scholarly journals FEATURES OF SEDIMENTOGENESIS AS FORMATION FACTOR OF COAL-BED STRUCTURE OF EASTERN DONBASS AND THEIR DEVELOPMENT CONDITIONS

2015 ◽  
Author(s):  
В.В. Трощенко
Keyword(s):  
Key Words ◽  
Small Amplitude ◽  
Underground Mining ◽  
Coal Bed ◽  
Formation Factor ◽  
Coal Seams ◽  
Mining Conditions ◽  
Tectonic Dislocations ◽  
Sedimentation Conditions

Приведены результаты исследований влияния условий накопления осадков на формирование мало- амплитудной тектонической нарушенности и горно-геологические условия разработки угольных пластов There are adduced results of investigation of influence of sediments accumulation conditions on the formation of small-amplitude tectonic dislocations and mining conditions of coal seams. Key words: coal seams, coal-bearing deposits, sedimentation conditions, underground mining, mining conditions

The Nature of Mining-Induced Horizontal Displacement of Surface on the Example of Several Coal Mines

2014 ◽  
Vol 59 (4) ◽  
pp. 971-986 ◽  
Author(s):  
Krzysztof Tajduś
Keyword(s):  
Underground Mining ◽  
Mining Industry ◽  
Horizontal Displacement ◽  
Surface Slope ◽  
Proportionality Coefficient ◽  
Model Studies ◽  
Displacement Vectors ◽  
Mining Conditions ◽  
Design Projects ◽  
Academy Of Sciences

Abstract The paper presents the analysis of the phenomenon of horizontal displacement of surface induced by underground mining exploitation. In the initial part, the basic theories describing horizontal displacement are discussed, followed by three illustrative examples of underground exploitation in varied mining conditions. It is argued that center of gravity (COG) method presented in the paper, hypothesis of Awierszyn and model studies carried out in Strata Mechanics Research Institute of the Polish Academy of Sciences indicate the proportionality between vectors of horizontal displacement and the vector of surface slope. The differences practically relate to the value of proportionality coefficient B, whose estimated values in currently realized design projects for mining industry range between 0.23r to 0.42r for deep exploitations, whereas in the present article the values of 0.33r and 0.47r were obtained for two instances of shallow exploitation. Furthermore, observations on changes of horizontal displacement vectors with face advancement indicated the possibility of existence of COG zones above the mined-out field, which proved the conclusions of hitherto carried out research studies (Tajduś 2013).

Substantiation of safe underground mining in series of coal seams under hydraulic fill

2018 ◽  
Vol 8 ◽  
pp. 217-226
Author(s):  
Yu.I. Kutepov ◽  
◽  
A.S. Mironov ◽  
Yu.Yu. Kutepov ◽  
M.V. Sablin ◽  
...  
Keyword(s):  
Underground Mining ◽  
Coal Seams ◽  
Hydraulic Fill ◽  
In Series

Optimizing Shearer Web Width in Underground Mining of Gently Dipping Methane-Bearing Coal Seams

2019 ◽  
Vol 55 (6) ◽  
pp. 938-945
Author(s):  
A. A. Ordin ◽  
A. M. Timoshenko ◽  
D. V. Botvenko
Keyword(s):  
Underground Mining ◽  
Coal Seams

Modeling of the stress-state longwall face during coal mining with the technology of roof management complete drop and stowing

2020 ◽  
pp. 99-106
Author(s):  
I. E. Mazina ◽  
A. A. Stel’makhov ◽  
L. F. Mullagalieva
Keyword(s):  
Coal Mining ◽  
Strain State ◽  
Underground Mining ◽  
Negative Impact ◽  
Hydrological Regime ◽  
Coal Bed ◽  
Stress Strain ◽  
Environmental Friendliness ◽  
Modeling And Analysis ◽  
Stress Strain State

Underground mining of coal deposits has a negative impact on all components of the environment. When developing a coal deposit, it is coal mining technology that determines the scale and consequences of the negative impact. Changes in the stress-strain state of the geo-environment can lead to a violation of the hydrological regime, increased gas emission from the host rocks, the initiation of gas-dynamic processes. Choice of roofing management technology - as a geotechnological method of natural and technical system management determines the environmental friendliness of coal mining and creates safety conditions. The article deals with the technology of roofing control during coal production. For this purpose mathematical modeling and analysis of stress-strain state of the bottomhole part of the coal bed for the conditions of S.M. Kirov is performed. As a result of modeling, two technologies of roof control were analyzed - complete caving and stowing. For the worked out clearing leaves filled with either caving rocks or stowing material, there are characteristic unloading zones in the massif to be worked and overworked, as well as pressure reference zones, which fall on the parts of the pillars associated with the lava. It was found out that the application of the stowing technology creates conditions for minimization of gravitational stresses in the geoenvironment, as well as significantly reduces the potential energy of form change.

