scholarly journals Unsteady/Steady Natural Convection Flow of Reactive Viscous Fluid in a Vertical Annulus

2013 ◽  
Vol 18 (1) ◽  
pp. 73-83 ◽  
Author(s):  
B.K. Jha ◽  
A.K. Samaila ◽  
A.O. Ajibade
Keyword(s):  
Heat Transfer ◽  
Steady State ◽  
Natural Convection ◽  
Differential Equations ◽  
Viscous Fluid ◽  
Skin Friction ◽  
Convection Flow ◽  
Natural Convection Flow ◽  
Vertical Annulus ◽  
Analytical Expressions

This paper presents both analytical and numerical analyses of a fully developed unsteady/steady natural convection flow of a reactive viscous fluid in an open ended vertical annulus. Analytical expressions for velocity, temperature, skin-friction and rate of heat transfer are obtained after simplifying and solving the governing differential equations with reasonable approximations. The interesting result found in this study is that an increase in non-dimensional time (t) , increases both temperature and velocity profiles until a steady-state value is attained. Subsequent results obtained by numerical calculations show excellent agreement with analytical results.

scholarly journals MHD natural convection flow with radiative heat transfer past an impulsively moving vertical plate with ramped temperature in the presence of hall current and thermal diffusion

2013 ◽  
Vol 18 (4) ◽  
pp. 1201-1220
Author(s):  
G.S. Seth ◽  
G.K. Mahato ◽  
S. Sarkar
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Skin Friction ◽  
Radiative Heat Transfer ◽  
Vertical Plate ◽  
Radiative Heat ◽  
Hall Current ◽  
Convection Flow ◽  
Natural Convection Flow ◽  
Flow Parameters

Abstract An investigation on an unsteady MHD natural convection flow with radiative heat transfer of a viscous, incompressible, electrically conducting and optically thick fluid past an impulsively moving vertical plate with ramped temperature in a porous medium in the presence of a Hall current and thermal diffusion is carried out. An exact solution of momentum and energy equations, under Boussinesq and Rosseland approximations, is obtained in a closed form by the Laplace transform technique for both ramped temperature and isothermal plates. Expressions for the skin friction and Nusselt number for both ramped temperature and isothermal plates are also derived. The numerical values of fluid velocity and fluid temperature are displayed graphically versus the boundary layer coordinate y for various values of pertinent flow parameters for both ramped temperature and isothermal plates. The numerical values of the skin friction due to primary and secondary flows are presented in tabular form for various values of pertinent flow parameters.

scholarly journals Effect of Temperature-Dependent Variable Viscosity on Magnetohydrodynamic Natural Convection Flow along a Vertical Wavy Surface

2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
Nazma Parveen ◽  
Md. Abdul Alim
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Variable Viscosity ◽  
Skin Friction Coefficient ◽  
Effect Of Temperature ◽  
Convection Flow ◽  
Temperature Dependent ◽  
Natural Convection Flow

The effect of temperature dependent variable viscosity on magnetohydrodynamic (MHD) natural convection flow of viscous incompressible fluid along a uniformly heated vertical wavy surface has been investigated. The governing boundary layer equations are first transformed into a nondimensional form using suitable set of dimensionless variables. The resulting nonlinear system of partial differential equations are mapped into the domain of a vertical flat plate and then solved numerically employing the implicit finite difference method, known as Keller-box scheme. The numerical results of the surface shear stress in terms of skin friction coefficient and the rate of heat transfer in terms of local Nusselt number, the stream lines and the isotherms are shown graphically for a selection of parameters set consisting of viscosity parameter (), magnetic parameter (), and Prandtl number (Pr). Numerical results of the local skin friction coefficient and the rate of heat transfer for different values are also presented in tabular form.

scholarly journals MHD natural convection flow of Casson fluid in an annular microchannel containing porous medium with heat generation/absorption

2020 ◽  
Vol 9 (1) ◽  
pp. 223-232 ◽  
Author(s):  
B.J. Gireesha ◽  
S. Sindhu
Keyword(s):  
Porous Medium ◽  
Natural Convection ◽  
Skin Friction ◽  
Interaction Parameter ◽  
Heat Generation ◽  
Velocity Slip ◽  
Casson Fluid ◽  
Convection Flow ◽  
Natural Convection Flow ◽  
Wall Interaction

AbstractThis study has been conducted to focus on natural convection flow of Casson fluid through an annular microchannel formed by two cylinders in the presence of magnetic field. The process of heat generation/absorption is taken into consideration. Combined effects of various parameters such as porous medium, velocity slip and temperature jump are considered. Solution of the present mathematical model is obtained numerically using fourth-fifth order Runge-Kutta-Fehlberg method. The flow velocity, thermal field, skin friction and Nusselt number are scrutinized with respect to the involved parameters of interest such as fluid wall interaction parameter, rarefaction parameter, Casson parameter and Darcy number with the aid of graphs. It is established that higher values of Casson parameter increases the skin friction coefficient. Further it is obtained that rate of heat transfer diminishes as fluid wall interaction parameter increases.

