scholarly journals Effect of N-(6-aminobenzo[d]thiazol-2-yl)benzamide and 2,6-diamino-benzothiazole as Corrosion Inhibitor in acid medium

2016 ◽  
Vol 12 (12) ◽  
pp. 4593-4613
Author(s):  
Rekha. S ◽  
Kannan. K ◽  
Gnanavel. S
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Acid Medium ◽  
Potentiodynamic Polarization ◽  
Inhibition Efficiency ◽  
Free Energy Of Adsorption ◽  
Weight Loss Method ◽  
Ft Ir ◽  
Loss Method

2-amino-6-nitrobenzothiazole(ANBT) was used as an inhibitor for the corrosion of mild steel in acid medium since the inhibition efficiency was low for that compound, 2,6-diaminobenzothiazole (DABT) and N-(6-aminobenzo [d] thiazol-2-y1) benzamide(ABTB) was synthesized,  and characterized by FT-IR, H1NMR, and C13NMR.The synthesized compound was tested as a corrosion inhibitor for mild steel in 1N HCl solution using weight loss, Potentiodynamic polarization, and AC impedance techniques. The inhibition efficiency was studied at the different time, temperature and acid concentration by weight loss method. The values of activation energy and free energy of adsorption of these compounds were also calculated, which reveals that the inhibitor was adsorbed on the mild steel by physisorption mechanism. Adsorption obeys Langmuir and Temkin adsorption isotherms. The results obtained by weight loss method revealed that the compound performed as a better inhibitor for mild steel in 1N HCl. Potentiodynamic polarization studies showed that the inhibitor acts as a mixed type inhibitor.AC impedance studies revealed that the corrosion process was controlled by charge transfer process. Surface analysis was studied using SEM and FT-IR.

scholarly journals Corrosion Inhibition of Bark Extract of Euphorbia royleana on Mild Steel in 1M HCl

2019 ◽  
Vol 40 ◽  
pp. 25-29
Author(s):  
Bishal Thapa ◽  
Dipak Kumar Gupta ◽  
Amar Prasad Yadav
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Inhibition Efficiency ◽  
Bark Extract ◽  
Potential Measurement ◽  
Maximum Inhibition ◽  
Weight Loss Method ◽  
Loss Method ◽  
Loss Experiment

The bark extract of Euphorbia royleana as a green corrosion inhibitor was studied in 1M HCl using weight-loss method and potential measurement. The results show that the bark extract of Euphorbia royleana is an effective anti-corrosion inhibitor of mild steel in acidic media. The corrosion rate decreases with the time of immersion. Weight loss experiment shows that the loss in weight decreases with the time of immersion and inhibition efficiency increases with the concentration of extract. It was observed that maximum inhibition efficiency is 99.60% in 100% concentration of extract. Potential measurement study shows that bark extracts act as a mixed type of inhibitor i.e. inhibits both anodically as well as cathodically. 

scholarly journals Newly Synthesized N-Substituted Thiosemicarbazone as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl

2019 ◽  
Vol 7 (4.14) ◽  
pp. 168
Author(s):  
N Z. Nor Hashim ◽  
K Kassim ◽  
F H. Zaidon
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Potentiodynamic Polarization ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Langmuir Adsorption ◽  
Before And After ◽  
Ft Ir ◽  
L1 And L2

Two N-substituted thiosemicarbazone derivatives namely as 2-(4-chlorobenzylidene)-N-phenylhydrazinecarbothioamide and 2-benzylidene-N-phenylhydrazinecarbothioamide (L1 and L2, respectively) have been tested as corrosion inhibitors on mild steel in 1 M HCl. The ligands were synthesized and investigated using potentiodynamic polarization (PD) and electrochemical impedance spectroscopy (EIS).  The obtained results indicated that inhibition efficiency, (IE, %) L1 increased with increasing inhibitor concentrations which behaved as a good corrosion inhibitor compared to L2. The synthesized ligands were successfully characterized by melting point, elemental analysis (C, H, N, and S), Fourier-transform infrared spectroscopy (FT-IR) and NMR (1H and 13C) spectroscopy. The excellent inhibition effectiveness for both compounds on mild steel before and after immersion in 1 M HCl solution containing 40 ppm of L1 and L2 were also verified by scanning electron microscope (SEM). Based on potentiodynamic polarization results, it can be concluded that all investigated compounds are mixed-type inhibitors and obey the Langmuir adsorption isotherm. 

scholarly journals A Comparative Study on Corrosion Inhibition of Mild Steel UsingPiper NigrumL. in Different Acid Medium

