PROBLEM STATEMENT OF JOINT ANTENNA SELECTION AND PRECODING IN MASSIVE MIMO COMMUNICATION SYSTEMS

2021 ◽  
Author(s):  
В.Б. КРЕЙНДЕЛИН ◽  
М.В. ГОЛУБЕВ
Keyword(s):  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Antenna Selection ◽  
Multiple Input Multiple Output ◽  
Research Areas ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Legal Restrictions ◽  
Multiple Transmission

Совместный с прекодингом автовыбор антенн на приемной и передающей стороне - одно из перспективных направлений исследований для реализации технологий Multiple Transmission and Reception Points (Multi-TRP, множество точек передачи и приема) в системах со многими передающими и приемными антеннами Massive MIMO (Multiple-Input-Multiple-Output), которые активно развиваются в стандарте 5G. Проанализированы законодательные ограничения, влияющие на применимость технологий Massive MIMO, и специфика реализации разрабатываемого алгоритма в миллиметровомдиапа -зоне длин волн. Рассмотрены алгоритмы формирования матриц автовыбора антенн как на передающей, так и на приемной стороне. Сформулирована строгая математическая постановка задачи для двух критериев работы алгоритма: максимизация взаимной информации и минимизация среднеквадратичной ошибки. Joint precoding and antenna selection both on transmitter and receiver sides is one of the promising research areas for evolving toward the Multiple Transmission and Reception Points (Multi-TRP) concept in Massive MIMO systems. This technology is under active development in the coming 5G 3GPP releases. We analyze legal restrictions for the implementation of 5G Massive MIMO technologies in Russia and the specifics of the implementation of the developed algorithm in the millimeter wavelength range. Algorithms of antenna auto-selection matrices formation on both transmitting and receiving sides are considered. Two criteria are used for joint antenna selection and precoding: maximizing mutual information and minimizing mean square error.

scholarly journals An Efficient Precoding Scheme for Millimeter-Wave Massive MIMO Systems

Electronics ◽  
2019 ◽  
Vol 8 (9) ◽  
pp. 927 ◽  
Author(s):  
Alemaishat ◽  
Saraereh ◽  
Khan ◽  
Affes ◽  
Li ◽  
...  
Keyword(s):  
Computational Complexity ◽  
Millimeter Wave ◽  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Beam Control ◽  
Low Computational Complexity ◽  
Multiple Input ◽  
Input Multiple Output

Aiming at the problem of high computational complexity due to a large number of antennas deployed in mmWave massive multiple-input multiple-output (MIMO) communication systems, this paper proposes an efficient algorithm for optimizing beam control vectors with low computational complexity based on codebooks for millimeter-wave massive MIMO systems with split sub-arrays hybrid beamforming architecture. A bidirectional method is adopted on the beam control vector of each antenna sub-array both at the transmitter and receiver, which utilizes the idea of interference alignment (IA) and alternating optimization. The simulation results show that the proposed algorithm has low computational complexity, fast convergence, and improved spectral efficiency as compared with the state-of-the-art algorithms.

scholarly journals An Improved Jacobi-Based Detector for Massive MIMO Systems

Information ◽  
2019 ◽  
Vol 10 (5) ◽  
pp. 165 ◽  
Author(s):  
Xiaoqing Zhao ◽  
Zhengquan Li ◽  
Song Xing ◽  
Yang Liu ◽  
Qiong Wu ◽  
...  
Keyword(s):  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Minimum Mean Square Error ◽  
Multiple Input Multiple Output ◽  
Correction Method ◽  
Detection Algorithm ◽  
Detection Accuracy ◽  
Input Multiple Output ◽  
Mmse Detector

Massive multiple-input-multiple-output (MIMO) is one of the key technologies in the fifth generation (5G) cellular communication systems. For uplink massive MIMO systems, the typical linear detection such as minimum mean square error (MMSE) presents a near-optimal performance. Due to the required direct matrix inverse, however, the MMSE detection algorithm becomes computationally very expensive, especially when the number of users is large. For achieving the high detection accuracy as well as reducing the computational complexity in massive MIMO systems, we propose an improved Jacobi iterative algorithm by accelerating the convergence rate in the signal detection process.Specifically, the steepest descent (SD) method is utilized to achieve an efficient searching direction. Then, the whole-correction method is applied to update the iterative process. As the result, the fast convergence and the low computationally complexity of the proposed Jacobi-based algorithm are obtained and proved. Simulation results also demonstrate that the proposed algorithm performs better than the conventional algorithms in terms of the bit error rate (BER) and achieves a near-optimal detection accuracy as the typical MMSE detector, but utilizing a small number of iterations.

scholarly journals An Evaluation of Successive Pilot Decontamination in Massive MIMO

2018 ◽  
Vol 39 (2) ◽  
pp. 107
Author(s):  
Victor Croisfelt Rodrigues ◽  
Taufik Abrão
Keyword(s):  
Spectral Efficiency ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Pilot Training ◽  
Pilot Contamination ◽  
Fundamental Issue ◽  
Data Rates ◽  
Multiple Input ◽  
Input Multiple Output

