Capacitive wireless powering for electric vehicles with near-field phased arrays

Author(s):  
Jose Estrada ◽  
Sreyam Sinha ◽  
Brandon Regensburger ◽  
Khurram Afridi ◽  
Zoya Popovic
2021 ◽  
pp. 24-35
Author(s):  
V. Yu. Titov

The article is devoted to possibilities of regular focusing of Omniscan device on phased arrays. Questions are raised about evaluation of testing results when using linear and sector scan-ning with different focus parameters. The question of size near-field for phased arrays and asso-ciated choice of focus mode is discussed. The article is based on experiments conducted on samples with artificial reflectors at the same size, but different in type: a non-directional reflector (a side-drill hole) and a directional reflector (a flat-bottomed reflector), located at the same depth. The study was conducted for transducers with different frequencies. Families of curves of the signal amplitude dependence are obtained: on depth reflector, on focus depth setting, and on type reflector. The results emphasize need for precise focusing with-in the near-field of the transducer for small thicknesses or shallow depth of occurrence of discontinuities, and large variability in choice of focusing for depths in far-field. The study notes a significant difference in values of depth reflector at different focusses at a fixed position of transducer. In this article, in addition to considering possibility of focusing a flaw detector with phased arrays, the focus is on interpretation of results and reliability of testing in the analysis and comparison data. An integral part of the technological testing protocol for phased array is the depth of focus and the type of scanning. The obtained data do not depend on the frequency of transducer, which means that conclusions are applicable to general range of flaw detectors on phased arrays.


2012 ◽  
Vol 60 (6) ◽  
pp. 2711-2718 ◽  
Author(s):  
Andrew E. Sayers ◽  
W. Mark Dorsey ◽  
Kenneth W. O'Haver ◽  
John A. Valenzi

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Sokol Kuka ◽  
Kai Ni ◽  
Mohammed Alkahtani

AbstractOver the past few years, interest and research in wireless power transfer (WPT) have been rapidly incrementing, and as an effect, this is a remarkable technology in many electronic devices, electric vehicles and medical devices. However, most of the applications have been limited to very close distances because of efficiency concerns. Even though the inductive power transfer technique is becoming relatively mature, it has not shown near-field results more than a few metres away transmission. This review is focused on two fundamental aspects: the power efficiency and the transmission distance in WPT systems. Introducing the principles and the boundaries, scientific articles will be reviewed and discussed in terms of their methods and respective challenges. This paper also shows more important results in efficiency and distance obtained, clearly explaining the theory behind and obstacles to overcome. Furthermore, an overlook in other aspects and the latest research studies for this technology will be given. Moreover, new issues have been raised including safety and security.


1980 ◽  
Vol 2 (4) ◽  
pp. 338-369 ◽  
Author(s):  
Andre J. Duerinckx

Gaussian apodization weighting functions matched to the time delay distribution for focusing of phased arrays are introduced. The matching concept is based upon the theory of eigenmodes of freely propagating acoustic beams with a finite cross-section. The effect of this matched gaussian apodization on the beam cross-section is analysed for several acoustic phased array configurations generating acoustic wavefronts in a weakly attenuating and homogeneous medium. A strength of focusing parameter is introduced. The relation between apodization parameters and the strength of focusing is analyzed and illustrated. For strong focusing the parameters of the gaussian matched apodization become independent of the focal range. A simulator was developed which allows the study of acoustic pressure waves in the near-field and far-field generated by a linear phased array excited with short pulses. The simulator provides 2-D and 3-D representations of acoustic wave fronts generated by a pulsed phased array, illustrating the effects of apodization for pulsed acoustic beams in the time-space domain.


Sign in / Sign up

Export Citation Format

Share Document