EXPERIMENTAL STUDIES ON THE DEVELOPMENT OF AN AUTOMATED SYSTEM FOR REGULATING THE SOIL DENSITY USED IN A SEEDING MACHINE

2021 ◽  
pp. 9-15
Author(s):  
ALEKSEI S. DOROKHOV ◽  

Research on the development of an automatic control system for the rolling-in working units is aimed at establishing the reliability and analytical relationships, determining the quality indicators of work in real conditions of the rolling-in working units of a seeding machine, and checking the patterns obtained in the fi eld and identifi ed theoretically. Research on the development of an automatic control system for the rolling implements was carried out when sowing dragee seeds of table beet of the Bordeaux variety with a seeding unit consisting of a Belarus-4235 tractor and a Monopil S15/12 precision seeding machine. The system for automatic control of soil density includes the main hardware and software: actuators for maintaining and deepening the rolling working units, microcontrollers, motor drivers, a non-contact ultrasonic sensor, a power supply unit and a sensor for measuring soil density. The paper presents the results of a study to determine the soil density when sowing seeds of table beet, depending on the moisture content of the soil in the sowing layer. The authors describe research methodology, provide graphical relationships between changes in soil density and the depth of seeding, and comment on the main obtained statistical characteristics of the experiment. As a result of the study, structural, echnological and functional diagrams of a rolling rink with an automatic control system using electronically controlled electric cylinders (linear actuators) have been developed. The optimal parameters of the linear drive of the press roller have been established: power - 50W, power supply - 12V, rod stroke - 200…600 mm, speed - 10…45 mm/s, load - 200…900 N. Experimental studies have shown the applicability of the presented system of the automatic control of soil density, which ensures the optimum density of the seedbed of 1.3…1.4 g/cm³. The described technique can be used to develop a soil density control system when sowing seeds of other vegetable crops.

2011 ◽  
Vol 130-134 ◽  
pp. 3502-3504
Author(s):  
De Min Zhang ◽  
Xue Hui Liang

The brake release electrical control board is a very important element of the elevator rescue operation control system. The brake release board provides a power supply to operate an elevator brake by a battery in rescue operation mode to allow a motion of a car until the next floor level to release any passengers. The brake release board has some buttons to operate the car and some LED’s to indicate the state of running. There are also some parameters in the board to adjust the operation.


2017 ◽  
Vol 0 (4) ◽  
Author(s):  
Borys M. Politykin ◽  
Yurii H. Tenditnyi ◽  
N. V. Tenditnaia ◽  
Olha N. Korneliuk

Author(s):  
M.N. Fel’ker ◽  
◽  
K.D. Bakhtereva ◽  

The article discusses the creation of an algorithm and the synthesis of a two-loop automatic control system for level and density, instead of the current single-loop one. Aim. Density stabilization and stabilization of the flotation machine power supply by creating a two-circuit automatic level and density control system in order to improve the quality of the final product. Materials and methods. Since there is no net lag in the system, the controller is tuned using the parametric optimization method, namely: according to the criteria of modular (MO) or symmetric optimum (CO). The MO/CO criterion is also used to adjust the contour. All automatic control systems are obtained in the MATLAB Simulink software package. Control quality is measured by metrics such as transient time, overshoot, and system error. The first two indicators show the dynamics of the process, and the last indicator shows the accuracy of the system. Conclusion. The finished two-loop automatic control system, developed in the software package MATLAB Simulink, according to the analysis of the obtained process parameters, provides stabilization of the density and level in the agitation tank for flotation.


2012 ◽  
Vol 220-223 ◽  
pp. 1158-1161
Author(s):  
Jin Chen ◽  
Chao Hang ◽  
Yao Ming Li ◽  
Zhi Qiang Gong

In order to improve the operating efficiency of the seeder, design an automatic control system, this study adopts programmable controller PLC, introduced the composition and connection way of hardware, part program of the ladder diagram, and a variety of modes of operation technology, fully meet the requirement of automatic control, experimental studies have shown that the qualified rate of seeding is more than 90%, up to 500 discs per hour.


Author(s):  
Vladimir Konevtsov ◽  
Igor Poletaev ◽  
Sergey Verteshev

<p class="R-AbstractKeywords"><span lang="EN-US">The article given shows functional possibilities of creating discrete automatic schemes in CAD of digital automatic control system (CAD of digital ACS), in complex of Software Design of System of the Digital Control (Complex SDSDC) for automated system of  control of technological processes (ASC TP). Possibilities of complex SDSDC for implementing combination and sequential control compared with requirements of international standard IEC 61131-3:2003 (Part 3: Programming languages) are estimated.</span></p>


Sign in / Sign up

Export Citation Format

Share Document