselt number and friction factor compared to the smooth circular pipe without baffles. Maximum Nusselt number and friction factor are obtained for the baffle angle of 90o. Nusselt number increases while baffle distance increases in the range of studied; however, friction factor decreases. Periodically fully developed conditions are obtained after a certain module. Thermal performance factor increases with increasing baffle distance in the rage of studied but decreases with increasing Reynolds number; maximum thermal performance factor is obtained for the baffle angle of 150?. Results show that baffle distance, baffle angle, and Reynolds number play important role on both flow and heat transfer characteristics. The accuracy of the results obtained in this study is verified by comparing the results with those available in the literature for smooth circular pipes. All the numerical results are correlated within accuracy of ?10 and ?15% for average Nusselt number and Darcy friction factor, respectively.

Numerical Study of Flow and Heat Transfer Characteristics of Impinging Jets

2010 ◽  
Author(s):  
Tarek M. Abdel-Salam
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Numerical Study ◽  
Three Dimensional ◽  
Impinging Jets ◽  
Two Dimensional ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer

This study presents results for flow and heat transfer characteristics of two-dimensional rectangular impinging jets and three-dimensional circular impinging jets. Flow geometries under consideration are single and multiple impinging jets issued from a plane wall. Both confined and unconfined configurations are simulated. Effects of Reynolds number and the distance between the jets are investigated. Results are obtained with a finite volume computational fluid dynamics (CFD) code. Structured grids are used in all cases of the present study. Turbulence is treated with a two equation k-ε model. Different jet velocities have been examined corresponding to Reynolds numbers of 5,000 to 20,000. Results of the three-dimensional cases show that Reynolds number has no effect on the velocity distribution of the center jet. Results of both two-dimensional and three-dimensional cases show that Reynolds number highly affects the heat transfer and values of the Nusselt number. The maximum Nusselt number was always found at the stagnation point of the center jet.

Numerical Investigation on the Flow and Heat Transfer Characteristics of the Superheated Steam in the Wedge Duct With Pin-Fins

2013 ◽  
Author(s):  
Gaoliang Liao ◽  
Xinjun Wang ◽  
Xiaowei Bai ◽  
Ding Zhu ◽  
Jinling Yao
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Three Dimensional ◽  
Heat Transfer Characteristics ◽  
Pin Fin ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Pin Fins ◽  
Steam Superheat

By using the CFX software, the three-dimensional flow and heat transfer characteristics in the cooling duct with pin-fin in the blade trailing edge were numerically simulated. The effects of pin-fin arrangements, Reynolds number, steam superheat degrees, streamwise pin density and convergence angle of the wedge duct on the flow and heat transfer characteristics were analysed. The results show that the Nusselt number on the endwall and pin-fin surfaces as well as the pin-fin row averaged Nusselt number increase with the increasing of Reynolds number, while it decreased with the with the increasing of X/D. The pressure drop increases with the increasing of Reynolds number while decreases with the increasing of X/D in the wedge duct. The degree of superheat has little effect on the pressure loss in the wedge duct. A comprehensive analysis and comparison show that the highest thermal performance is reached in the wedge duct when the value of X/D is 1.5.

Effect of the Inlet Geometry on the Flow and Heat Transfer Characteristics of Three-Dimensional Wall Jets

2019 ◽  
Vol 141 (11) ◽  
Author(s):  
Sangamesh C. Godi ◽  
Arvind Pattamatta ◽  
C. Balaji
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Three Dimensional ◽  
Heat Transfer Characteristics ◽  
Wall Jets ◽  
Number Range ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Circular Jets

Abstract In this work, fluid flow and heat transfer characteristics of three-dimensional (3D) wall jets exiting from a circular and square opening are presented based on experimental investigations. Two hydraulic diameters, namely, 2.5 and 7.5 mm and a Reynolds number range of 5000–20,000 have been considered. Mean velocity and turbulence intensity distribution in the walljet are quantified using a hot wire anemometry. Measurements are done both along the streamwise and spanwise directions. Transient infrared thermography is used for mapping the temperatures over the surface, and the heat transfer coefficients are estimated using a semi-infinite approximation methodology. Results show that, for circular jets, the effect of the jet diameter on the local and the spanwise-averaged Nusselt number is most pronounced near the jet exit. Further, it is also observed that circular jets have an edge over square jets. A correlation with a high correlation coefficient of 0.95 has been developed for spanwise average Nusselt number as a function of the Reynolds number and the dimensionless streamwise distance.

