scholarly journals Turbo codes and turbo algorithms

2017 ◽  
Vol 2 (3) ◽  
pp. 179
Author(s):  
Claude Berrou ◽  
Charlotte Langlais ◽  
Yi Yu
Keyword(s):  
Turbo Codes ◽  
Iterative Decoding ◽  
Communication Systems ◽  
Evaluation Method ◽  
Multiple Input Multiple Output ◽  
Convolutional Codes ◽  
Error Performance ◽  
Iterative Processing ◽  
Input Multiple Output ◽  
Basic Ideas

In the first part of this paper, several basic ideas that prompted the coming of turbo codes are commented on. We then present some personal points of view on the main advances obtained in past years on turbo coding and decoding such as the circular trellis termination of recursive systematic convolutional codes and double-binary turbo codes associated with Max-Log-MAP decoding. A novel evaluation method, called genieinitialised iterative processing (GIIP), is introduced to assess the error performance of iterative processing. We show that using GIIP produces a result that can be viewed as a lower bound of the maximum likelihood iterative decoding and detection performance. Finally, two wireless communication systems are presented to illustrate recent applications of the turbo principle, the first one being multiple-input/multiple-output channel iterative detection and the second one multi-carrier modulation with linear precoding.

scholarly journals Iterative Decoding of Turbo Codes

2018 ◽  
Vol 3 ◽  
pp. 15
Author(s):  
Dhaneshwar Sah
Keyword(s):  
Turbo Codes ◽  
Coding Theory ◽  
Iterative Decoding ◽  
Communication Systems ◽  
Error Control ◽  
Viterbi Algorithm ◽  
Convolutional Codes ◽  
Soft Information ◽  
Space Communications ◽  
College Of Engineering

<p><strong> </strong>This paper presents a Thesis which consists of a study of turbo codes as an error-control Code and the software implementation of two different decoders, namely the Maximum a Posteriori (MAP), and soft- Output Viterbi Algorithm (SOVA) decoders. Turbo codes were introduced in 1993 by berrouet at [2] and are perhaps the most exciting and potentially important development in coding theory in recent years. They achieve near- Shannon-Limit error correction performance with relatively simple component codes and large interleavers. They can be constructed by concatenating at least two component codes in a parallel fashion, separated by an interleaver. The convolutional codes can achieve very good results. In order of a concatenated scheme such as a turbo codes to work properly, the decoding algorithm must affect an exchange of soft information between component decoders. The concept behind turbo decoding is to pass soft information from the output of one decoder to the input of the succeeding one, and to iterate this process several times to produce better decisions. Turbo codes are still in the process of standardization but future applications will include mobile communication systems, deep space communications, telemetry and multimedia. Finally, we will compare these two algorithms which have less complexity and which can produce better performance.</p><p><strong>Journal of Advanced College of Engineering and Management</strong>, Vol.3, 2017, Page: 15-30</p>

scholarly journals Study of 5G-NR-MIMO Links in the Presence of an Interferer

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 732
Author(s):  
Avner Elgam ◽  
Yael Balal ◽  
Yosef Pinhasi
Keyword(s):  
Mobile Networks ◽  
Communication Systems ◽  
Multiple Input Multiple Output ◽  
Local Area ◽  
Maximum Energy ◽  
Base Station ◽  
Small Cells ◽  
Diversity Coding ◽  
Shift Keying ◽  
Input Multiple Output

Many communication systems are based on the Multiple Input, Multiple Output (MIMO) scheme, and Orthogonal Space–time Block Transmit diversity Coding (OSTBC), combined with Maximal Ratio Receive Combining (MRRC), to create an optimal diversity system. A system with optimal diversity fixes and optimizes the channel’s effects under multi-path and Rayleigh fading with maximum energy efficiency; however, the challenge does not end with dealing with the channel destruction of the multi-path impacts. Susceptibility to interference is a significant vulnerability in future wireless mobile networks. The 5th Generation New Radio (5G-NR) technologies bring hundreds of small cells and pieces of User Equipment (UE) per indoor or outdoor local area scenario under a specific Long Term Evolution (LTE)-based station (e-NodeB), or under 5G-NR base-station (g-NodeB). It is necessary to study issues that deal with many interference signals, and smart jammers from advanced communication equipment cause deterioration in the links between the UE, the small cells, and the NodeB. In this paper, we study and present the significant impact and performances of 2×2 Alamouti Phase-Shift Keying (PSK) modulation techniques in the presence of an interferer and a smart jammer. The destructive effects affecting the MIMO array and the advanced diversity technique without closed-loop MIMO are analyzed. The performance is evaluated in terms of Bit Error Rate (BER) vs. Signal to Interference Ratio (SIR). In addition, we proved the impairment of the orthogonal spectrum assumption mathematically.