Transient Natural Convection Between Two Zones in an Insulated Enclosure

1988 ◽  
Vol 110 (1) ◽  
pp. 116-125 ◽  
Author(s):  
P. A. Litsek ◽  
A. Bejan
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Experiments ◽  
Thermal Stratification ◽  
Convection Flow ◽  
Natural Convection Flow ◽  
Flow And Heat Transfer ◽  
Vertical Opening ◽  
The Right ◽  
Rayleigh Numbers

The natural convection flow and heat transfer between two enclosures that communicate through a vertical opening is studied by considering the evolution of an enclosed fluid in which the left half is originally at a different temperature than the right half. Numerical experiments show that at sufficiently high Rayleigh numbers the ensuing flow is oscillatory. This and other features are anticipated on the basis of scale analysis. The time scales of the oscillation, the establishment of thermal stratification, and eventual thermal equilibrium are determined and tested numerically. At sufficiently high Rayleigh numbers the heat transfer between the communicating zones is by convection, in accordance with the constant-Stanton-number trend pointed out by Jones and Otis (1986). The range covered by the numerical experiments is 102 < Ra < 107, 0.71 < Pr < 100, and 0.25 < H/L < 1.

Natural convection flow in a vertical micro-annulus with time-periodic thermal boundary conditions

2018 ◽  
Vol 14 (5) ◽  
pp. 1064-1081
Author(s):  
Basant Kumar Jha ◽  
Michael O. Oni
Keyword(s):  
Nusselt Number ◽  
Natural Convection ◽  
Boundary Conditions ◽  
Skin Friction ◽  
Convection Flow ◽  
Natural Convection Flow ◽  
Content Type ◽  
Thermal Boundary Conditions ◽  
The Impact ◽  
Time Periodic

PurposeThe purpose of this paper is to investigate the impact of time-periodic thermal boundary conditions on natural convection flow in a vertical micro-annulus.Design/methodology/approachAnalytical solution in terms of Bessel’s function and modified Bessel’s function of order 0 and 1 is obtained for velocity, temperature, Nusselt number, skin friction and mass flow rate.FindingsIt is established that the role of Knudsen number and fluid–wall interaction parameter is to decrease fluid temperature, velocity, Nusselt number and skin friction.Research limitations/implicationsNo laboratory practical or experiment was conducted.Practical implicationsCooling device in electronic panels, card and micro-chips is frequently cooled by natural convection.Originality/valueIn view of the amount of works done on natural convection in microchannel, it becomes interesting to investigate the effect that time-periodic heating has on natural convection flow in a vertical micro-annulus. The purpose of this paper is to examine the impact of time-periodic thermal boundary conditions on natural convection flow in a vertical micro-annulus.

Numerical Simulation of Natural Convection Flow in a Cube With a Horizontal Heated Strip

2008 ◽  
Author(s):  
Esam M. Alawadhi
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Nusselt Number ◽  
High Temperature ◽  
Natural Convection ◽  
Vertical Wall ◽  
Convection Flow ◽  
Front Wall ◽  
Natural Convection Flow ◽  
Rayleigh Numbers

Natural convection flow in a cube with a heated strip is solved numerically. The heated strip is attached horizontally to the front wall and maintained at high temperature, while the entire opposite wall is maintained at low temperature. The heated strip simulates an array of electronic chips The Rayleigh numbers of 104, 105, and 106 are considered in the analysis and the heated strip is horizontally attached to the wall. The results indicate that the heat transfer strongly depends on the position of the heated strip. The maximum Nusselt number can be achieved if the heater is placed at the lower half of the vertical wall. Increasing the Rayleigh number significantly promotes heat transfer in the enclosure. Flow streamlines and temperature contours are presented, and the results are validated against published works.

Sign in / Sign up

Export Citation Format

Share Document