2010 ◽  
Vol 7 (3) ◽  
pp. 942-946 ◽  
Author(s):  
B. Anand ◽  
V. Balasubramanian
Keyword(s):  
Weight Loss ◽  
Hydrochloric Acid ◽  
Mild Steel ◽  
Acid Medium ◽  
Sulphuric Acid ◽  
Corrosion Inhibition ◽  
Piper Nigrum ◽  
Time Interval ◽  
Weight Loss Method ◽  
Loss Method

The inhibition of corrosion of mild steel usingPiper nigrumL in different acid medium by weight loss method was investigated. The corrosion inhibition was studied in hydrochloric acid and sulphuric acid by weight loss method at different time interval at room temperature. The result showed that the corrosion inhibition efficiency of this compound was found to vary with different time interval and different acid concentration. Also, it was found that the corrosion inhibition behavior ofPiper nigrumL is greater in sulphuric acid than hydrochloric acid. So,Piper nigrumL can be used as a good inhibitor for preventing mild steel material.

scholarly journals New Corrosion Inhibitor Derived from Coumarin

2017 ◽  
Author(s):  
Ahmed Al-Amiery
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Weight Loss ◽  
Fourier Transform ◽  
Magnetic Resonance ◽  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Damage Reduction ◽  
Weight Loss Method ◽  
Loss Method ◽  
Hcl Solution

New corrosion inhibitor derived from coumarin-3-amine namely 3-((2-chlorobenzylidene)amino)coumarin was synthesized and characterized by CHN elemental analysis in addition to Fourier transform infrared and nuclear magnetic resonance techniques. The anti-corrosion ability of 3-((2-chlorobenzylidene)amino)coumarin to inhibit the impacts of corrosion has been demonstrated and damage reduction of the mild steel also. 3-((2-chlorobenzylidene)amino)coumarin, has been employed as a good corrosion inhibitor for mild steel in HCL solution. The efficiency of the inhibition was figured according to weight loss method and it was 74.6%.

scholarly journals Natural Polymer of Iraqi Apricot Tree Gum as a Novel Corrosion Inhibitor for Mild Steel in 1 M HCl Solution

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
I. M. Alwaan ◽  
Fouad Kadhim Mahdi
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Polymer Concentration ◽  
Natural Polymer ◽  
Free Energy Of Adsorption ◽  
Adsorption Enthalpy ◽  
Enthalpy Of Adsorption ◽  
Weight Loss Method ◽  
Loss Method ◽  
Apricot Tree

Corrosion inhibition of mild steel in 1 M hydrochloric acid using Iraqi apricot tree gum Arabic as natural polymer was studied. The weight loss method was used to predict the efficiency of the inhibitor on corrosion of mild steel in a temperature range of 17–40°C. The FTIR result of natural polymer revealed that the C=O and O-H groups were found in the structure of the natural polymer. The results of weight loss method showed that the inhibition efficiency (I%) increased with the increase in both the natural polymer concentration and the temperature; therefore, chemical adsorption mechanism was suggested in this system. The different mathematical models of the adsorption isotherms were studied and the results revealed that natural polymer was found to obey Temkin, Langmuir, and Freundlich adsorption isotherm. The activation energy of adsorption, enthalpy of adsorption, and entropy of adsorption were obtained for different concentrations of natural polymer (0, 0.1, 0.2, and 0.3 g/L) and the results showed that the thermodynamic properties decreased with the loading of a natural polymer. Gibbs free energy of adsorption results was a minus value that led to the conclusion of the spontaneous adsorption of the natural polymer in this system.

Study on Corrosion Scale Inhibitor for Blast Furnace Gas TRT System

2013 ◽  
Vol 864-867 ◽  
pp. 1342-1345
Author(s):  
Fu Rong Zhou ◽  
Hu Zhang ◽  
Guang Wu Du ◽  
Wen Hua Wang
Keyword(s):  
Weight Loss ◽  
Blast Furnace ◽  
Corrosion Inhibitor ◽  
Inhibition Efficiency ◽  
Acid Anhydride ◽  
Scale Inhibitor ◽  
Corrosion Scale ◽  
Blast Furnace Gas ◽  
Weight Loss Method ◽  
Loss Method

Cyclohexylamine, morphine, ethanolamine, propiolic alcohol, seventeen alkenyl amide ethyl imidazoline, water depolymerization malaya acid anhydride, etc were chosen as the raw material of corrosion scale inhibitor in view of corrosion scaling reason and characteristic of blast furnace top gas pressure recovery turbine unit. The optimized formula of corrosion inhibitor have been obtained through orthogonal experiment. Corrosion and scale inhibitor performance were evaluated respectively by static weight-loss method, dynamic weight-loss method and calcium carbonate deposition. The results show that when these components are reasonable distributed, the corrosion effect is satisfied. When water depolymerization malaya acid anhydride is combined with the corrosion inhibitor, the corrosion and scale inhibition efficiency of composite inhibitor are more than 90%. Simulation blast furnace gas is adopted in dynamic simulation experiment, the corrosion inhibition efficiency is over 92%.

