scholarly journals Synthesis, photophysical properties and electrochemical polymerization of a new blue fluorescent compound based on 3,4-ethylenedioxythiophene moiety

2020 ◽  
Vol 38 (1) ◽  
pp. 151-158
Author(s):  
Mounia Guergouri ◽  
Rafik Bensegueni ◽  
Leïla Bencharif
Keyword(s):  
Molecular Orbital ◽  
Photoelectron Spectroscopy ◽  
Electrochemical Polymerization ◽  
Photophysical Properties ◽  
Energy Levels ◽  
Cyclic Voltammograms ◽  
Fluorescent Compound ◽  
Vis Spectroscopy ◽  
Lowest Unoccupied Molecular Orbital ◽  
Photovoltaic Solar Cells

AbstractNew monomer, 4,4’-[(2,3-dihydrothieno[3,4-b][1,4]diorin-5-yl)vinyl]-1,1’-biphenyl (BPE), was synthesized, characterized and polymerized electrochemically via a potentiostatic method. The corresponding polymer poly(4,4’-[(2,3-dihydrothieno[3,4-b][1,4] diorin-5-yl)vinyl]-1,1’-biphenyl) (PBPE) obtained as a thin-layer film, was characterized by cyclic voltammetry, X-ray photoelectron spectroscopy, infrared spectroscopy and UV-Vis spectroscopy. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of the obtained polymer were determined from cyclic voltammograms as –4.89 eV and –3.81 eV, respectively. Its optical and electrochemical band gaps were calculated, and found to be 1.08 eV and 1.49 eV, respectively. PBPE can be used as a donor material in bilayer organic photovoltaic solar cells having PCBM as acceptor material.

Synthesis, crystal structure and photophysical properties of 1,4-bis(1,3-diazaazulen-2-yl)benzene: a new π building block

2018 ◽  
Vol 74 (2) ◽  
pp. 171-176
Author(s):  
Peili Sun ◽  
Zongyao Zhang ◽  
Hongxia Luo ◽  
Pu Zhang ◽  
Yujun Qin ◽  
...  
Keyword(s):  
Molecular Orbital ◽  
Building Block ◽  
Photophysical Properties ◽  
Condensation Reaction ◽  
Energy Levels ◽  
Three Dimensional ◽  
Experimental Result ◽  
Monoclinic System ◽  
H Nmr ◽  
Lowest Unoccupied Molecular Orbital

A dimerized 1,3-diazaazulene derivative, namely 1,4-bis(1,3-diazaazulen-2-yl)benzene [or 2,2′-(1,4-phenylene)bis(1,3-diazaazulene)], C22H14N4, (I), has been synthesized successfully through the condensation reaction between 2-methoxytropone and benzene-1,4-dicarboximidamide hydrochloride, and was characterized by 1H NMR and 13C NMR spectroscopies, and ESI–MS. X-ray diffraction analysis reveals that (I) has a nearly planar structure with good π-electron delocalization, indicating that it might serve as a π building block. The crystal belongs to the monoclinic system. One-dimensional chains were formed along the a axis through π–π interactions and adjacent chains are stabilized by C—H...N interactions, forming a three-dimensional architecture. The solid emission of (I) in the crystalline form exhibited a 170 nm red shift compared with that in the solution state. The observed optical bandgap for (I) is 3.22 eV and a cyclic voltammetry experiment confirmed the energy levels of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO). The calculated bandgap for (I) is 3.37 eV, which is very close to the experimental result. In addition, the polarizability and hyperpolarizability of (I) were appraised for its further application in second-order nonlinear optical materials.

scholarly journals Emphasizing the Operational Role of a Novel Graphene-Based Ink into High Performance Ternary Organic Solar Cells

2019 ◽  
Author(s):  
Minas M. Stylianakis ◽  
Dimitriοs M. Kosmidis ◽  
Katerina Anagnostou ◽  
Christos Polyzoidis ◽  
Miron Krassas ◽  
...  
Keyword(s):  
Solar Cells ◽  
Molecular Orbital ◽  
Organic Solar Cells ◽  
High Performance ◽  
Energy Levels ◽  
Fullerene Derivative ◽  
Highest Occupied Molecular Orbital ◽  
Lowest Unoccupied Molecular Orbital ◽  
Synthetic Routes

