DHHFL-MABAC Approach based on DHHFLDM-LCME for Multi-criteria Group Decision Making Involving Sewage Treatment Company Selection

With the continuous acceleration of urban construction and development, ecological governance has become an important part of our green life. Therefore, how to select the appropriate governance company in the complex decision-making environment is very important. A double hierarchy hesitant fuzzy linguistic multi-attributive border approximation area method (DHHFL-MABAC) is proposed in this paper, which is based on distance measure and comprehensive weight. DHHFL-MABAC method not only considers the potential loss, but also has simple calculation and stable results. The double hierarchy hesitant fuzzy linguistic distance measure based on least common multiple (DHHFLDM-LCME) is proposed, which reduces the loss of original information and makes the result more accurate. Binary contrast method is proposed and combined with entropy weight to obtain comprehensive weight, which makes the determined weight more reasonable. Finally, this method is applied to the case selected by the sewage treatment company and proved its effectiveness.

Differences in the transient responses of individual glaciers: a case study of the Cascade Mountains of Washington State, USA

Mountain glaciers have response times that govern retreat due to anthropogenic climate change. We use geometric attributes to estimate individual response times for 383 glaciers in the Cascade mountain range of Washington State, USA. Approximately 90% of estimated response times are between 10 and 60 years, with many large glaciers on the short end of this distribution. A simple model of glacier dynamics shows that this range of response times entails consequential differences in recent and ongoing glacier changes: glaciers with decadal response times have nearly kept pace with anthropogenic warming, but those with multi-decadal response times are far from equilibrium, and their additional committed retreat stands well beyond natural variability. These differences have implications for changes in glacier runoff. A simple calculation highlights that transient peaks in area-integrated melt, either at the onset of forcing or due to variations in forcing, depend on the glacier's response time and degree of disequilibrium. We conclude that differences in individual response times should be considered when assessing the state of a population of glaciers and modeling their future response. These differences in response can arise simply from a range of different glacier geometries, and the same basic principles can be expected in other regions as well.

Fire resistance of partially encased composite columns subjected to eccentric loading

PurposeInvestigate the fire performance of eccentrically loaded concrete partially encased column (PEC), using the advanced calculation method (ANSYS 18.2, 2017) and the simple calculation method in Annex G of Eurocode 4 (EN 1994-1-2, 2005). This work examines the influence of a range of parameters on fire behaviour of the composite column including: eccentricity loading, slenderness, reinforcement, fire rating and fire scenario. In this study, ISO-834 (ISO834-1, 1999) was used as fire source.Design/methodology/approachCurrently, different methods of analysis used to assess the thermal behaviour of composite column exposed to fire. Analytical method named simplified calculation methods defined in European standard and numerical simulations named advanced calculation models are treated in this paper.FindingsThe load-bearing capacity of the composite column becomes very weak in the presence of the fire accident and eccentric loading, this recommends to avoid as much as possible eccentric loading during the design of construction building. The reinforcement has a slight influence on the temperature evolution; moreover, the reinforcement has a great contribution on the load capacity, especially in combined compression and bending. When only the two concrete sides are exposed to fire, the partially encased composite column presents a high load-bearing capacity value.Originality/valueThe use of a three-dimensional numerical model (ANSYS) allowed to describe easily the thermal behaviour of PEC columns under eccentric loading with the regard to the analytical method, which is based on three complex steps. In this study, the presence of the load eccentricity has found to have more effect on the load-bearing capacity than the slenderness of the composite column. Introducing a load eccentricity on the top of the column may have the same a reducing effect on the load-bearing capacity as the fire.

Pemilihan Daerah Penerima Bantuan Logistik Menggunakan Metode Simple Additive Weighting (SAW)

Deputy for Logistics and Equipment is a unit that handles requests for logistical assistance along with equipment in areas that need assistance related to disasters that occur. Provision of Logistics Assistance so far there are still some obstacles including the process of calculating each region that proposes logistics assistance is done with a simple calculation and using microsoft excell and aspects calculated only based on disaster-prone categories without taking into account other aspects. So that areas that really deserve logistical assistance become unable to get help. The solution to the problem is to use Simple Additive Weighting (SAW) algorithm that is applied to a decision support system. The results of the study in the form of a decision support system and the results of the system output showed that the recipient area was Aceh which was chosen with a score of 81.17.

Development of a Procedure for the Determination of the Buckling Resistance of Steel Spherical Shells According to EC 1993-1-6

This paper presents the process of developing a new procedure for estimating the buckling capacity of spherical shells. This procedure is based entirely on the assumptions included in the standard mentioned, EN-1993-1-6 and also becomes a complement of EDR5th by unifying provisions included in them. This procedure is characterized by clarity and its algorithm is characterized by a low degree of complexity. While developing the procedure, no attempt was made to change the main postulates accompanying the dimensions of the spherical shells. The result is a simple engineering approach to the difficult problem of determining the buckling capacity of a spherical shell. In spite of the simple calculation algorithm for estimating the buckling capacity of spherical shells, the results obtained reflect extremely accurately the behavior of real spherical shells, regardless of their geometry and the material used to manufacture them.