The demand for higher data rates can be satisfied by the spectral efficiency (SE) improvement offered by Massive multiple-input multiple-output (M-MIMO) systems. However, the pilot contamination remains as a fundamental issue to obtain the paramount SE in such systems. This propitiated the research of several methods to mitigate pilot contamination. One of these procedures is based on the coordination of the cells, culminating in proposals with multiple pilot training phases. This paper aims to expand the results of the original paper, whereby the concepts of large pilot training phases were offered. The evaluation of such method was conducted through more comprehensible numerical results, in which a large number of antennas were assumed and more rigorous SE expressions were used. The channel estimation approaches relying on multiple pilot training phases were considered cumbersome for implementation and an uninteresting solution to overcome pilot contamination; contradicting the results presented in the genuine paper.

scholarly journals Editorial: Special Issue “Massive MIMO and mm-Wave Communications”

Sensors ◽  
2022 ◽  
Vol 22 (2) ◽  
pp. 519
Author(s):  
Gianmarco Romano
Keyword(s):  
Millimeter Wave ◽  
Massive Mimo ◽  
Communication Systems ◽  
Multiple Input Multiple Output ◽  
Data Traffic ◽  
Special Issue ◽  
Editorial Special Issue ◽  
Multiple Input ◽  
Key Technologies ◽  
Input Multiple Output

Massive multiple-input multiple-output (mMIMO) communication systems and the use of millimeter-wave (mm-Wave) bands represent key technologies that are expected to meet the growing demand of data traffic and the explosion of the number of devices that need to communicate over 5G/6G wireless networks [...]

scholarly journals An improvement to hybrid beamforming precoding scheme for mmWave massive MIMO systems based on channel matrix

2021 ◽  
Vol 23 (1) ◽  
pp. 285
Author(s):  
Zahra Amirifar ◽  
Jamshid Abouei
Keyword(s):  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Wireless Systems ◽  
Achievable Rate ◽  
Percentage Difference ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Hybrid Beamforming ◽  
Mimo Technology

<p>The massive multiple-input multiple-output (MIMO) technology has been applied innew generation wireless systems due to growing demand for reliability and high datarate. Hybrid beamforming architectures in both receiver and transmitter, includinganalog and digital precoders, play a significant role in 5G communication networksand have recently attracted a lot of attention. In this paper, we propose a simple andeffective beamforming precoder approach for mmWave massive MIMO systems. Wefirst solve an optimization problem by a simplification subject, and in the second step,we use the covariance channel matrixfCk=Cov(Hk)andBk=HkHHkinstead of chan-nel matrixHk. Simulation results verify that the proposed scheme can enjoy a highersum rate and energy efficiency than previous methods such as spatially sparse method,analog method, and conventional hybrid method even with inaccurate Channel StateInformation (CSI). Percentage difference of the achievable rate ofCk=Cov(Hk)andBk=HkHHkschemes compared to conventional methods are 2.51% and 48.94%, re-spectively.</p>

scholarly journals Efficient Power Allocation for LDPC-Coded MIMO Systems

2011 ◽  
pp. 127-133
Author(s):  
Layak Ali Sd ◽  
K. Kishan Rao ◽  
M. Sushanth Bab
Keyword(s):  
Interference Cancellation ◽  
Communication Systems ◽  
Mimo Systems ◽  
Geometric Mean ◽  
Multiple Input Multiple Output ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Coded Systems ◽  
Efficient Power ◽  
Q Function

In this papers an efficient ordering scheme for an ordered successive interference cancellation detector is determined under the bit error rate minimization criterion for multiple-input multiple-output(MIMO) communication systems using transmission power control. From the convexity of the Q-function, we evaluate the choice of suitable quantization characteristics for both the decoder messages and the received samples in Low Density Parity Check (LDPC)-coded systems using M-QAM schemes. We derive the ordering strategy that makes the channel gains converge to their geometric mean. Based on this approach, the fixed ordering algorithm is first designed, for which the geometric mean is used for a constant threshold using correlation among ordering results.

scholarly journals Efficient Pilot Decontamination Schemes in 5G Massive MIMO Systems

Electronics ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 55 ◽  
Author(s):  
Omar A. Saraereh ◽  
Imran Khan ◽  
Byung Moo Lee ◽  
Ashraf Tahat
Keyword(s):  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Path Loss ◽  
Achievable Rate ◽  
Pilot Contamination ◽  
User Grouping ◽  
Channel Conditions ◽  
Input Multiple Output

