New perspectives through new technologies Neue Perspektiven durch neue Technologien

GIS Business ◽  
2016 ◽  
Vol 11 (5) ◽  
pp. 38-40
Author(s):  
Schröder, M
Keyword(s):  
New Technologies ◽  
Neue Technologien

New perspectives through new technologies Neue Perspektiven durch neue Technologien

Agile Weiterentwicklung durch Produktinkremente/Agile Further Development through Product Increments – Procedure Model for the Continuous Development of Mechatronic Products

2021 ◽  
Vol 111 (06) ◽  
pp. 469-473
Author(s):  
Kilian Vernickel ◽  
Kevin Burger
Keyword(s):  
New Technologies ◽  
Customer Requirements ◽  
Continuous Development ◽  
Neue Technologien ◽  
Development Processes ◽  
Agile Approach ◽  
Further Development ◽  
Procedure Model

Neue Technologien kommen mit zunehmender Geschwindigkeit auf den Markt, während Kundenanforderungen unbeständiger und weniger vorhersehbar werden. Diese VUCA-Bedingungen erfordern eine zunehmende Reaktions- und Anpas- sungsfähigkeit von Entwicklern und Prozessen. Das in diesem Beitrag präsentierte „Procedure Model for Agile Further Development“ (PM4AFD) ist hierfür ein agiler Ansatz zur Weiterentwicklung von Produkten mithilfe von Minimum Viable Product Increments (MVPIs).   New technologies are evolving rapidly, while customer requirements are becoming more volatile and less predictable. These VUCA conditions require developers and development processes to be increasingly responsive and adaptive. The Procedure Model for Agile Further Development (PM4AFD) is an agile approach for further developing products using Minimum Viable Product Increments (MVPIs).

Maschinelle Werkzeugoberflächenbearbeitung von ADI*/Mechanical treatment of ADI tools - Smoothing and hardening of austempered ductile iron

2016 ◽  
Vol 106 (10) ◽  
pp. 719-724
Author(s):  
P. Prof. Groche ◽  
P. Stein ◽  
M. Steitz ◽  
J. Scheil ◽  
C. Prof. Müller
Keyword(s):  
Surface Treatment ◽  
Ductile Iron ◽  
High Strength Steel ◽  
Mechanical Treatment ◽  
New Technologies ◽  
High Strength ◽  
Austempered Ductile Iron ◽  
Neue Technologien ◽  
Product Cycles ◽  
Short Time

Hochfeste Tiefziehstähle und kurze Produktzyklen erfordern immer kürzere Amortisationszeiten der Werkzeuge. Daher wurden in den letzten Jahren neue Technologien zur automatisierten Oberflächenbearbeitung entwickelt. In den vorliegenden Untersuchungen wurde das Optimierungspotenzial einer Kombination aus automatisierter Oberflächenbearbeitung und lastangepasstem Werkstoff, sogenanntem Austempered Ductile Iron (ADI), ermittelt.   High-strength steel for deep-drawn products as well as brief product cycles require short time-to-values of tools. Thus, new technologies for automated surface treatments have been developed in the last years. Within the scope of the presented investigations, the potential for optimization of a combination of automated surface treatment and load-adjusted materials such as Austempered Ductile Iron (ADI) is examined.

scholarly journals Internet and New Technologies Law

2021 ◽  
Keyword(s):  
New Technologies ◽  
Neue Technologien

Seit dem ersten IGF-Gipfel der Vereinten Nationen 2006 in Athen dient das Treffen Entscheidungsträgern als Forum und Informationsquelle – v.a., was die Nutzung neuer Technologien– einschließlich rechtlicher und politischer Konsequenzen – angeht. Die Diskussionsbeiträge der 6. Tagung in Polen zum Thema „Internet und neue Technologien“ sind in diesem Band zusammengefasst.

