MODEL DATA BASED ESTIMATION OF THE ROCK MASS STABILITY UNDER THE INDUSTRIAL SITE OBJECTS OF THE KOVDOR OPEN PIT WHILE DEEPENING IT

Author(s):  
A.A. Kozyrev ◽  
I.M. Avetisyan ◽  
I.E. Semenova
2021 ◽  
pp. 48-53
Author(s):  
I. V. Zyryanov ◽  
A. N. Akishev ◽  
I. B. Bokiy ◽  
N. M. Sherstyuk

A specific feature of open pit mining of diamond deposits in Western Yakutia is the construction of the open pits in the zone of negative ambient temperatures, which includes thick permafrost rock mass, and which is at the same time complicated by the influence of cryogenic processes on deformation of pit wall benches. The paper presents the comparative analysis of strength characteristics in frozen and thawed rocks, stability of benches during mining, the general geomechanical approach to the determination of parameters of non-mining walls of the ultra-deep open pit diamond mines, and the parameters of nonmining walls and benches. Optimization of open pit wall configuration should primarily be based on the maximum utilization of the strength properties of frozen rocks in combination with the development of new approaches, calculation schemes and methods for assessing stability of open pit walls and benches of unconventional design, including the non-mining vertical benches. The main design characteristic that determines the parameters of open pit walls is the structural tectonic relaxation coefficient, which specifies the calculated value of cohesion in rock mass. For the diamond deposits, the values of the structural relaxation coefficient were obtained in a series of field tests and back calculations. Full-scale tests were carried out both during exploration operations in underground mines and in open pits. The accuracy of determining the values of the structural relaxation coefficient in the range of 0.085–0.11 is confirmed by the parameters of non-mining walls in an open pit mine 385–640 m deep, with overall slope angles of 38–55° and a steeper H 0.35–0.5 lower part having the slope angle of up to 70° with average strength characteristics of 7.85–11.84 MPa and the internal friction angle of 28.1–37.4°. Using the natural load-bearing capacity of rock mass to the full advantage, which the values of the structural relaxation coefficient of deposits show, allows optimization of open pit wall slope design and minimization of stripping operations.


2002 ◽  
pp. 253-262 ◽  
Author(s):  
Kunifumi TAKEUCHI ◽  
Tomoyuki SHIMURA ◽  
Shinichi AKUTAGAWA ◽  
Shunsuke SAKURAI

2018 ◽  
Vol 41 ◽  
pp. 01007
Author(s):  
Yuriy Kutepov ◽  
Aleksandr Mironov ◽  
Maksim Sablin ◽  
Elena Borger

This article considers mining and geological conditions of the site “Blagodatny” of the mine named after A.D. Ruban located underneaththe old open pit coal mine and the hydraulic-mine dump. The potentially dangerous zones in the undermined rock mass have been identified based onthe conditions of formation of water inflow into mine workings. Safe depthof coal seams mining has been calculated depending on the type of water body – the hydraulic-mine dump.


Mathematics ◽  
2021 ◽  
Vol 9 (21) ◽  
pp. 2807
Author(s):  
Shan Yang ◽  
Zitong Xu ◽  
Kaijun Su

The slope stability in an open-pit mine is closely related to the production safety and economic benefit of the mine. As a result of the increase in the number and scale of mine slopes, slope instability is frequently encountered in mines. Therefore, it is of scientific and social significance to strengthen the study of the stability of the slope rock mass. To accurately classify the stability of the slope rock mass in an open-pit mine, a new stability evaluation model of the slope rock mass was established based on variable weight and matter–element extension theory. First, based on the main evaluation indexes of geology, the environment, and engineering, the stability evaluation index system of the slope rock mass was constructed using the corresponding classification criteria of the evaluation index. Second, the constant weight of the evaluation index value was calculated using extremum entropy theory, and variable weight theory was used to optimize the constant weight to obtain the variable weight of the evaluation index value. Based on matter–element extension theory, the comprehensive correlation between the upper and lower limit indexes in the classification criteria and each classification was calculated, in addition to the comprehensive correlation between the rock mass indexes and the stability grade of each slope. Finally, the grade variable method was used to calculate the grade variable interval corresponding to the classification criteria of the evaluation index and the grade variable value of each slope rock mass, so as to determine the stability grade of the slope rock. The comparison results showed that the classification results of the proposed model are in line with engineering practice, and more accurate than those of the hierarchical-extension model and the multi-level unascertained measure-set pair analysis model.


2014 ◽  
Vol 1079-1080 ◽  
pp. 266-271
Author(s):  
Wen Hui Tan ◽  
Zhong Hua Sun ◽  
Ning Li ◽  
Xiao Hong Jiang

The lithology of rock mass isnon-homogeneity,anisotropy, andexists size effect. The mechanical parameters of rock mass gotten by engineeringapproaches cannot reflect these properties. Therefore, a newmethod of determining the mechanical parameters of jointed rock mass isproposed: gneiss in Shuichang open-pit mine was selected as a case, thefracture system of the rock mass was measured and analyzed by non-contactmeasuring system of 3GSM and probabilisticmethod,the probability distributions of geometry parameters were analyzed and a 3Djoint geometry model was made by using the program of 3D network modeling.Cubes with different sizes were selected to be tested by tri-axial compressionof numerical simulation with 3DEC based on the 3D network model of joints,thus, the REV and its mechanical parameters were determined, which providedcredible parameters for slope stability analysis.


Sign in / Sign up

Export Citation Format

Share Document