Massive Multiple-input Multiple-output (MIMO) is an emerging technology for the 5G wireless communication systems which has the potential to provide high spectral efficient and improved link reliability and accommodate large number of users. Aiming at the problem of pilot contamination in massive MIMO systems, this paper proposes two algorithms to mitigate it. The first algorithm is depending on the idea of Path Loss to perform User Grouping (PLUG) which divide the users into the center and edge user groups depending on different levels of pilot contamination. It assigns the same pilot sequences to the center users which slightly suffer from pilot contamination and assign orthogonal pilot sequences to the edge users which severely suffer from pilot contamination. It is assumed that the number of users at the edge of each cell is the same. Therefore, to overcome such limitations of PLUG algorithm, we propose an improved PLUG (IPLUG) algorithm which provides the decision parameters for user grouping and selects the number of central and edge users in each cell in a dynamic manner. Thus, the algorithm prevents the wrong division of users in good channel conditions being considered as an edge user which causes large pilot overhead, and also identifies the users with worst channel conditions and prevents the wrong division of such users from the center user group. The second algorithm for pilot decontamination utilizes the idea of pseudo-random codes in which orthogonal pilot are assigned to different cells. Such codes are deployed to get a transmission pilot by scrambling the user pilot in the cell. Since the pilot contamination is generated because different cells multiplex the same set of orthogonal pilots and the pseudo-random sequences have good cross-correlation characteristics, this paper uses this feature to improve the orthogonality of pilots between different cells. Simulation results show that the proposed algorithms can effectively improve channel estimation performance and achievable rate as compared with other schemes.

scholarly journals Pilot Decontamination Using Asynchronous Fractional Pilot Scheduling in Massive MIMO Systems

Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6213
Author(s):  
Muhammad Irshad Zahoor ◽  
Zheng Dou ◽  
Syed Bilal Hussain Shah ◽  
Imran Ullah Khan ◽  
Sikander Ayub ◽  
...  
Keyword(s):  
Massive Mimo ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Ideal Number ◽  
Sum Rate ◽  
Inter Cell Interference ◽  
Time Division

Due to large spectral efficiency and low power consumption, the Massive Multiple-Input-Multiple-Output (MIMO) became a promising technology for the 5G system. However, pilot contamination (PC) limits the performance of massive MIMO systems. Therefore, two pilot scheduling schemes (i.e., Fractional Pilot Reuse (FPR) and asynchronous fractional pilot scheduling scheme (AFPS)) are proposed, which significantly mitigated the PC in the uplink time division duplex (TDD) massive MIMO system. In the FPR scheme, all the users are distributed into the central cell and edge cell users depending upon their signal to interference plus noise ratio (SINR). Further, the capacity of central and edge users is derived in terms of sum-rate, and the ideal number of the pilot is calculated which significantly maximized the sum rate. In the proposed AFPS scheme, the users are grouped into central users and edge users depending upon the interference they receive. The central users are assigned the same set of pilots because these users are less affected by interference, while the edge users are assigned the orthogonal pilots because these users are severely affected by interference. Consequently, the pilot overhead is reduced and inter-cell interference (ICI) is minimized. Further, results verify that the proposed schemes outperform the previous proposed traditional schemes, in terms of improved sum rates.

scholarly journals A Fast Adaptive Receive Antenna Selection Method in MIMO System

2013 ◽  
Vol 2013 ◽  
pp. 1-8
Author(s):  
Chaowei Wang ◽  
Weidong Wang ◽  
Cheng Wang ◽  
Shuai Wang ◽  
Yang Yu
Keyword(s):  
Mimo Systems ◽  
Antenna Selection ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
System Capacity ◽  
Adaptive Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Hardware Costs ◽  
Receive Antenna

Antenna selection has been regarded as an effective method to acquire the diversity benefits of multiple antennas while potentially reduce hardware costs. This paper focuses on receive antenna selection. According to the proportion between the numbers of total receive antennas and selected antennas and the influence of each antenna on system capacity, we propose a fast adaptive antenna selection algorithm for wireless multiple-input multiple-output (MIMO) systems. Mathematical analysis and numerical results show that our algorithm significantly reduces the computational complexity and memory requirement and achieves considerable system capacity gain compared with the optimal selection technique in the same time.

scholarly journals Effective Power Allocation Using for Transmit Source In MIMO Relay Communication

2021 ◽  
Vol 5 (3) ◽  
Author(s):  
Hoai Trung Tran
Keyword(s):  
Channel Capacity ◽  
Communication Systems ◽  
High Speed ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Optimization Method ◽  
Radio Communication ◽  
Second Derivatives ◽  
Multiple Input ◽  
Input Multiple Output

The Multiple Input Multiple Output (MIMO) systems using relays are of interest for high-speed radio communication systems. Currently, most of the articles are interested in the model of three nodes with purposes such as increasing the channel capacities (mutual information) or reducing the minimum mean square of error. This paper extends to more than one relay and is concerned with the maximum channel capacity. It is assumed that the channel matrices between source and relay as well as relay and receiver are random matrices; the relay precoders are also assumed to be random and known at the receiver. The article proposes that the Lagrange multiplier finding algorithm using the Newton – Raphson optimization method is more straightforward than the traditional finding algorithm using the first and second derivatives but still gives a higher channel capacity.

Sign in / Sign up

Export Citation Format

Share Document