scholarly journals Coumarin-3-Amine as New Corrosion Inhibitor

2017 ◽  
Author(s):  
Ahmed Al-Amiery
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Spectroscopic Techniques ◽  
Synthetic Compounds ◽  
Weight Loss Method ◽  
Organic Inhibitors ◽  
Loss Method

Corrosion inhibitors are the natural or synthetic compounds that have the ability to inhibit the average of corrosion and reduce the damage of the mild steel. Enormous organic inhibitors nowadays employed in the corrosion domain but excluded due to costly. Comparatively cheap, and stable organic compound, namely 3-((4-nitrobenzylidene)amino)coumarin, have been utilized as an excellent corrosion inhibitor in hydrochloric acid for mild steel. The inhibition efficiency has been figured regarding to weight loss method. The corrosion inhibitor was identified according to spectroscopic techniques namely Fourier transform infrared and nuclear magnetic resonance in addition to micro-elemental analysis. Inhibition efficiency for the studied inhibitor was 71.4% that, at the highest studied concentration.

scholarly journals Glycerin-Grafted Starch as Corrosion Inhibitor of C-Mn Steel in 1 M HCl solution

2019 ◽  
Vol 9 (21) ◽  
pp. 4684 ◽  
Author(s):  
Sihem Lahrour ◽  
Abderrahim Benmoussat ◽  
Brahim Bouras ◽  
Asma Mansri ◽  
Lahcene Tannouga ◽  
...  
Keyword(s):  
Weight Loss ◽  
Corrosion Inhibitor ◽  
Potentiodynamic Polarization ◽  
Electrochemical Impedance ◽  
Corrosion Current ◽  
General Corrosion ◽  
Structural Applications ◽  
Weight Loss Method ◽  
Loss Method ◽  
Mn Steel

C-Mn steels, commonly employed in structural applications, are often exposed to near-neutral aerated environments and hence subjected to general corrosion. In broader contexts, for example during pickling, acidizing treatments, or acid-releasing processes, where steel comes in contact with more aggressive solutions, the use of corrosion inhibitors is a supplementary strategy to cathodic protection and/or coating. This work focuses on the C-Mn steel corrosion protection in the presence of HCl, either as process fluid or by product. In order to avoid the toxicological issues related to conventional synthetic products, a bio-copolymer containing glycerin-grafted starch, synthesized by modification of maize starch, was studied as a “green” corrosion inhibitor by the weight loss method and electrochemical techniques (open circuit potential, potentiodynamic polarization and electrochemical impedance spectroscopy). Corrosion-related parameters, such as inhibitor concentration and temperature, were varied and optimized to characterize the corrosion process. Results showed that inhibition efficiency increases with increasing bio-copolymer concentration, reaching a maximum of 94%at the concentration of 300 mg L−1. The kinetic and thermodynamic parameters were determined and discussed. The obtained values of corrosion potential and corrosion current density, Ecorr and icorr, obtained by potentiodynamic polarization, are in agreement with the weight loss method. The corrosion current densities decrease when the concentration of the inhibitor increases.

scholarly journals Synergistic effect of ZnO nanoparticles with organic compound as corrosion inhibition

2020 ◽  
Author(s):  
Buraq T Sh AL-Mosawi ◽  
Mohammed M Sabri ◽  
Muhanad A Ahmed
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Corrosion Process ◽  
Zno Nps ◽  
Weight Loss Method ◽  
Steel Surfaces ◽  
Loss Method ◽  
Isatin Derivative

Abstract In chemical manufactures, the corrosion inhibitors were added in order to reduce the corrosion of mild steel. Chemical molecules are often used on mild steel surfaces as portion of the latest finishing steps before painting and/or storage. Here, this work elucidated the utilization of an isatin derivative, namely, 3-((3-acetylphenyl)imino)indolin-2-one synergistic with zinc oxide nanoparticles for improving the impedance of mild steel (MS) against corrosion in 1.0 M hydrochloric acid using the weight loss method and scanning electron microscopy (SEM). Weight loss measurements demonstrated that the best 3-((3-acetylphenyl)imino)indolin-2-one concentration was 0.5 mM and the inhibition efficiency was 83% whereas the inhibition efficiency was 92% with addition of ZnO NPs. 3-((3-Acetylphenyl)imino)indolin-2-one retards the corrosion process at 300 K and demonstrates low inhibition efficiencies at 310, 320 and 330 K.

Sign in / Sign up

Export Citation Format

Share Document