Principles of Low-Vacuum SEM

1992 ◽  
Vol 50 (2) ◽  
pp. 1304-1305
Author(s):  
Klaus-Ruediger Peters
Keyword(s):  
New Technologies ◽  
High Vacuum ◽  
Optical Microscope ◽  
Specimen Surface ◽  
Electrical Field ◽  
Gaseous Environment ◽  
New Information ◽  
Gas Molecules ◽  
New Interactions ◽  
Gas Pressures

Only recently it became possible to expand scanning electron microscopy to low vacuum and atmospheric pressure through the introduction of several new technologies. In principle, only the specimen is provided with a controlled gaseous environment while the optical microscope column is kept at high vacuum. In the specimen chamber, the gas can generate new interactions with i) the probe electrons, ii) the specimen surface, and iii) the specimen-specific signal electrons. The results of these interactions yield new information about specimen surfaces not accessible to conventional high vacuum SEM. Several microscope types are available differing from each other by the maximum available gas pressure and the types of signals which can be used for investigation of specimen properties.Electrical non-conductors can be easily imaged despite charge accumulations at and beneath their surface. At high gas pressures between 10-2 and 2 torr, gas molecules are ionized in the electrical field between the specimen surface and the surrounding microscope parts through signal electrons and, to a certain extent, probe electrons. The gas provides a stable ion flux for a surface charge equalization if sufficient gas ions are provided.

Structural dynamics of P-type ATPase ion pumps

2019 ◽  
Vol 47 (5) ◽  
pp. 1247-1257 ◽  
Author(s):  
Mateusz Dyla ◽  
Sara Basse Hansen ◽  
Poul Nissen ◽  
Magnus Kjaergaard
Keyword(s):  
Structural Dynamics ◽  
Single Molecule ◽  
New Technologies ◽  
Atp Hydrolysis ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Time Resolved ◽  
Dynamics Simulations ◽  
Types Of Information ◽  
P Type

Abstract P-type ATPases transport ions across biological membranes against concentration gradients and are essential for all cells. They use the energy from ATP hydrolysis to propel large intramolecular movements, which drive vectorial transport of ions. Tight coordination of the motions of the pump is required to couple the two spatially distant processes of ion binding and ATP hydrolysis. Here, we review our current understanding of the structural dynamics of P-type ATPases, focusing primarily on Ca2+ pumps. We integrate different types of information that report on structural dynamics, primarily time-resolved fluorescence experiments including single-molecule Förster resonance energy transfer and molecular dynamics simulations, and interpret them in the framework provided by the numerous crystal structures of sarco/endoplasmic reticulum Ca2+-ATPase. We discuss the challenges in characterizing the dynamics of membrane pumps, and the likely impact of new technologies on the field.

Meiotic CENP-C is a shepherd: bridging the space between the centromere and the kinetochore in time and space

2020 ◽  
Vol 64 (2) ◽  
pp. 251-261
Author(s):  
Jessica E. Fellmeth ◽  
Kim S. McKim
Keyword(s):  
Chromosome Segregation ◽  
New Technologies ◽  
Early Prophase ◽  
Unique Role ◽  
Kinetochore Assembly ◽  
M Phase ◽  
In Vivo Analysis ◽  
Meiosis I

Abstract While many of the proteins involved in the mitotic centromere and kinetochore are conserved in meiosis, they often gain a novel function due to the unique needs of homolog segregation during meiosis I (MI). CENP-C is a critical component of the centromere for kinetochore assembly in mitosis. Recent work, however, has highlighted the unique features of meiotic CENP-C. Centromere establishment and stability require CENP-C loading at the centromere for CENP-A function. Pre-meiotic loading of proteins necessary for homolog recombination as well as cohesion also rely on CENP-C, as do the main scaffolding components of the kinetochore. Much of this work relies on new technologies that enable in vivo analysis of meiosis like never before. Here, we strive to highlight the unique role of this highly conserved centromere protein that loads on to centromeres prior to M-phase onset, but continues to perform critical functions through chromosome segregation. CENP-C is not merely a structural link between the centromere and the kinetochore, but also a functional one joining the processes of early prophase homolog synapsis to late metaphase kinetochore assembly and signaling.

Sign in / Sign up

Export Citation Format

Share Document