scholarly journals 8 Purifying the ykkCD Mutant Toxin Sensor RNA and Evaluating its Purity Using Denaturing PAGE and UV spectrometry

Keyword(s):  
Author(s):  
Santoshkumar R. Mulik ◽  
Rishikesh S. Bachhav

Assay analytical test procedure at the Bulk-Solution stage for Esomeprazole Sodium Injection 40mgas a Critical Processing Parameters during manufacturing developed and validated. As per current available literature and the references, Esomeprazole active substance is available in market in the five forms, i.e. Esomeprazole as Plain [Tablet]; Esomeprazole Magnesium Trihydrate [Tablet, Capsule Delayed Release]; Esomeprazole Potassium [Tablet and Capsule]; Esomeprazole Strontium [Capsule Delayed Release] and Esomeprazole Sodium [Injectable].Assay test procedure for Active and other dosage forms [Tablet, Capsule] were available based on either Potentiometric Titration or HPLC basis. Product Esomeprazole Sodium Injection 40mg is not available in official pharmacopeia. As per available reference and literature assay test method for intermediate testing and finished product is based on HPLC. Intermediate testing [In-Process Testing] required as Critical Process Parameters [CPP] to ensure the quality i.e. appropriate bulk-solution purity, before to proceed for filtration and filling of Bulk-solution in unit dosage form [Vials]. To test the bulk solution purity approximate 5-6 hours required by HPLC. Which leads to hold the Bulk solution, further it impact and may risk to Bio-Burden of bulk solution. Also it impact and reduce the productivity of line by 5-6 hours. HPLC testing required special skilled manpower and cost. Considering all above concerns Study carried for test method development based on UV-Spectroscopy, HPLC and potentiometric titration. Based on method validation performed for UV-Spectrometry, HPLC and potentiometric titration; Test procedure developed and validated based on UV-Spectrometry is found Simple, Accurate, Precise, Economical and Rapid to save time and cost with increase in productivity as a Critical Processing Parameters for Esomeprazole Sodium Injection 40mgat the Bulk-Solution stage during manufacturing.


2013 ◽  
Vol 11 (9) ◽  
pp. 1533-1541 ◽  
Author(s):  
Sofia Ahmed ◽  
Muhammad Sheraz ◽  
Ceyla Yorucu ◽  
Ihtesham Rehman

AbstractAbstract The quantitative analysis of Tolfenamic Acid (TA) both as a pure compound and in tablet dosage form has been carried out using FT-IR and UV spectroscopy. In the FT-IR method, a number of characteristic absorption peaks were examined that could be used for analytical purpose. The analysis was carried out by preparing calibration curves of peak height/area versus TA content using two points baseline correction with fixed location, and the data was also analyzed through PLS regression model. In the UV method, ethanolic solutions of the drug were analyzed at 288 nm (λmax) using 480 as the value of A (1%, 1 cm) at the analytical wavelength. The results have been compared statistically for recovery, precision, accuracy and linearity with the British Pharmacopoeial titration method that showed good validity of both test procedures. The two test methods exhibited good recovery of TA with an accuracy of 99.75–100.83% and 99.53–100.11% by FTIR spectrometry for peak height and area respectively and 100.21% for UV method. However, UV spectrometry was found to be more accurate and precise on the basis of statistical evaluation and hence can be employed in the quality control of TA in pharmaceuticals as an alternative to the titration method. Graphical abstract


Science ◽  
2001 ◽  
Vol 292 (5517) ◽  
pp. 647-648
Author(s):  
S. Olsnes
Keyword(s):  

1977 ◽  
Vol 32 (5-6) ◽  
pp. 453-455 ◽  
Author(s):  
Konrad Dettner ◽  
Gerhard Schwinger

Abstract In pygidial-glands of water beetles (Dytiscidae) 3-indoleacetic acid and phenylacetic acid have been identified by mass-spectroscopical methods and estimated by UV-spectrometry.


2006 ◽  
Vol 25 (5) ◽  
pp. 409-418 ◽  
Author(s):  
Akira Takahashi ◽  
Chiyo Yamamoto ◽  
Toshio Kodama ◽  
Kanami Yamashita ◽  
Nagakatsu Harada ◽  
...  

Vibrio parahaemolyticus secretes thermostable direct hemolysin (TDH), a major virulence factor. Earlier studies report that TDH is a pore-forming toxin. However, the characteristics of pores formed by TDH in the lipid bilayer, which is permeable to small ions, remain to be elucidated. Ion channel-like activities were observed in lipid bilayers containing TDH. Three types of conductance were identified. All the channels displayed relatively low ion selectivity, and similar ion permeability. The Cl− channel inhibitors, DIDS, glybenclamide, and NPPB, did not affect the channel activity of pores formed by TDH. R7, a mutant toxin of TDH, also forms pores with channel-like activity in lipid bilayers. The ion permeability of these channels is similar to that of TDH. R7 binds cultured cells and liposomes to a lower extent, compared to TDH. R7 does not display significant hemolytic activity and cell cytotoxicity, possibly owing to the difficulty of insertion into lipid membranes. Once R7 is assembled within lipid membranes, it may assume the same structure as TDH. The authors propose that the single glycine at position 62, substituted with serine in the R7 mutant toxin, plays an important role in TDH insertion into the lipid bilayer.


Author(s):  
H. Barkemeyer

AbstractA new spectrophotometric method, suitable for routine determination of nitrate in tobacco, is described. Quantities as low as 0.05 % of nitrate in tobacco are determinable, the results can be reproduced very well (RSD (relative standard deviation) = 1.43 % for 0.7 % of nitrate in tobacco). 15-20 determinations per day and per person can be performed. The figures obtained by this method are identical with those obtained by other methods. Interferences by other compounds have not been observed. Commercial cigarettes show contents of nitrate in tobacco in the range between 2 % and 0.04 %.


Sign in / Sign up

Export Citation Format

Share Document