scholarly journals Discovery of a Two-Dimensional Type I Superionic Conductor

Author(s):  
Alex Rettie ◽  
Jingxuan Ding ◽  
Michael Johnson ◽  
Christos Malliakas ◽  
Naresh Osti ◽  
...  

<div> <div> <div> <p>Type I superionic conductors (e.g., AgI, Ag2Se, etc.) are defined by an abrupt transition to the superionic state and have so far been found exclusively in 3D crystal structures. Here, we reveal a new 2D type I superionic conductor, α-KAg3Se2 by total scattering techniques and complementary simulations. Quasi-elastic neutron scattering (QENS) from the high temperature superionic phase match a simple Fickian diffusion mechanism with a diffusion coefficient of ~10-5 cm2 s-1 between 710 and 740 K. Ab initio molecular dynamics simulations confirm that the mobile Ag+ ions are confined to 4 Å thick layers, in addition to reproducing the experimental diffusion coefficient from QENS and the local structure obtained from X-ray powder pair-distribution-function analysis. Finally, chemical substitutions suggest that the nature of alkali metal ions comprising the charge-balancing layers can facilitate or inhibit the phase transition temperature. </p> </div> </div> </div>

2020 ◽  
Author(s):  
Alex Rettie ◽  
Jingxuan Ding ◽  
Michael Johnson ◽  
Christos Malliakas ◽  
Naresh Osti ◽  
...  

<div> <div> <div> <p>Type I superionic conductors (e.g., AgI, Ag<sub>2</sub>Se, etc.) are defined by an abrupt transition to the superionic state and have so far been found exclusively in 3D crystal structures. Here, we reveal a new 2D type I superionic conductor, α-KAg<sub>3</sub>Se<sub>2</sub> by total scattering techniques and complementary simulations. Quasi-elastic neutron scattering (QENS) from the high temperature superionic phase match a simple Fickian diffusion mechanism with a diffusion coefficient of ~10<sup>-5</sup> cm<sup>2</sup> s<sup>-1</sup> between 710 and 740 K. Ab initio molecular dynamics simulations confirm that the mobile Ag<sup>+</sup> ions are confined to 4 Å thick layers, in addition to reproducing the experimental diffusion coefficient from QENS and the local structure obtained from X-ray powder pair-distribution-function analysis. Finally, chemical substitutions suggest that the nature of alkali metal ions comprising the charge-balancing layers can facilitate or inhibit the phase transition temperature. </p> </div> </div> </div>


2020 ◽  
Author(s):  
Alex Rettie ◽  
Jingxuan Ding ◽  
Michael Johnson ◽  
Christos Malliakas ◽  
Naresh Osti ◽  
...  

<div> <div> <div> <p>Type I superionic conductors (e.g., AgI, Ag<sub>2</sub>Se, etc.) are defined by an abrupt transition to the superionic state and have so far been found exclusively in 3D crystal structures. Here, we reveal a new 2D type I superionic conductor, α-KAg<sub>3</sub>Se<sub>2</sub> by total scattering techniques and complementary simulations. Quasi-elastic neutron scattering (QENS) from the high temperature superionic phase match a simple Fickian diffusion mechanism with a diffusion coefficient of ~10<sup>-5</sup> cm<sup>2</sup> s<sup>-1</sup> between 710 and 740 K. Ab initio molecular dynamics simulations confirm that the mobile Ag<sup>+</sup> ions are confined to 4 Å thick layers, in addition to reproducing the experimental diffusion coefficient from QENS and the local structure obtained from X-ray powder pair-distribution-function analysis. Finally, chemical substitutions suggest that the nature of alkali metal ions comprising the charge-balancing layers can facilitate or inhibit the phase transition temperature. </p> </div> </div> </div>


Author(s):  
Kranthi Kumar Kotta ◽  
L. Srinivas

The present investigation focuses on the development of mucoadhesive tablets of captopril which are designed to prolong the gastric residence time after oral administration. Matrix tablets of captopril were formulated using four mucoadhesive polymers namely guar gum, xanthan gum, HPMC K4M and HPMC K15M and studied for parameters such as weight variation, thickness, hardness, content uniformity, swelling index, mucoadhesive force and in vitro drug release. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M provide slow release of captopril over period of 12 hr and were found suitable for maintenance portion of oral controlled release tablets. The cumulative % of drug release of formulation F9 and F10 were 90 and 92, respectively. In vitro release from these tablets was diffusion controlled and followed zero order kinetics. The ‘n’ values obtained from the pappas-karsemeyer equation suggested that all the formulation showed drug release by non-fickian diffusion mechanism. Tablets formulated Xanthan gum or HPMC K4M with HPMC K15M (1:1) were established to be the optimum formulation with optimum bioadhesive force, swelling index & desired invitro drug release. This product was further subjected to stability study, the results of which indicated no significant change with respect to Adhesive strength and in vitro drug release study.