Numerical Investigation of Flow and Heat Transfer in Microchannels

2008 ◽  
Author(s):  
Emrah Deniz ◽  
I. Yalcin Uralcan
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Factor ◽  
Experimental Studies ◽  
Numerical Results ◽  
Turbulent Regime ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Micro Channels

Mini and microchannel applications have become an important and attractive research area during the past decades. For micro systems design purposes, numerical and experimental studies have been conducted on flow and heat transfer characteristics of mini and microchannels and various friction factor and Nusselt number correlations have been proposed. Some researchers have tried to apply conventional tube correlations to mini and micro channels, rather than deriving new correlations. In this study, using commercial CFD software, flow and heat transfer characteristics in laminar and turbulent flow through circular channels are analyzed numerically. The applicability of conventional correlations in calculating the friction factor and Nusselt number is investigated. It is concluded that, in laminar regime conventional correlations can be used to calculate the friction factor for the channel sizes considered. In turbulent regime, however, numerical results for friction factor yielded greater values than those calculated by the conventional correlations. Numerical Nusselt numbers are found to be closer to the conventional values in laminar and turbulent regimes. In turbulent regime, on the other hand, Nusselt number values calculated with the microchannel correlations are determined to be greater than the numerical results and the values calculated with the conventional correlations.

scholarly journals Numerical Investigations on Heat Transfer Characteristics of Single Particle and Hybrid Nanofluids in Uniformly Heated Tube

Symmetry ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 876
Author(s):  
Kunal Sandip Garud ◽  
Moo-Yeon Lee
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Performance Evaluation ◽  
Friction Factor ◽  
Volume Fraction ◽  
Evaluation Criteria ◽  
Hybrid Nanofluid ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics

In the present study, the heat transfer characteristics, namely, heat transfer coefficient, Nusselt number, pressure drop, friction factor and performance evaluation criteria are evaluated for water, Al2O3 and Al2O3/Cu nanofluids. The effects of Reynolds number, volume fraction and composition of nanoparticles in hybrid nanofluid are analyzed for all heat transfer characteristics. The single particle and hybrid nanofluids are flowing through a plain straight tube which is symmetrically heated under uniform heat flux condition. The numerical model is validated for Nusselt number within 7.66% error and friction factor within 8.83% error with corresponding experimental results from the previous literature study. The thermophysical properties of hybrid nanofluid are superior to the single particle nanofluid and water. The heat transfer coefficient, Nusselt number and pressure drop show increasing trend with increase in the Reynolds number and volume fraction. The friction factor shows the parabolic trend, and the performance evaluation criteria shows small variations with change in Reynolds number. However, both friction factor and performance evaluation criteria have increased with increase in the volume fraction. The 2.0% Al2O3/Cu with equal composition of both nanoparticles (50/50%) have presented superior heat transfer characteristics among all working fluids. Further, the heat transfer characteristics of 2.0% Al2O3/Cu hybrid nanofluid are enhanced by changing the nanoparticle compositions. The performance evaluation criteria for 2.0% Al2O3, 2.0% Al2O3/Cu (50/50%), 2.0% Al2O3/Cu (75/25%) and 2.0% Al2O3/Cu (25/75%) are evaluated as 1.08, 1.11, 1.10 and 1.12, respectively.

Numerical Study on Flow and Heat Transfer Characteristics of Jet Impingement

2011 ◽  
Author(s):  
Xinjun Wang ◽  
Rui Liu ◽  
Xiaowei Bai ◽  
Jinling Yao
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Average Nusselt Number ◽  
Jet Impingement ◽  
Target Surface ◽  
Heat Transfer Characteristics ◽  
Impingement Cooling ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer

A mathematical model used for studying jet impingement cooling characteristics is established, and the rationality of the calculation model and method is confirmed by the experimental data. The CFX software is used to numerically simulate the jet impingement cooling characteristics on a gas turbine blade. The effects of various parameters, such as the arrays of impinging nozzles, the jet Reynolds number, the jet-to-jet distance, the ratio of nozzle-to-surface spacing to jet diameter H/d, and the radius of curvature of the target surface, on the flow and heat transfer characteristics of a impingement cooling process are studied. The results indicate that the impingement jets can make complex vortex in the cooling channel, the flow boundary layer is extremely thin and highly turbulent. Underneath each impingement nozzle, there will appear a low temperature area and a peak of Nusselt number on the impingement target surface, the distribution of temperature and Nusselt number on the target surface are associated with arrangement of impingement nozzles. The average Nusselt number of the in-line arrangement nozzles is higher than that of the staggered arrangement ones. With the increasing of jet Reynolds number, the velocity impinging on the target surface and Nusselt number increase. However, heat transfer of impingement cooling on target surface is not sensitive to the jet nozzles distance; the velocity impinging on the target surface and Nusselt number decrease with the increasing of the H/d value. For the curved target surface cases, the average Nusselt number of the target surface and the effect of heat transfer decreased with the increasing of curvature radius R.

