Angular Color Prediction Model for Anisotropic Halftone Prints on a Metallic Substrate

2019 ◽  
Vol 2019 (1) ◽  
pp. 159-169
Author(s):  
P. Pjanic ◽  
L. Yang ◽  
A. Teleman ◽  
R. D. Hersch

Under specular reflection, non-isotropic halftones such as line halftones printed on an ink-receiving plastic layer superposed with a metallic layer change their colors upon in-plane rotation of the print. This color change is due to the orientation-dependent optical dot gain of the halftone. A strong dot gain occurs when the incident light is perpendicular to the halftone line structure. A color prediction model is proposed which predicts under specular reflection the color of cyan, magenta and yellow line halftones as a function of the azimuthal rotation angle, the incident angle and the line frequency. The model is calibrated by measuring 17 reflectances at the (25° : 25°) measurement geometry, with the incident light parallel to the halftone lines. The model has been tested for several azimuthal rotation and incident viewing angles, each time for 125 different cyan, magenta and yellow ink surface coverages. The obtained prediction accuracies are between ΔE94 = 3.5 and ΔE94 = 7.

Fractals ◽  
1994 ◽  
Vol 02 (03) ◽  
pp. 413-416 ◽  
Author(s):  
E. MICHAEL SHIPULSKI ◽  
CHRISTOPHER A. BROWN

A computer simulation is described that models reflectivity as a set of discrete interactions, represented by perfectly reflecting, triangular mirrors fit to the surface using the patchwork method.1 The model is based on a premise that topographically dependent phenomena, such as reflectivity, interact with surfaces over certain scales and that these interaction scales can be used to characterize the interactions for use in the design evaluation of reflective topographies. The simulation is performed on a reflective topography and the results are discussed. Results from the simulation, plots of degree of specular reflection versus patch area, or scale, show that modeling the surface as a collection of mirrors of decreasing size results in less light reflected in the specular direction, or more scattering. Increased scattering from a reduction in patch size, or size of the interaction, models the increased scattering due to a reduction in wavelength of the incident light and reduced scattering due to an increase in incident angle, both shown experimentally in specular reflectance measurements.


Author(s):  
A. G. Belova ◽  
E. V. Zimina ◽  
N. P. Simbirtsev

During a pathoanatomic autopsy, it is very important to correctly assess the color change of the organs. However, it is not always clear because the color depends on the spectrum of the incident light. There is also a subjective assessment of color. In addition, in animals with large amounts of circulating blood, for example, dogs, early imbibition occurs, which makes it difficult to assess the color of the organ and pathoanatomical diagnosis. We have proposed a simple and visual method of recognition of two pathological processes – inflammation and edema using colored filters. This technique also allows to accurately differentiate inflammation from postmortem imbibition, to recognize fibrin and hemorrhage well. Postmortem examination of different types of animals (predacious families of mustelids, canids, felids) was performed in accordance with Shore’s method in the prosectorium of the Pathonomy Department, K.I. Skryabin Moscow State Academy of Veterinary Medicine and Biotechnology visual analysis – under various artificial lights (fluorescent lamps with banded spectrum and halogen lamps). In the red filter are well identified the pathological processes associated with the venous blood presence in the tissues (venous hyperemia and pulmonary edema). The focus of venous hyperemia or edema in the red filter looks like a dark zone, and tissues, where arterial bloods predominated, aren’t detected in red filter. In the yellow – green filter the inflammation is clearly detected: the zone is brightly red and surrounding tissues become dark. Red colour filters have rather narrow band of transmittance from 600 to 700 nm. Yellow-green have a width zone – from 500 to 700 nm, including both red, and yellow-green part of spectrum. Oxidized hemoglobin in red part of spectrum absorbs ten time weaker, has more high reflectivity and looks red. Surrounding tissues reflect the red rays, which incident on them also red. Therefore, the zone of edema, venous hyperemia and hemorrhaging, containing venous blood, are detected the dark spot, and inflammation zone merges with the red background. Oxidized hemoglobin in the red spectrum part absorbs ten time weaker than reduced hemoglobin, has high reflectivity of the red spectrum part and looks brightly red, surrounding tissues reflect yellow-green spectrum part and look green. Therefore, the zones of inflammation, active hyperemia and hemorrhaging, containing arterial blood, sharp contrast with green background and are clearly visible. Diagnoses made with the help of color filters are confirmed by histological studies.


1987 ◽  
Vol 65 (5) ◽  
pp. 919-923 ◽  
Author(s):  
A. Scott Hinman ◽  
Brad J. Pavelich

A versatile thin layer spectroelectrochemical cell employing specular reflection of the incident light beam from the electrode surface is described. Its application to in-situ uv–vis and FTIR characterization of the products of electrochemical reactions and to thin layer voltammetry and coulometry as well as conventional cyclic voltammetry is demonstrated for the oxidation of tetraphenylporphinatozinc in dichloroethane/tetrabutylammonium perchlorate solution. The advantages and disadvantages of this type of cell as compared to more conventional sandwich type optically transparent thin layer electrodes are discussed.