Biomolecules ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 635
Author(s):  
Ding Li ◽  
Menglong Wang ◽  
Wen-Liang Song ◽  
Deng-Guang Yu ◽  
Sim Wan Annie Bligh

A side-by-side electrospinning process characterized by a home-made eccentric spinneret was established to produce the Janus beads-on-a-string products. In this study, ketoprofen (KET) and methylene blue (MB) were used as model drugs, which loaded in Janus beads-on-a-string products, in which polyvinylpyrrolidone K90 (PVP K90) and ethyl cellulose (EC) were exploited as the polymer matrices. From SEM images, distinct nanofibers and microparticles in the Janus beads-on-a-string structures could be observed clearly. X-ray diffraction demonstrated that all crystalline drugs loaded in Janus beads-on-a-string products were transferred into the amorphous state. ATR-FTIR revealed that the components of prepared Janus nanostructures were compatibility. In vitro dissolution tests showed that Janus beads-on-a-string products could provide typical double drugs controlled-release profiles, which provided a faster immediate release of MB and a slower sustained release of KET than the electrospun Janus nanofibers. Drug releases from the Janus beads-on-a-string products were controlled through a combination of erosion mechanism (linear MB-PVP sides) and a typical Fickian diffusion mechanism (bead KET-EC sides). This work developed a brand-new approach for the preparation of the Janus beads-on-a-string nanostructures using side-by-side electrospinning, and also provided a fresh idea for double drugs controlled release and the potential combined therapy.


2004 ◽  
Vol 39 ◽  
pp. 540-544 ◽  
Author(s):  
Barbara T. Smith ◽  
Tas D. Van Ommen ◽  
Mark A. J. Curran

AbstractMethanesulphonic acid (MSA) is an important trace-ion constituent in ice cores, with connections to biological activity and sea-ice distribution. Post-depositional movement of MSA has been documented in firn, and this study investigates movement in solid ice by measuring variations in MSA distribution across several horizontal sections from an ice core after 14.5 years storage. The core used is from below the bubble close-off depth at Dome Summit South, Law Dome, East Antarctica. MSA concentration was studied at 3 and 0.5 cm resolution across the core widths. Its distribution was uniform through the core centres, but the outer 3 cm showed gradients in concentrations down to less than half of the central value at the core edge. This effect is consistent with diffusion to the surrounding air during its 14.5 year storage. The diffusion coefficient is calculated to be 2 ×10–13 m2 s–1, and the implications for the diffusion mechanism are discussed.


2021 ◽  
Vol 1026 ◽  
pp. 39-48
Author(s):  
Han Bing He ◽  
Yu Si Wang ◽  
Ze Xiang Luo ◽  
Jing Zeng

The effect of different additives Ni, Fe, Cu on the structure and properties of electrolyte system 78% Na3AlF6- -9.5%AlF3-5.0%CaF2-7.5%Al2O3 at 1200K and 1.01Mpa was studied by molecular dynamics method. The radial distribution function, coordination number, diffusion coefficient, conductivity, and viscosity of the system were discussed in detail. The results demonstrated that the order of the self-diffusion coefficient of ions in the electrolyte system is: Na+ > F- > O2- > Ca2+ >Al3+. The addition of Ni and Fe connected the free aluminum composite ion groups in the system through fluorine bridges, which enhanced the interaction between Al3+ and Al3+. The addition of Cu weakened the interaction between Al3 + and Al3+ and the F-. The interaction between Al3+ and Na+, [AlF7]4- ionic groups might appeared in the melt system. After adding NiO, Fe2O3, and Cu, the electrical conductivity of the system increased, and the viscosity decreased. The research work revealed the influence of Ni, Fe, Cu on the ion existence form, mobility, inter-ion interaction and diffusion mechanism of cryolite molten salt system, which has important guiding significance for aluminum electrolysis production.