Numerical Study on Heat Transfer Characteristics in Rectangular Ducts With Pin-Fins

2011 ◽  
Author(s):  
Xinjun Wang ◽  
Xiaowei Bai ◽  
Jiangbo Wu ◽  
Rui Liu ◽  
Ding Zhu ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Numerical Study ◽  
Flow Direction ◽  
Three Dimensional ◽  
Heat Transfer Characteristics ◽  
Pin Fin ◽  
Transfer Characteristics ◽  
Pin Fins

By using the CFX software, three-dimensional flow and heat transfer characteristics in rectangular cooling ducts with in-line and staggered array pin-fins of gas turbine blade trailing edge were numerically simulated. The effects of in-line and staggered arrays of pin-fins, flow Reynolds number as well as density of cylindrical pin-fins in flow direction on heat transfer characteristics were analyzed. Both in the cases of in-line and staggered arrays of pin-fins, the results show that the pin-fin surface averaged Nusselt number increases with the increasing of Reynolds number. In the case of the same Reynolds number, the mean Nusselt number of pin-fin surface decreased with the increasing of X/D (the ratio of streamwise pin-pitch to pin-fin diameter) value. The Nusselt number increases gradually before the first pin-fin row and then reached the fully developed value at fourth or fifth row. The pin-fin Nusselt number at flow direction is larger than that at back flow direction. Along the height direction of pin-fin, the Nusselt number in middle area is larger.

Single-phase fluid flow and heat transfer characteristics of nanofluid in a circular microchannel: Development of flow and heat transfer correlations

2020 ◽  
Vol 234 (18) ◽  
pp. 3689-3708 ◽  
Author(s):  
Mangal Singh Lodhi ◽  
Tanuja Sheorey ◽  
Goutam Dutta
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Reynolds Number ◽  
Fluid Flow ◽  
Friction Factor ◽  
Nanoparticle Concentration ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Circular Microchannel

The convective heat transfer in microchannels with the use of nanofluids has proved to be a potential candidate for cooling of micro-electromechanical system devices. The current research article presents the experimental study on fluid flow and heat transfer characteristics of [Formula: see text]/water nanofluid in a microchannel under thermally developing laminar flow at Reynolds number ranging from 300 to 1000. The experimental set-up of a circular microchannel test section with an inner diameter of [Formula: see text] and length of [Formula: see text] is fabricated to conduct the experimental study. The effect of nanoparticle concentration ([Formula: see text]), Reynolds number ([Formula: see text]) on fluid flow and heat transfer characteristics of [Formula: see text]/water nanofluid have been measured and compared with that of distilled water (DW). The results indicate that the maximum enhancement in local heat transfer coefficient is achieved up to [Formula: see text], while friction factor is achieved up to [Formula: see text] for [Formula: see text]/water nanofluid with nanoparticle concentration of [Formula: see text] as compared to DW. The results showed that the performance evaluation criterion of [Formula: see text]/water nanofluid is greater than unity ([Formula: see text]), implying the benefits of nanofluids as compared to DW. Moreover, the predicted data obtained by the present proposed correlations for friction factor and local Nusselt number using [Formula: see text]/water nanofluid show reasonably good agreement with the deviations of [Formula: see text] and [Formula: see text], respectively, with the numerical data as compared to the predicted data obtained by the existing correlations available in the literature.

scholarly journals Uncertainties Analysis on the Prediction of Flow and Heat Transfer of Liquid Sodium with CFD Technology

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Zhanwei Liu ◽  
Xinyu Li ◽  
Tenglong Cong ◽  
Rui Zhang ◽  
Lingyun Zheng ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Liquid Sodium ◽  
Heat Transfer Characteristics ◽  
Backward Facing Step ◽  
Heating Wall ◽  
Transfer Characteristics ◽  
Cfd Models ◽  
Flow And Heat Transfer

The prediction of flow and heat transfer characteristics of liquid sodium with CFD technology is of significant importance for the design and safety analysis of sodium-cooled fast reactor. The accuracies and uncertainties of the CFD models should be evaluated to improve the confidence of the numerical results. In this work, the uncertainties from the turbulent model, boundary conditions, and physical properties for the flow and heat transfer of liquid sodium were evaluated against the experimental data. The results of uncertainty quantization show that the maximum uncertainties of the Nusselt number and friction coefficient occurred in the transition zone from the inlet to the fully developed region in the circular tube, while they occurred near the reattachment point in the backward-facing step. Furthermore, in backward-facing step flow, the maximum uncertainty of temperature migrated from the heating wall to the geometric center of the channel, while the maximum uncertainty of velocity occurred near the vortex zone. The results of sensitivity analysis illustrate that the Nusselt number was negatively correlated with the thermal conductivity and turbulent Prandtl number, while the friction coefficient was positively correlated with the density and Von Karman constant. This work can be a reference to evaluate the accuracy of the standard k-ε model in predicting the flow and heat transfer characteristics of liquid sodium.

Sign in / Sign up

Export Citation Format

Share Document