scholarly journals Surface Modification of Electrical Discharge Machined Surfaces by CO2 Laser

1998 ◽  
Vol 3 (0) ◽  
pp. 47-52 ◽  
Keyword(s):  
Surface Modification ◽  
Electrical Discharge ◽  
Machined Surfaces

scholarly journals Self-Consolidation and Surface Modification of Mechanical Alloyed Ti-25.0 at.% Al Powder Mixture by Using an Electro-Discharge Technique

2017 ◽  
Vol 62 (2) ◽  
pp. 1293-1297 ◽  
Author(s):  
S.Y. Chang ◽  
H.S. Jang ◽  
Y.H. Yoon ◽  
Y.H. Kim ◽  
J.Y. Kim ◽  
...  
Keyword(s):  
Surface Modification ◽  
Diffusion Process ◽  
Powder Mixture ◽  
Electrical Discharge ◽  
External Pressure ◽  
Solid Core ◽  
Input Energy ◽  
Electrical Discharges ◽  
Al Powder ◽  
Solid Bulk

AbstractElectrical discharges using a capacitance of 450 μF at 0.5, 1.0, and 1.5 kJ input energies were applied in a N2atmosphere to obtain the mechanical alloyed Ti3Al powder without applying any external pressure. A solid bulk of nanostructured Ti3Al was obtained as short as 160 μsec by the Electrical discharge. At the same time, the surface has been modified into the form of Ti and Al nitrides due to the diffusion process of nitrogen to the surface. The input energy was found to be the most important parameter to affect the formation of a solid core and surface chemistry of the compact.

scholarly journals Wire Electrical Discharge Machining—A Review

Machines ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 69
Author(s):  
Laurenţiu Slătineanu ◽  
Oana Dodun ◽  
Margareta Coteaţă ◽  
Gheorghe Nagîţ ◽  
Irina Beşliu Băncescu ◽  
...  
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Machining Process ◽  
Wire Electrical Discharge Machining ◽  
Wire Electrode ◽  
Machining Processes ◽  
Scientific Papers ◽  
The Wire ◽  
Machining Productivity ◽  
Machined Surfaces

Wire electrical discharge machining has appeared mainly in response to the need for detachment with sufficiently high accuracy of parts of plate-type workpieces. The improvements introduced later allowed the extension of this machining technology to obtain more complex ruled surfaces with increasingly high requirements regarding the quality of the machined surfaces and the productivity of the wire electrical discharge machining process. Therefore, it was normal for researchers to be interested in developing more and more in-depth investigations into the various aspects of wire electrical discharge machining. These studies focused first on improving the machining equipment, wire electrodes, and the devices used to position the clamping of a wire electrode and workpiece. A second objective pursued was determining the most suitable conditions for developing the machining process for certain proper situations. As output parameters, the machining productivity, the accuracy, and roughness of the machined surfaces, the wear of the wire electrode, and the changes generated in the surface layer obtained by machining were taken into account. There is a large number of scientific papers that have addressed issues related to wire electrical discharge machining. The authors aimed to reveal the aspects that characterize the process, phenomena, performances, and evolution trends specific to the wire electrical discharge machining processes, as they result from scientific works published mainly in the last two decades.

scholarly journals Processing Characteristics of Micro Electrical Discharge Machining for Surface Modification of TiNi Shape Memory Alloys Using a TiC Powder Dielectric

Micromachines ◽  
2020 ◽  
Vol 11 (11) ◽  
pp. 1018
Author(s):  
Ziliang Zhu ◽  
Dengji Guo ◽  
Jiao Xu ◽  
Jianjun Lin ◽  
Jianguo Lei ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Surface Modification ◽  
Shape Memory ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Recast Layer ◽  
Powder Concentration ◽  
Micro Electrical Discharge Machining ◽  
Machining Properties

