Prototype Evaluation of Antennas with Artificial Magnetic Conductor for Firefighter Support Systems

Author(s):  
Yusuke Ikuma ◽  
Takahiko Yamamoto ◽  
Masayuki Mizuno ◽  
Yoshifumi Ohmiya ◽  
Kohji Koshiji ◽  
...  
2021 ◽  
Vol 11 (5) ◽  
pp. 2237
Author(s):  
Oh Heon Kwon ◽  
Won Bin Park ◽  
Juho Yun ◽  
Hong Jun Lim ◽  
Keum Cheol Hwang

In this paper, a low-profile HF (high-frequency) meandered dipole antenna with a ferrite-loaded artificial magnetic conductor (AMC) is proposed. To operate in the HF band while retaining a compact size, ferrite with high permeability is applied to the unit cell of the AMC. The operating frequency bandwidth of the designed unit cell of the AMC is 1.89:1 (19–36 MHz). Thereafter, a meandered dipole antenna is designed by implementing a binary genetic algorithm and is combined with the AMC. The overall size of the designed antenna is 0.06×0.06×0.002 λ3 at the lowest operating frequency. The proposed dipole antenna with a ferrite-loaded AMC is fabricated and measured. The measured VSWR bandwidth (<3) covers 20–30 MHz on the HF band. To confirm the performance of the antenna, a reference monopole antenna which operates on the HF band was selected, and the measured receiving power is compared with the result of the proposed antenna with the AMC.


Frequenz ◽  
2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Maksud Alam ◽  
Amber Khan ◽  
Mainuddin ◽  
Binod Kumar Kanaujia ◽  
Mirza Tariq Beg

AbstractIn this paper a coplanar waveguide feed (CPW) monopole antenna backed with artificial magnetic conductor (AMC) structure for efficient radiation has been presented for off-body wearable applications. A split ring resonator (SRR) having thiner and longer lines to produce higher inductance and six splits with smaller gaps for high capacitance have been placed underneath CPW fed monopole to achieve resonance mode at a lower frequency. Higher values of inductance and capacitance produce resonant modes at relatively lower frequencies resulting in highly miniaturized antenna. The desired −10dB S11 bandwidth has been optimized firstly, by tuning/optimizing flow of surface currents with the help of several slots/slits and later by realizing AMC reflector with the help of full ground backed foam. The proposed antenna covers 2.45 GHz industrial, scientific and medical (ISM) band body area network (BAN) application and posses good front to back ratio (FBR) and thereby low and acceptable values of specific absorption rate (SAR). The proposed antenna has been designed and simulated using Ansys high frequency structured simulator and tested using vector network analyzer and anechoic chamber. The simulated and measured results well agree with each other.


2017 ◽  
Vol 16 ◽  
pp. 2396-2399 ◽  
Author(s):  
Saud M. Saeed ◽  
Constantine A. Balanis ◽  
Craig R. Birtcher ◽  
Ahmet C. Durgun ◽  
Hussein N. Shaman

Sign in / Sign up

Export Citation Format

Share Document