The aim of this study was to explore the effect of sowing methods and deficit irrigation on weed dynamics, yield and water-use efficiency (WUE) of the maize–cowpea system during the summer and monsoon seasons, respectively. The field experiment was carried out for two years (2015 and 2016) using a split design with three replicates under irrigated (maize) and rainfed (cowpea) conditions on vertisols of a semi-arid region. Treatments included three sowing methods [i.e., broad bed and furrow (BBF), corrugated furrow (CF) and ridges and furrow (RF)] and four irrigation levels [i.e., irrigation once in 10 days (I10D), irrigation at 40% (I40), at 50% (I50) and at 60% (I60) depletion]. The results indicated that, regardless of weed flora (monocots, dicots and sedges), the RF method produced higher weed density (2.09–2.98 No. m−2) compared to CF (2.00–2.80 No. m−2) and BBF (1.85–2.64 No. m−2) in maize at 30 and 60 days after sowing (DAS). The RF method with irrigation at I40 and I50 recorded significantly higher weed density, followed by the CF and BBF method. A similar trend was also observed with dry weight of weeds (monocot; 24.19%, dicot; 25.52%, and sedges; 29.80%) in maize at 30 and 60 DAS. Higher weed density and dry weight of weeds in the RF method with I40 was due to higher soil moisture availability and higher nutrient uptake due to larger lateral wetting of the soil and greater water use (29.27%). However, the BBF method favoured the growth of weeds (9.33–16.60%) in cowpea at 55 DAS and coped under rain-fed situation over CF and RF. The CF with moderate depletion (I50) method produced significantly higher maize equivalent yield (MEY) of cowpea (10,000 kg ha−1) with considerable reduction in the total water usage (19.33%). Therefore, under a water scarcity situation, growers can practice CF and I50 for higher yield and WUE of maize–cowpea sequence cropping.
Effects of deficit irrigation on yield and water use of grown cucumbers in Saudi Arabia