PROBLEM STATEMENT OF JOINT ANTENNA SELECTION AND PRECODING IN MASSIVE MIMO COMMUNICATION SYSTEMS

2021 ◽  
Author(s):  
В.Б. КРЕЙНДЕЛИН ◽  
М.В. ГОЛУБЕВ
Keyword(s):  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Antenna Selection ◽  
Multiple Input Multiple Output ◽  
Research Areas ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Legal Restrictions ◽  
Multiple Transmission

Совместный с прекодингом автовыбор антенн на приемной и передающей стороне - одно из перспективных направлений исследований для реализации технологий Multiple Transmission and Reception Points (Multi-TRP, множество точек передачи и приема) в системах со многими передающими и приемными антеннами Massive MIMO (Multiple-Input-Multiple-Output), которые активно развиваются в стандарте 5G. Проанализированы законодательные ограничения, влияющие на применимость технологий Massive MIMO, и специфика реализации разрабатываемого алгоритма в миллиметровомдиапа -зоне длин волн. Рассмотрены алгоритмы формирования матриц автовыбора антенн как на передающей, так и на приемной стороне. Сформулирована строгая математическая постановка задачи для двух критериев работы алгоритма: максимизация взаимной информации и минимизация среднеквадратичной ошибки. Joint precoding and antenna selection both on transmitter and receiver sides is one of the promising research areas for evolving toward the Multiple Transmission and Reception Points (Multi-TRP) concept in Massive MIMO systems. This technology is under active development in the coming 5G 3GPP releases. We analyze legal restrictions for the implementation of 5G Massive MIMO technologies in Russia and the specifics of the implementation of the developed algorithm in the millimeter wavelength range. Algorithms of antenna auto-selection matrices formation on both transmitting and receiving sides are considered. Two criteria are used for joint antenna selection and precoding: maximizing mutual information and minimizing mean square error.

scholarly journals Covert Communication in MIMO-OFDM System Using Pseudo Random Location of Fake Subcarriers

2016 ◽  
Vol 4 (1) ◽  
pp. 150-163 ◽  
Author(s):  
Rizky Pratama Hudhajanto ◽  
I Gede Puja Astawa ◽  
Amang Sudarsono
Keyword(s):  
Communication Systems ◽  
Orthogonal Frequency Division Multiplexing ◽  
Random Sequence ◽  
Multiple Input Multiple Output ◽  
Ofdm System ◽  
Transmission Scheme ◽  
Sensitive Data ◽  
Input Multiple Output ◽  
Mimo Ofdm ◽  
Random Location

Multiple-Input Multiple-Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) is the most used wireless transmission scheme in the world. However, its security is the interesting problem to discuss if we want to use this scheme to transmit a sensitive data, such as in the military and commercial communication systems. In this paper, we propose a new method to increase the security of MIMO-OFDM system using the change of location of fake subcarrier. The fake subcarriers’ location is generated per packet of data using Pseudo Random sequence generator. The simulation results show that the proposed scheme does not decrease the performance of conventional MIMO-OFDM. The attacker or eavesdropper gets worse Bit Error Rate (BER) than the legal receiver compared to the conventional MIMO-OFDM system.

scholarly journals Performance analysis of IEEE 802.11ac based WLAN in wireless communication systems

2019 ◽  
Vol 9 (2) ◽  
pp. 1131 ◽  
Author(s):  
A. Z. Yonis
Keyword(s):  
Communication Systems ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Multiple Input Multiple Output ◽  
Local Area ◽  
Area Network ◽  
Data Rates ◽  
Input Multiple Output ◽  
Ieee 802.11Ac ◽  
5 Ghz

<p><span lang="EN-US">IEEE 802.11ac based wireless local area network (WLAN) is emerging WiFi standard at 5 GHz, it is new gigabit-per-second standard providing premium services. IEEE 802.11ac accomplishes its crude speed increment by pushing on three distinct measurements firstly is more channel holding, expanded from a maximum of 80 MHz up to 160 MHz modes. Secondly, the denser modulation, now using 256-QAM, it has the ability to increase the data rates up to 7 Gbps using an 8×8 multiple input multiple output (MIMO). Finally, it provides high resolution for both narrow and medium bandwidth channels. This work presents a study to improve the performance of IEEE 802.11ac based WLAN system.</span></p>

Sign in / Sign up

Export Citation Format

Share Document