Automatic control system of power supply of active consumers

2017 ◽  
Author(s):  
A. L. Kulikov ◽  
M. V. Sharygin
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Power Supply

EXPERIMENTAL STUDIES ON THE DEVELOPMENT OF AN AUTOMATED SYSTEM FOR REGULATING THE SOIL DENSITY USED IN A SEEDING MACHINE

2021 ◽  
pp. 9-15
Author(s):  
ALEKSEI S. DOROKHOV ◽  
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Power Supply ◽  
Experimental Studies ◽  
Automated System ◽  
Statistical Characteristics ◽  
Vegetable Crops ◽  
Soil Density ◽  
Density Control

Research on the development of an automatic control system for the rolling-in working units is aimed at establishing the reliability and analytical relationships, determining the quality indicators of work in real conditions of the rolling-in working units of a seeding machine, and checking the patterns obtained in the fi eld and identifi ed theoretically. Research on the development of an automatic control system for the rolling implements was carried out when sowing dragee seeds of table beet of the Bordeaux variety with a seeding unit consisting of a Belarus-4235 tractor and a Monopil S15/12 precision seeding machine. The system for automatic control of soil density includes the main hardware and software: actuators for maintaining and deepening the rolling working units, microcontrollers, motor drivers, a non-contact ultrasonic sensor, a power supply unit and a sensor for measuring soil density. The paper presents the results of a study to determine the soil density when sowing seeds of table beet, depending on the moisture content of the soil in the sowing layer. The authors describe research methodology, provide graphical relationships between changes in soil density and the depth of seeding, and comment on the main obtained statistical characteristics of the experiment. As a result of the study, structural, echnological and functional diagrams of a rolling rink with an automatic control system using electronically controlled electric cylinders (linear actuators) have been developed. The optimal parameters of the linear drive of the press roller have been established: power - 50W, power supply - 12V, rod stroke - 200…600 mm, speed - 10…45 mm/s, load - 200…900 N. Experimental studies have shown the applicability of the presented system of the automatic control of soil density, which ensures the optimum density of the seedbed of 1.3…1.4 g/cm³. The described technique can be used to develop a soil density control system when sowing seeds of other vegetable crops.

Elevator Brake Release Automatic Control System

2011 ◽  
Vol 130-134 ◽  
pp. 3502-3504
Author(s):  
De Min Zhang ◽  
Xue Hui Liang
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Power Supply ◽  
Operation Mode ◽  
Control Board ◽  
Rescue Operation ◽  
Floor Level ◽  
Electrical Control ◽  
Operation Control

The brake release electrical control board is a very important element of the elevator rescue operation control system. The brake release board provides a power supply to operate an elevator brake by a battery in rescue operation mode to allow a motion of a car until the next floor level to release any passengers. The brake release board has some buttons to operate the car and some LED’s to indicate the state of running. There are also some parameters in the board to adjust the operation.

Investigation of the stability of periodic motions in a nonlinear automatic control system based on the fast fourier transform

2003 ◽  
Vol 3 ◽  
pp. 297-307
Author(s):  
V.V. Denisov
Keyword(s):  
Fourier Transform ◽  
Control System ◽  
Automatic Control ◽  
Fast Fourier Transform ◽  
Automatic Control System ◽  
Resonance Phenomenon ◽  
Periodic Motions ◽  
Multiply Connected ◽  
Non Linear ◽  
The Stability

An approach to the study of the stability of non-linear multiply connected systems of automatic control by means of a fast Fourier transform and the resonance phenomenon is considered.

scholarly journals Results of Laboratory Studies of the Automated Sorting System for Root and Onion Crops

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1257
Author(s):  
Alexey Dorokhov ◽  
Alexander Aksenov ◽  
Alexey Sibirev ◽  
Nikolay Sazonov ◽  
Maxim Mosyakov ◽  
...  
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Technological Parameters ◽  
Post Harvest ◽  
Manual Sorting ◽  
Sorting System ◽  
Working Bodies ◽  
Automatic Removal

The roller and sieve machines most commonly used in Russia for the post-harvest processing of root and tuber crops and onions have a number of disadvantages, the main one being a decrease in the quality of sorting due to the contamination of working bodies, which increases the quantity of losses during sorting and storage. To obtain high-quality competitive production, it is necessary to combine a number of technological operations during the sorting process, such as dividing the material into classes and fractions by quality and size, as well as identifying and removing damaged products. In order to improve the quality of sorting of root tubers and onions by size, it is necessary to ensure the development of an automatic control system for operating and technological parameters, the use of which will eliminate manual sorting on bulkhead tables in post-harvest processing. To fulfill these conditions, the developed automatic control system must have the ability to identify the material on the sorting surface, taking into account external damage and ensuring the automatic removal of impurities. In this study, the highest sorting accuracy of tubers (of more than 91%) was achieved with a forward speed of 1.2 m/s for the conveyor of the sorting table, with damage to 2.2% of the tubers, which meets the agrotechnical requirements for post-harvest processing. This feature distinguishes the developed device from similar ones.

Sign in / Sign up

Export Citation Format

Share Document