A novel solution-processed graphene-based material was synthesized by treating graphene oxide (GO) with 2,5,7-trinitro-9-oxo-fluorenone-4-carboxylic acid (TNF-COOH) moieties, via simple synthetic routes. The yielded molecule N-[(carbamoyl-GO)ethyl]-N’-[(carbamoyl)-(2,5,7-trinitro-9-oxo-fluorene)] (GO-TNF) was thoroughly characterized and it was shown that it presents favorable highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels to function as a bridge component between the polymeric donor poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno[3,4-b]thiophenediyl}) (PTB7) and the fullerene derivative acceptor [6,6]-phenyl-C71-butyric-acid-methylester (PC71BM). In this context, a GO-TNF based ink was prepared and directly incorporated within the binary photoactive layer, in different volume ratios (1-3% ratio to the blend), for the effective realization of inverted ternary organic solar cells (OSCs) of the structure ITO/PFN/PTB7:GO-TNF:PC71BM/MoO3/Al. The addition of 2% v/v GO-TNF ink led to a champion power conversion efficiency (PCE) of 8.71% that was enhanced by ~13% as compared to the reference cell.

scholarly journals Molecular-level architectural design using benzothiadiazole-based polymers for photovoltaic applications

2017 ◽  
Vol 13 ◽  
pp. 863-873 ◽  
Author(s):  
Vinila N Viswanathan ◽  
Arun D Rao ◽  
Upendra K Pandey ◽  
Arul Varman Kesavan ◽  
Praveen C Ramamurthy
Keyword(s):  
Molecular Orbital ◽  
Architectural Design ◽  
Density Functional ◽  
Short Circuit ◽  
Energy Levels ◽  
Photovoltaic Performance ◽  
Hole Mobility ◽  
Short Circuit Current ◽  
Open Circuit ◽  
Lowest Unoccupied Molecular Orbital

A series of low band gap, planar conjugated polymers, P1 (PFDTBT), P2 (PFDTDFBT) and P3 (PFDTTBT), based on fluorene and benzothiadiazole, was synthesized. The effect of fluorine substitution and fused aromatic spacers on the optoelectronic and photovoltaic performance was studied. The polymer, derived from dithienylated benzothiodiazole and fluorene, P1, exhibited a highest occupied molecular orbital (HOMO) energy level at −5.48 eV. Density functional theory (DFT) studies as well as experimental measurements suggested that upon substitution of the acceptor with fluorine, both the HOMO and lowest unoccupied molecular orbital (LUMO) energy levels of the resulting polymer, P2, were lowered, leading to a higher open circuit voltage and short circuit current with an overall improvement of more than 110% for the photovoltaic devices. Moreover, a decrease in the torsion angle between the units was also observed for the fluorinated polymer P2 due to the enhanced electrostatic interaction between the fluorine substituents and sulfur atoms, leading to a high hole mobility. The use of a fused π-bridge in polymer P3 for the enhancement of the planarity as compared to the P1 backbone was also studied. This enhanced planarity led to the highest observed mobility among the reported three polymers as well as to an improvement in the device efficiency by more than 40% for P3.

Computational Study on Triphenylamine-Based Dyes Containing Benzimidazole Units for Dye-Sensitized Solar Cells

2013 ◽  
Vol 668 ◽  
pp. 110-114
Author(s):  
Zhong Quan Wan ◽  
Lin Lei Zhou ◽  
Chun Yang Jia ◽  
Xiao Jun Yao ◽  
Yu Shi
Keyword(s):  
Absorption Spectra ◽  
Molecular Orbital ◽  
High Efficiency ◽  
Computational Study ◽  
Electronic Absorption Spectra ◽  
Energy Levels ◽  
Dye Sensitized Solar Cells ◽  
Conduction Band Edge ◽  
Tio2 Electrode ◽  
Lowest Unoccupied Molecular Orbital

Three novel dyes (D1, D2 and D3) containing triphenylamine (TPA) unit as core and bearing different benzimidazole units as secondary electron-donors are designed. The geometries, electronic structures, and electronic absorption spectra of these dyes are studied by DFT and TD-DFT. The optimized results indicate that these dyes are all non-coplanar, which can help to inhibit the close intermolecular π-π stacking aggregation effectively. The lowest unoccupied molecular orbital (LUMO) energy levels of the dyes are higher than the conduction band edge of the TiO2, which ensures a high efficiency of electron transfer from these dyes to TiO2 electrode. As the highest occupied molecular orbital (HOMO) energy levels of these dyes are lower than those of I-/I-3, these molecules that lose electrons could be restored by getting electrons from electrolyte. The absorption spectra of these dyes are simulated, and the calculated results indicate that D3 can absorb more photons than those of D1, D2 and TPAR in the region from 250 to 580 nm, which should have the best performance of photo-to-electric conversion efficiency.