A Review of Technical Potential for Coal Production and Coal Degasification – A Conventional Source of Methane – In Nigeria

2003 ◽  
Vol 14 (1) ◽  
pp. 59-67
Author(s):  
Adepo Jepson Olumide ◽  
Ayodele Charles Oludare ◽  
Balogun Olufemi
Keyword(s):  
Coal Seam ◽  
Fossil Fuels ◽  
Underground Mining ◽  
Simple Calculation ◽  
Gas Content ◽  
Gelling Agent ◽  
Coal Bed ◽  
Natural State ◽  
Mining Operations ◽  
Inorganic Matter

Coal, a solid fuel in its natural state has been identified as one of the world's major fossil fuels. It is a compact, stratified mass of mummified plant debris interspersed with smaller amounts of inorganic matter buried in sedimentary rocks. The use of coal as an energy source can be dated back to the prehistoric times. Methane is associated with many if not all coal seams, and is the dreaded “fire damp” responsible for many pit explosions. Coal mines are designed to vent as much methane as possible. It is present in the pores of coal under pressure, released during mining operations and can be extracted through vertical well bores. This paper highlights the fact that pipeline- quality methane can be extracted economically from coal seems before and during underground mining operations. The stimulation method involves hydraulic fracturing of the coal seam by using water, sand and, a gelling agent in a staged and alternating sand/and no sand sequence. The purpose is to create new fractures in the coal seam(s). The cleating of the coal helps to determine the flow characteristics of the coal formation and is vital in the initial productivity of a coal-methane well. The simple calculation of gas-in-place is achieved by multiplying the gas content of the coal by net coal thickness, the density, and the aerial extent of the drainage. The method is claimed to be suitable for use in Nigeria and potential sites for coal bed methane extraction in Nigeria are identified.

scholarly journals Methane emissions against the background of natural and mining conditions in the Budryk and Pniówek mines in the Upper Silesian Coal Basin (Poland)

2021 ◽  
Vol 80 (22) ◽  
Author(s):  
Marcin Dreger ◽  
Sławomir Kędzior
Keyword(s):  
Methane Emissions ◽  
Geological Structure ◽  
Methane Content ◽  
Coal Extraction ◽  
Hard Coal ◽  
Coal Seams ◽  
Coal Basin ◽  
Related Factors ◽  
Upper Silesian Coal Basin ◽  
Mining Conditions

AbstractThe paper presents the variability of hard coal output, methane content and methane emissions into coal workings and into the atmosphere from the two most methane-gassy coal mines in Poland. The Budryk mine is one of the youngest mines in Poland, but it is the most methane-gassy as well. In 2016, the total CH4 emissions exceed 140 million of m3. This large increase in methane emissions to mine workings is primarily related to the increase in the depth of coal extraction (up to 1290 m) and, consequently, the rapid increase in the methane content in coal seams (up to 10–12 m3/Mg coaldaf). On the other hand, in the Pniówek mine, methane emission was the highest at the beginning of the study period (1986–1991). During the following years, emission decreased to the values of less than 140 million of m3, which were still one of the largest amounts of emitted methane in the entire Upper Silesian Coal Basin. The coexistence of natural factors, such as the geological structure and gas distribution, as well as mining-related factors, i.e. the depth of mining, the intensity of coal extraction determines the temporal variability of methane emissions in the studied mines.

Methane Injury-Risk at the Russian Mines

2021 ◽  
pp. 69-74
Author(s):  
V.S. Zaburdayev ◽  
◽  
S.N. Podobrazhin ◽  
Keyword(s):  
Injury Risk ◽  
Electrical Equipment ◽  
Coal Deposit ◽  
Coal Seams ◽  
Mining Operations ◽  
Mining Conditions ◽  
Scientific Substantiation ◽  
And Control ◽  
Gas Bearing ◽  
Engineering Personnel

Conditions are given concerning the development of methane-bearing coal seams in Russia, the chronology of injuries from explosions and outbreaks of methane-air mixtures at the Russian mines for a quarter of a century of developing coal seams at the nine deposits. The emergency was studied in 174 mine incidents, which occurred mainly at the mines of Kuzbass, Vorkuta coal deposit, Eastern Donbass, Chelyabinsk basin, Primorye and Sakhalin. Emergency objects - excavation areas, preparation faces and mined-out areas of the mines. The sources of ignition of methane-air mixture are drilling and blasting works in the faces, malfunctioning of electrical equipment, frictional sparking, endogenous fires, and smoking in the mines. The most injury-risk for methane are steep and steeply inclined mines. The need in the scientific substantiation of the decisions taken for prevention or reduction of the methane injury-risk at the mines is noted in the article. An important role is assigned to the choice of ways to achieve this goal considering the geological and mining conditions of the development of gas-bearing coal seams. As an example, the conditions, methods, and parameters of mining operations at the excavation areas of four mines are given, where occurred the catastrophic explosions of methane-air and methane-dust-air mixtures. The reasons are gross violations of safety rules during mining operations, incompetence of the mine engineering personnel, design, and control organizations in matters of safety during the underground work at the gas-hazardous mines with an extensive network of workings. This resulted in the death of miners and mine rescuers, the destruction of mine workings, equipment and devices, underground fires. Recommendations are given for reducing the level of methane injury-risk at the methane-rich mines.

Sign in / Sign up

Export Citation Format

Share Document