Titanium-nickel shape memory alloy (SMA) has good biomedical application value as an implant. Alloy corrosion will promote the release of toxic nickel ions and cause allergies and poisoning of cells and tissues. With this background, surface modification of TiNi SMAs using TiC-powder-assisted micro-electrical discharge machining (EDM) was proposed. This aims to explore the effect of the electrical discharge machining (EDM) parameters and TiC powder concentration on the machining properties and surface characteristics of the TiNi SMA. It was found that the material removal rate (MRR), surface roughness, and thickness of the recast layer increased with an increase in the discharge energy. TiC powder’s addition had a positive effect on increasing the electro-discharge frequency and MRR, reducing the surface roughness, and the maximum MRR and the minimum surface roughness occurred at a mixed powder concentration of 5 g/L. Moreover, the recast layer had good adhesion and high hardness due to metallurgical bonding. XRD analysis found that the machined surface contains CuO2, TiO2, and TiC phases, contributing to an increase in the surface microhardness from 258.5 to 438.7 HV, which could be beneficial for wear resistance in biomedical orthodontic applications.

scholarly journals Experimental Study on the Influence of Machining Conditions on the Quality of Electrical Discharge Machined Surfaces of aluminum alloy Al5052

Machines ◽  
2020 ◽  
Vol 8 (1) ◽  
pp. 12 ◽  
Author(s):  
Angelos P. Markopoulos ◽  
Emmanouil-Lazaros Papazoglou ◽  
Panagiotis Karmiris-Obratański
Keyword(s):  
Aluminum Alloy ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
White Layer ◽  
Machining Parameters ◽  
Machining Processes ◽  
Machining Conditions ◽  
Pulse On Time ◽  
Machined Surfaces

Although electrical discharge machining (EDM) is one of the first established non-conventional machining processes, it still finds many applications in the modern industry, due to its capability of machining any electrical conductive material in complex geometries with high dimensional accuracy. The current study presents an experimental investigation of ED machining aluminum alloy Al5052. A full-scale experimental work was carried out, with the pulse current and pulse-on time being the varying machining parameters. The polishing and etching of the perpendicular plane of the machined surfaces was followed by observations and measurements in optical microscope. The material removal rate (MRR), the surface roughness (SR), the average white layer thickness (AWLT), and the heat affected zone (HAZ) micro-hardness were calculated. Through znalysis of variance (ANOVA), conclusions were drawn about the influence of machining conditions on the EDM performances. Finally, semi empirical correlations of MRR and AWLT with the machining parameters were calculated and proposed.

scholarly journals Surface Modification Process by Electrical Discharge Machining with TiC Semi-sintered Electrode.

2001 ◽  
Vol 67 (1) ◽  
pp. 114-119 ◽  
Author(s):  
Toshio MORO ◽  
Akihiro GOTO ◽  
Naotake MOHRI ◽  
Nagao SAITO ◽  
Koei MATSUKAWA ◽  
...  
Keyword(s):  
Surface Modification ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Modification Process ◽  
Sintered Electrode

scholarly journals Precision Machining of Nimonic C 263 Super AlloyUsing WEDM

Coatings ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 590
Author(s):  
Katerina Mouralova ◽  
Libor Benes ◽  
Josef Bednar ◽  
Radim Zahradnicek ◽  
Tomas Prokes ◽  
...  
Keyword(s):  
Electrical Discharge ◽  
Cutting Speed ◽  
Machining Process ◽  
Precision Machining ◽  
Machining Accuracy ◽  
Pulse On Time ◽  
Pulse Off Time ◽  
Super Alloy ◽  
Machined Surfaces

Wire electrical discharge machining (WEDM) is an unconventional and very efficient technology for precision machining of the Nimonic C 263 super alloy, which is very widespread, especially in the energy, aerospace and automotive industries. Due to electrical discharge, defects in the form of cracks or burned cavities often occur on the machined surfaces, which negatively affect the correct functionality and service life of the manufactured components. To increase the efficiency of the machining of Nimonic C 263 using WEDM, in this study, extensive design of experiments was carried out, monitoring input factors in the form of machine parameters like Pulse off time, Gap voltage, Discharge current, Pulse on time and Wire feed, the output of which was comprehensive information about the behaviour of such machined surfaces, which allowed the optimization of the entire machining process. Thus, the optimization of the Cutting speed was performed in relation to the quality of the machined surface and the machining accuracy, as well as an analysis of the chemical composition of the machined surfaces and a detailed analysis of the lamella using a transmission electron microscope. A detailed study of the occurrence of surface or subsurface defects was also included. It was found that with the help of complex optimization tools, it is possible to significantly increase the efficiency of the machining of the Nimonic C 263 super alloy and achieve both financial savings in the form of shortened machine time and increasing the quality of machined surfaces.

Sign in / Sign up

Export Citation Format

Share Document