Experimental study of electron transpiration cooling with a 2-kW laser heating system

2022 ◽  
Author(s):  
Junhwi Bak ◽  
Anuj Rekhy ◽  
Christopher Limbach ◽  
Richard B. Miles ◽  
James Creel
Author(s):  
Vijayakumar Rajendran ◽  
Harichandran Ramasubbu ◽  
Karthick Alagar ◽  
Vignesh Kumar Ramalingam

An experimental study has been carried out to enhance a solar air heater’s performance by integrating artificial roughness through baffles on the absorber plate. In this paper, the thermal and energy matrices analysis of a Solar Air Heater (SAH) roughened with V up perforated baffles have been investigated. The effect of various mass flow rates on the SAH was analyzed with and without baffles. Experimental outputs like outlet air temperature, useful energy (heat) gain and thermal efficiency were evaluated to confirm the performance improvement. The baffled absorber plate SAH was found to give the maximum thermal efficiency and useful energy gain of 89.3% and 1321.37 W at a mass flow rate of 0.0346 kg/s, 13% and 12% higher than SAH without baffle. This result showed that the V up-shaped ribs in flow arrangement provide better thermal performance than smooth plate SAH for the parameter investigated. Energy matrices analysis and carbon dioxide mitigation of the SAH system were also analyzed.


2020 ◽  
Vol 161 ◽  
pp. 112072
Author(s):  
Ji Hwan Lim ◽  
Min Gyu Park ◽  
Hun Gyo Oh ◽  
Don Koan Hwang ◽  
Gi Cheol Lee ◽  
...  

Energy ◽  
2021 ◽  
pp. 122555
Author(s):  
Wei Liao ◽  
Yimo Luo ◽  
Jinqing Peng ◽  
Dengjia Wang ◽  
Chenzhang Yuan ◽  
...  

2021 ◽  
Vol 28 (6) ◽  
Author(s):  
Zuzana Konôpková ◽  
Wolfgang Morgenroth ◽  
Rachel Husband ◽  
Nico Giordano ◽  
Anna Pakhomova ◽  
...  

A laser heating system for samples confined in diamond anvil cells paired with in situ X-ray diffraction measurements at the Extreme Conditions Beamline of PETRA III is presented. The system features two independent laser configurations (on-axis and off-axis of the X-ray path) allowing for a broad range of experiments using different designs of diamond anvil cells. The power of the continuous laser source can be modulated for use in various pulsed laser heating or flash heating applications. An example of such an application is illustrated here on the melting curve of iron at megabar pressures. The optical path of the spectroradiometry measurements is simulated with ray-tracing methods in order to assess the level of present aberrations in the system and the results are compared with other systems, that are using simpler lens optics. Based on the ray-tracing the choice of the first achromatic lens and other aspects for accurate temperature measurements are evaluated.


Sign in / Sign up

Export Citation Format

Share Document