2021 ◽  
Vol 21 (8) ◽  
pp. 4192-4199
Author(s):  
Hyun-Ji Jeon ◽  
Ji-Yeon Kim ◽  
Jinnil Choi

A structure with periodic sub-wavelength nanohole patterns interacts with incident light and causes extraordinary optical transmission (EOT), with metal nanoparticles leading to localized surface plasmon resonance (LSPR) phenomena. To explore the effects of metal nanoparticles (NPs), optical analysis is performed for metal NP layers with periodic hole patterns. Investigation of Ag NP arrangements and comparisons with metal film structures are presented. Ag NP structures with different hole configuration are explored. Also, the effects of increasing light incident angle are investigated for metal NP structures where EOT peak at 460 nm wavelength is observed. Moreover, electric field distributions at each transmittance peak wavelengths and optical noise are analyzed. As a result, optical characteristics of metal NP structures are obtained and differences in resonance at each wavelength are highlighted.


2019 ◽  
Vol 5 (1) ◽  
pp. 7-11
Author(s):  
Maksim O. Usik ◽  
Igor V. Bychkov ◽  
Vladimir G. Shavrov ◽  
Dmitry A. Kuzmin

Abstract In the present work we theoretically investigated the excitation of surface plasmon-polaritons (SPPs) in deformed graphene by attenuated total reflection method. We considered the Otto geometry for SPPs excitation in graphene. Efficiency of SPPs excitation strongly depends on the SPPs propagation direction. The frequency and the incident angle of the most effective excitation of SPPs strongly depend on the polarization of the incident light. Our results may open up the new possibilities for strain-induced molding flow of light at nanoscales.


Mathematics ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1489
Author(s):  
Fukang Liu ◽  
Ying Guo ◽  
Shaojie Lv ◽  
Guange Chen

A modeling approach combining the entropy method and color difference formula is proposed in order to quantitatively evaluate diamond scintillation. The images of 66 diamonds were captured from 0° to 105° rotation at 15° intervals. The color difference of corresponding pixels in adjacent rotation angle images was calculated using a MatLab r2014a program, which indicated the diamond’s color change due to its scintillation. A threshold (10) was determined to divide the color difference into seven color difference intervals, the percentage of which indicated the color-change area. The color difference and the percentage were comprehensively analyzed using the entropy method to evaluate diamond scintillation objectively and quantitatively. Lightness was the main factor affecting the diamond scintillation while chroma and hue also significantly affected it.


2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Kun Gui ◽  
Jihong Zheng ◽  
Kangni Wang ◽  
Daoping Li ◽  
Songlin Zhuang

We report localized surface plasmon resonance (LSPR) of silver nanoparticles (NPs) embedded in interface of phase separation of holographic polymer-dispersed liquid crystal (H-PDLC) gratings using Finite-Difference Time Domain method. We show that silver NPs exhibit double resonance peak at the interface, and these peaks are influenced by the angle of incident light. We observe a blue shift of the wavelength of resonance peak as the incident angle increases. However, the location of silver NPs at the interface has nearly no effect on the wavelength of resonance peak. Also we show near-field and far-field properties surrounding silver NPs and find that field distribution can be controlled through rotation of incident angle. Therefore, LSPR properties of silver NPs within H-PDLC gratings can be excited by appropriate wavelength and angle of the incident light.


2012 ◽  
Vol 457-458 ◽  
pp. 1405-1408
Author(s):  
Tao Meng ◽  
Chun Mei Zhang ◽  
Mi Dan Li ◽  
Yi Xiao Song ◽  
Tai Sun ◽  
...  

The classical Clapper-Yule model and its improved models will both introduced the extended application which supports rough printing and halftone color fluorescent imaging. The characteristics of the new model were analyzed and the prospect of the Clapper-Yule mode was discussed. We proposed a new model, which was an enhancement of the classical Clapper-Yule model, which simulate optical dot gain of halftone prints by taking into account lateral scattering within the paper bulk and multiple internal reflections. The model we propose also takes into account the reflectance of inks at surface of the specific colors at specific rates. The model opens the way towards color separation of images to be reproduced. Several designs printed on an offset press demonstrate their applicability and their benefits.


2021 ◽  
Author(s):  
Giles Allison ◽  
Amrita Sana ◽  
Yuta Ogawa ◽  
Hidemi Kato ◽  
Kosei Ueno ◽  
...  

Abstract Surface plasmon resonance (SPR) is a well-established technology for real-time highly sensitive label-free detection and measurement of binding kinetics between biological samples. A common drawback, however, of SPR detection is the necessity for far field angular resolved measurement of specular reflection, which increases the size as well as requiring precise calibration of the optical apparatus. Here we present an alternative optoelectronic approach in which the plasmonic sensor is integrated within a photovoltaic cell. Incident light generates an electronic signal that is sensitive to the refractive index (RI) of a solution via interaction with the plasmon. The photogenerated current is enhanced due to the coupling of the plasmon mode with Fabry-Pérot (FP) modes in the absorbing layer of the photovoltaic cell. The near field electrical detection of SPR we demonstrate will enable a new generation of cheap, compact and high throughput biosensors.


Sign in / Sign up

Export Citation Format

Share Document