SEGMENT OF WALL PANEL FOR TIMBER STRUCTURES UNDER VERTICAL LOAD

The subject of this paper is an experimental and numerical analysis of the stability of the wall panels with one-side board sheathing for timber structures. The reinforcement of the panel is provided using glued timber composite I-shaped element consisting of a web made of a wood-based desk embedded into flanges of solid timber. The mechanism of the behaviour of these panels, mode of the failure and reliable procedure to determine the buckling load-bearing capacity not been fully explored so far. This work describes the behaviour of the wall panel under vertical load and the method of failure using experimental and numerical analysis. The reduction coefficient kJ was determined, which can be used for a simple calculation of the buckling capacity of a wall panel.

Commercial real estate finance and the lending cap rate

PurposeThe aim of this study is to report on a simple derivation that results in what the authors refer to as the lending cap rate. The lending cap rate is a unique cap rate resulting in a property valuation that perfectly aligns the maximum loan amount for the financing of commercial real estate.Design/methodology/approachThe derivation is the result of simple algebra relating the two most common underwriting ratios: debt service coverage and loan-to-value with the formula for the present value of an annuity. Numerical examples are presented to demonstrate the calculation of the lending cap rate, property valuation and maximum loan amount. The authors also present comparative statics results.FindingsThe main finding of this research is that once a lender knows the debt service coverage ratio, loan-to-value ratio and lending terms for a specific property financing request, a simple calculation reveals the lending cap rate and the property valuation that aligns the maximum loan amount implied by the two underwriting ratios.Practical implicationsOne practical implication of the research is that a simple calculation reveals the lending cap rate which facilitates timely property evaluations for lending purposes. The methods demonstrated also offer real estate finance educators a practical means of connecting the loan underwriting process with property appraisal thereby facilitating conceptual understanding.Originality/valueThe key finding is original, and the importance of the finding is that the determination of the lending cap rate is simple and has the ability to make commercial real estate lending faster and cheaper, especially in lending situations where an evaluation rather than an appraisal is appropriate.

Primal-Dual Splitting Algorithms for Solving Structured Monotone Inclusion with Applications

This work proposes two different primal-dual splitting algorithms for solving structured monotone inclusion containing a cocoercive operator and the parallel-sum of maximally monotone operators. In particular, the parallel-sum is symmetry. The proposed primal-dual splitting algorithms are derived from two approaches: One is the preconditioned forward–backward splitting algorithm, and the other is the forward–backward–half-forward splitting algorithm. Both algorithms have a simple calculation framework. In particular, the single-valued operators are processed via explicit steps, while the set-valued operators are computed by their resolvents. Numerical experiments on constrained image denoising problems are presented to show the performance of the proposed algorithms.

Smartphones as detector the speed of sound: A classroom explanation and demonstration

This paper presents how smartphones determine the speed of sound (C) with a classroom explanation and demonstration to design a variety of lab instruments. Smartphone sensors such as mics and speakers were used as experimental tools by students for calculating the value of speed of sound. Mathematics is used to describe physics principles using only the mean of repetitive experimental results. After conducting an experiment with 43 students, majoring in general science, faculty of education and educational innovation, Kalasin University, the students report the value of the speed of sound nearly to theoretical values with a percentage difference of less than 0.1%, equipment used in everyday life in the classroom, equipment that is cheap, along with a simple calculation of speed of sound, is an advantage of this experiment.

Efficient SAR Azimuth Ambiguity Reduction in Coastal Waters Using a Simple Rotation Matrix: The Case Study of the Northern Coast of Jeju Island

Azimuth ambiguities, or ghosts on SAR images, represent one of the main obstacles for SAR applications involving coastal monitoring activities such as ship detection. While most previous methods based on azimuth antenna pattern and direct filtering are effective for azimuth ambiguity suppression, they may not be effective for fast cruising small ships. This paper proposes a unique approach for the reduction of azimuth ambiguities or ghosts in SAR single-look complex (SLC) images using a simple rotation matrix. It exploits the fact that the signal powers of azimuth ambiguities are concentrated on narrow bands, while those of vessels or other true ground targets are dispersed over broad bands. Through sub-aperture processing and simple axis rotation, it is possible to concentrate the dispersed energy of vessels onto a single axis while the ghost signal powers are dispersed onto three different axes. Then, the azimuth ambiguities can be easily suppressed by a simple calculation of weighted sum and difference, while preserving vessels. Applied results achieved by processing TerrSAR-X SLC images are provided and discussed. An optimum weight of 0.5 was determined by Receiver Operating Characteristic (ROC) analysis. Capabilities of ship detection from the test image were significantly improved by removing 93% of false alarms. Application results demonstrate its high performance of ghost suppression. This method can be employed as a pre-processing tool of SAR images for ship detection in coastal waters.