INDIAN DRUGS ◽  
2017 ◽  
Vol 54 (10) ◽  
pp. 38-43
Author(s):  
Ch. Taraka Ramarao ◽  
◽  
B. Srinivasa Rao ◽  
J. Vijayaratana

Matrix Tablets, each containing 50 mg of diclofenac sodium, are prepared employing Kollidon SR by direct compression method. All the tablets were found to be non-disintegrating in acidic (pH1.2) and alkaline (pH 7.4) fluids. As such, the prepared tablets were of good quality with respect to drug content, hardness and friability. As the tablets formulated were non- disintegrating in acidic fluids, they are considered suitable for colon targeting. From the drug release study, it may be concluded that the (DK2) E2 formula of diclofenac sodium matrix tablets gives the desired release profile by showing a minimal release during the lag period of 5 h and complete release at the end of 12 h. The tablets having the optimised formula (DK2)E2, having 25% Kollidon SR with 5% of channelling agent (Eudragit S100 to that of Kollidon SR) showed minimal release of 27. 4% in the lag period of 5 hours and 99.3 % of the drug was released y the end of 12 h. The diclofenac sodium matrix tablets formulated by employing Kollidon SR and various channelling agents showed non-Fickian diffusion mechanism and followed zero order kinetics. The optimized formula (DK2) E2 follows Supercase II transport as mechanism for drug release and it follows zero order kinetics. Matrix tablets (DK2) E2 formulated employing 25% Kollidon SR and 5% Eudragit S100 are best suited to be used for colon targeting of diclofenac sodium.


Blood ◽  
2012 ◽  
Vol 120 (21) ◽  
pp. 2192-2192
Author(s):  
Francesco Zaia ◽  
Elena Boggio ◽  
Davide Rossi ◽  
Eleonora Toffoletti ◽  
Giuseppe Cappellano ◽  
...  

Abstract Abstract 2192 Background. In adults, ITP displays variable clinical presentation and different response to steroid, Rituximab, and other immune suppressive agents. The pathophysiological differences underlying these different behaviours are mostly unknown and a better knowledge of this biological heterogeneity might help identifying more targeted and rationale treatments for this disease. Purpose. To identify immunogenetic features distinguishing ITP patients from control and different subsets of ITP patients based on clinical presentation and responsiveness to steroid or Rituximab. Several biological analyses were based on the model of autoimmune lymphoprolipherative syndrome (ALPS), a pediatric disease due to genetic defects decreasing function of the Fas death receptor involved in shutting off the immune response and cytotoxic cell function. ALPS displays polyclonal lymphoproliferation, peripheral blood (PB) expansion of TCRαβ+ T-cells double negative for CD4 and CD8 (DN T-cells) and autoimmune manifestations frequently including thrombocytopenia. ALPS is mostly due to deleterious mutations of the Fas gene, but the +1239A>C single nucleotide polymorphism (SNP) of the osteopontin gene (OPN) and several variations of the perforin gene (PRF1) can act as disease modifier. Moreover, defective Fas function and these OPN and PRF1 variations are also displayed by subsets of patients with multiple sclerosis, type-I diabetes mellitus, systemic lupus erythematosus, progressive sclerosis, and chronic inflammatory demyelinating polyneuropathy. Patients and Methods. Adult patients with ITP and matched controls were selected for the analyses and stratified in different clinical subsets according to the disease severity and responsiveness to therapy (asymptomatic, steroid or Rituximab sensitive vs. steroid or Rituximab refractory). Analyses included evaluation of Fas-mediated apoptosis in T cell cultures; proportions of DN-T cells in PB; typing of the +1239A>C SNP of OPN and sequencing of PRF1. All patients were also investigated for TCR monoclonality, whereas BCR monoclonality was analysed in Rituximab-untreated patients only. Results. Analysis of Fas function and DN T-cell expansion was assessed in 100 ITP patients and showed that they displayed higher frequency of defective Fas function than the controls (17/100 vs. 5/100; P<0.05). Expansion of DN T-cells was detected in 2/17 (12%) patients displaying defective Fas function and 3/83 (4%) of those with normal Fas function. Analysis of PRF1 and OPN was performed in 64 patients. Sequencing of PRF1 detected three patients carrying two rare variations; two carried the N252S amino acid substitution (previously described in ALPS) and one the novel R385W amino acid substitution. The overall frequency of these rare variations was higher in the patients than in the controls (4.7% vs. 0.8%, P<0.05). By contrast, the OPN +1239A>C SNP displayed a similar distribution in the patients and the controls. TCR monoclonality was assessed in 76 patients and was detected in 4 of them (5%). BCR monoclonality was assessed in 17 patients in PB and bone marrow and it was always absent. No statistical differences of these parameters were detected comparing patients refractory vs. sensitive to either Rituximab or steroid treatments. However, a trend was found for DN T-cell expansion that tended to be more frequent in Rituximab resistant vs. sensitive patients (0/13 vs. 4/20, P=0.13). Conclusions. These preliminary analyses detected some differences between ITP patients and controls suggesting that defects involved in ALPS development may play a role in adult ITP too. Increasing the patient number is needed to confirm these data and, possibly, to detect differences between clinical subgroups. Disclosures: Off Label Use: Rituximab in ITP.


Sign in / Sign up

Export Citation Format

Share Document