Experimental and Theoretical Studies of 2- (naphthalen-1-yl (piperidin-1-yl) methyl)phenol Compound

2020 ◽  
Vol 42 (6) ◽  
pp. 818-818
Author(s):  
Yeliz Ula Yeliz Ula
Keyword(s):  
Molecular Orbital ◽  
Theoretical Data ◽  
Biologically Active ◽  
Oscillator Strengths ◽  
Excitation Energies ◽  
Petasis Reaction ◽  
Vis Spectroscopy ◽  
Phenol Compound ◽  
Lowest Unoccupied Molecular Orbital ◽  
Experimental Values

The 2- (naphthalen-1-yl (piperidin-1-yl) methyl) phenol compound is an alkylaminophenol compound and has been experimentally synthesized by the Petasis reaction. In this study Structural analysis was carried out by FT-IR, NMR, UV-Vis spectroscopy. The high antioxidant value of the compound showed that it could be a potential biologically active drug. Theoretical data support all experimental analysis of the new compound. Comparisons were made by double method. For this purpose, DFT (B3LYP) and HF methods have been used with 6-311G ++ (d, p) set. Also, the compoundand#39;s electronic and structural properties (bond lengths, bond angles and dihedral angles), the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energies, electrostatic potential (MEP), vibrational frequencies, Mulliken atomic charges, excitation energies, and oscillator strengths were calculated. As a result; the theoretical and experimental values were found to be compatible.

Cross-conjugation as a Motif for Organic Non-Linear Optical Molecules

2014 ◽  
Vol 1698 ◽  
Author(s):  
Meghana Rawal ◽  
Kerry Garrett ◽  
Andreas F. Tillack ◽  
Werner Kaminsky ◽  
Evgheni Jucov ◽  
...  
Keyword(s):  
Molecular Orbital ◽  
Density Functional ◽  
Dipole Moments ◽  
X Ray Diffraction ◽  
Conjugated Molecules ◽  
Functional Theory ◽  
Highest Occupied Molecular Orbital ◽  
Donor And Acceptor ◽  
Vis Spectroscopy ◽  
Lowest Unoccupied Molecular Orbital

ABSTRACTWe studied the effect of a cross-conjugated bridging group (χC) on charge-transfer in a push-pull chromophore system. The hyperpolarizability of such molecules was found to be comparable to that of a fully π-conjugated molecule (πC) with the same donor and acceptor. The cross-conjugated moiety was then applied as a pendant to a fully π-conjugated chromophore containing a tricyanopyrroline acceptor (TCP). The addition of a χC moiety did not alter the intrinsic hyperpolarizability and provides an avenue for extending and aiding πC systems. The molecules were examined by X-ray diffraction (XRD), hyper-Raleigh scattering (HRS) and UV-visible (UV-vis) spectroscopy. Experimental results were compared with the predictions of density functional theory (DFT). Cross-conjugated molecules have comparable β values, relative to πC molecules, due to reduced spatial overlap between the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO). Thus, the χC architecture could facilitate independent modification of donor and acceptor strengths while minimizing unfavorable effects on electronic transitions and dipole moments.

scholarly journals Photophysical and Electrocatalytic Properties of Rhenium(I) Triazole-Based Complexes

Inorganics ◽  
2020 ◽  
Vol 8 (3) ◽  
pp. 22
Author(s):  
Adrian Comia ◽  
Luke Charalambou ◽  
Salem A. E. Omar ◽  
Paul A. Scattergood ◽  
Paul I. P. Elliott ◽  
...  
Keyword(s):  
Molecular Orbital ◽  
Energy Gap ◽  
Cyclic Voltammograms ◽  
Reduction Wave ◽  
Peak Potential ◽  
Diimine Ligands ◽  
Highest Occupied Molecular Orbital ◽  
Catalytic Wave ◽  
Ligand Charge Transfer ◽  
Lowest Unoccupied Molecular Orbital

A series of [Re(N^N)(CO)3(Cl)] (N^N = diimine) complexes based on 4-(pyrid-2-yl)-1,2,3-triazole (1), 1-benzyl-4-(pyrimidin-2-yl)-1,2,3-triazole (2), and 1-benzyl-4-(pyrazin-2-yl)-1,2,3-triazole (3) diimine ligands were prepared and their photophysical and electrochemical properties were characterized. The ligand-based reduction wave is shown to be highly sensitive to the nature of the triazole-based ligand, with the peak potential shifting by up to 600 mV toward more positive potential from 1 to 3. All three complexes are phosphorescent in solution at room temperature with λmax ranging from 540 nm (1) to 638 nm (3). Interestingly, the complexes appear to show inverted energy-gap law behaviour (τ = 43 ns for 1 versus 92 ns for 3), which is tentatively interpreted as reduced thermal accessibility of metal-centred (3MC) states from photoexcited metal to ligand charge transfer (3MLCT) states upon stabilisation of the N^N-centred lowest unoccupied molecular orbital (LUMO). The photophysical characterisation, supported by computational data, demonstrated a progressive stabilization of the LUMO from complex 1 to 3, which results in a narrowing of the HOMO–LUMO energy gap (HOMO = highest occupied molecular orbital) across the series and, correspondingly, red-shifted electronic absorption and photoluminescence spectra. The two complexes bearing pyridyl (1) and pyrimidyl (2) moieties, respectively, showed a modest ability to catalyse the electroreduction of CO2, with a peak potential at ca. −2.3 V versus Fc/Fc+. The catalytic wave that is observed in the cyclic voltammograms is slightly enhanced by the addition of water as a proton source.

scholarly journals Mechanosynthesis of Photochromic Oligophenyleneimines: Optical, Electrochemical and Theoretical Studies

Molecules ◽  
2019 ◽  
Vol 24 (5) ◽  
pp. 849 ◽  
Author(s):  
Miguel Amado-Briseño ◽  
Luis Zárate-Hernández ◽  
Karina Alemán-Ayala ◽  
Oscar Coreño Alonso ◽  
Julián Cruz-Borbolla ◽  
...  
Keyword(s):  
Molecular Orbital ◽  
Organic Semiconductors ◽  
Density Functional ◽  
Chloroform Solution ◽  
Photochromic Properties ◽  
Highest Occupied Molecular Orbital ◽  
Vis Spectroscopy ◽  
Structural And Electronic Properties ◽  
Lowest Unoccupied Molecular Orbital ◽  
Ft Ir

In this work, two oligophenyleneimines type pentamers with terminal aldehydes, designated as DAFCHO (4,4′-((((((2,5-bis(octyloxy)-1,4-phenylene)bis(methanylylidene))bis(azanyl ylidene))bis(9H-fluorene-7,2-diyl))bis(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy) benzaldehyde)) and FDACHO (4,4′-((((((2,5-bis(octyloxy)-1,4-phenylene)bis(methanylylidene))bis (azanylylidene))bis(4,1-phenylene))bis(azanylylidene))bis(methanylylidene))bis(2,5-bis(octyloxy) benzaldehyde)) were synthesized by mechanochemistry method using 2,5-bis(octyloxy) terephtal aldehyde and 2,7-diaminofluorene or 1,4-phenylenediamine. All compounds were spectroscopically characterized using 1H and 13C-NMR, FT-IR and mass spectrometry MALDITOF. The optical properties of the compounds were analyzed by UV-vis spectroscopy using different solvents. We observed that DAFCHO and FDACHO exhibit interesting photochromic properties when they are dissolved in chloroform and exposed to sunlight for 3, 5 and 10 min. The value of the energy band gap was calculated from the absorption spectra without irradiation Egap(optical). It was 2.50 eV for DAFCHO in chloroform solution, and it decreased to 2.34 eV when it is in films. For FDACHO, it was 2.41 eV in solution and 2.27 eV in film. HOMO (Highest Occupied Molecular Orbital), LUMO (Lowest Unoccupied Molecular Orbital) and Egap(electrochemical) values were obtained by electrochemical studies. The results indicate that the compounds can be considered as organic semiconductors since their values are 2.35 eV for DAFCHO and 2.06 eV for FDACHO. The structural and electronic properties of the compounds were corroborated with a DFT (Density Functional Theory) study.

Sign in / Sign up

Export Citation Format

Share Document