State-of-the-art review on the time-dependent behaviour of composite steel-concrete columns

2021 ◽  
pp. 83-109
Author(s):  
Yue Geng ◽  
Gianluca Ranzi ◽  
Yu-yin Wang ◽  
Raymond Ian Gilbert ◽  
Sumei Zhang

<p>This chapter presents a state-of-the-art review of the time-dependent behaviour of composite columns. The first part of the chapter outlines the available typologies and advantages of composite columns. This is followed by an overview of the time-dependent response of concrete (specific to composite columns) and an introduction to concrete confinement. The main part of the chapter is devoted to the state-of-the-art review on how concrete time effects influence the long-term and ultimate behaviour of concrete-filled steel tube (CFST) columns, and on the combined effects produced by sustained loading and chloride corrosion on CFST columns. The review then deals with the long-term behaviour of concrete-filled double skin tube (CFDST) and encased composite columns. The final parts of the chapter provide a review of the time-dependent differential axial shortening (DAS) in vertical components of multi-storey buildings and on the long-term response of arch bridges.</p>


2021 ◽  
pp. 41-59
Author(s):  
Gianluca Ranzi ◽  
Raymond Ian Gilbert

<p>This chapter presents a state-of-the-art review of work published to date on the time-dependent response of composite steel-concrete slabs. The key components of this form of construction are introduced in the first part of the chapter, followed by a review of the time-dependent behaviour of the concrete and how it affects the in-service response of composite slabs. Throughout the chapter, particular attention is given to recent experimental and modelling work related to concrete time effects, and how these affect the in-service response of composite slabs, including the development of non-uniform shrinkage gradients that have been recently shown to occur in composite floors due to the inability of the concrete to dry from its underside because of the presence of the profiled steel sheeting.</p>





Modern concrete structures, realized through complex sequential construction techniques and/or characterized by significant non-homogeneities, are in general very sensitive to the effects of time-dependent behaviour of concrete (creep and shrinkage). Guidelines for the evaluation of these effects were developed in the last decades by international pre-standard and standard institutions on the basis of a common, although progressively evolving, scientific background, and of a substantially worldwide harmonized format. The author discusses the development, with his large personal involvement, of this favourable scenario, evidencing areas of well established consensus and open problems. One pending problem is still represented by the uncertainties of prediction models, with particular regards to the multi-decade long-term prediction of creep. In what concerns the evaluation of the structural effects of creep, it is commonly accepted that a reliable analysis of the structural response in service conditions may be performed on the basis of the theory of ageing linear viscoelasticity, first established by Italian mathematician V. Volterra at the dawn of 20th century. The paper discusses the computational implications of this approach with reference on the one hand to the adoption of realistic advanced models for the prediction of the creep behaviour of concrete, and, on the other hand, to the complexity and sequential character of the constructions, and illustrates current updated guidelines developed at the international level for the evaluation of the effects of creep, both in the conceptual and preliminary design stages and in the subsequent detailed construction-stage and long-term reliability analyses of complex and sequential structures. These guidelines are intended to deal also with other phenomena, which are responsible of causing deviations from aging linear viscoelasticity, like tensile cracking, cyclic creep, and stress relaxation in prestressing tendons at variable strain, as well as the effects of humidity and temperature variations. The paper must be intended as a homage to the memory of CEB (Comité Euro-International du Béton, Euro-International Committee for Concrete) Honorary Member and member of the Academy of Construction and Architecture of the USSR Alexei A. Gvozdev, for long-time head of the laboratory of reinforced concrete of NIIZHB, the Institute for Concrete and Reinforced Concrete now named after him, for his crucial role in encouraging and assisting the author in the initial steps of transporting into CEB and FIP (Fédération Internationale de la Précontrainte, International Federation for Prestressing) ambient the fundaments of this new advanced format for creep analysis, to which the school of Soviet scientists and Gvozdev himself had given a fundamental contribution. The present edition of the paper incorporates some significant updates related to the advancement in the international debate, with respect to the previous edition published in the Journal “Industrial and Civil Engineering” (Promyshlennoe i grazhdanskoe stroitel’stvo) of December 2014.



2014 ◽  
Vol 553 ◽  
pp. 606-611
Author(s):  
Kai Luo ◽  
Yong Lin Pi ◽  
Wei Gao ◽  
Mark A. Bradford

This paper presents a finite element model for the linear and nonlinear analysis of time-dependent behaviour of concrete-filled steel tubular (CFST) arches. It is known when a CFST arch is subjected to a sustained load, the visco-elastic effects of creep in the concrete core will result in significant increases of the deformations and internal forces in the long-term. In this paper, a finite element model is developed using the age-adjusted effective modulus method to describe the creep behaviour of the concrete core. The finite element results of long-term displacement and stress redistribution agree very well with their analytical counterparts. The finite element model is then used to compare the linear and nonlinear results for the long-term behaviour of shallow CFST arches. It is demonstrated that the linear analysis underestimates the long-term deformations and internal force significantly and that to predict the time-dependent behaviour shallow CFST arches accurately, the nonlinear analysis is essential.



2015 ◽  
Vol 19 (sup1) ◽  
pp. s119-s139 ◽  
Author(s):  
Huan-ling Wang ◽  
Wei-ya Xu ◽  
Long Yan ◽  
Qing-xiang Meng ◽  
Ru-bin Wang ◽  
...  


2019 ◽  
Vol 14 (2) ◽  
pp. 227-248
Author(s):  
Yongbao Wang ◽  
Renda Zhao ◽  
Yi Jia ◽  
Ping Liao

This paper continues the previous study on clarifying the time-dependent behaviour of Beipanjiang Bridge ‒ a reinforced concrete arch bridge with concrete-filled steel tubular stiffened skeleton. The obtained prediction models and the Finite Element Models were used to simulate the long-term behaviour and stress redistribution of the concrete arch bridge. Three-dimensional beam elements simulated the stiffened skeleton and surrounding concrete. Then, a parameters study was carried out to analyse the time-dependent behaviour of the arch bridge influenced by different concrete creep and shrinkage models. The simulation results demonstrate that concrete creep and shrinkage have a significant influence on the time-dependent behaviour of the concrete arch bridge. After the bridge completion, the Comite Euro-International du Beton mean deviation of displacements obtained by 1990 CEBFIP Model Code: Design Code model and fib Model Code for Concrete Structures 2010 model are 3.4%, 31.9% larger than the results predicted by the modified fib Model Code for Concrete Structures 2010 model. The stresses between the steel and the concrete redistribute with time because of the concrete long-term effect. The steel will yield if the fib Model Code for Concrete Structures 2010 model is used in the analysis. The stresses in a different part of the surrounding concrete are non-uniformly distributed.



2021 ◽  
pp. 61-82
Author(s):  
Gianluca Ranzi ◽  
Graziano Leoni ◽  
Raymond Ian Gilbert ◽  
Luigino Dezi ◽  
Riccardo Zandonini

<p>This chapter provides an overview of the work carried out to date on the long-term behaviour of composite steel-concrete beams. In the first part of the chapter, a description of the components forming a composite member is presented. This is followed by an outline of the main kinematic concepts, such as full and partial shear interaction, that influence the structural response of this form of construction due to the flexibility of the shear connection provided between the concrete and steel components. The review of the work performed on the time-dependent behaviour of concrete and its influence on the long-term structural response of composite beams for building and bridge applications is then presented. The modelling and experimental work considered in the review highlights the importance of considering concrete time effects, when predicting the in-service response of composite beams.</p>



2018 ◽  
Vol 7 (3) ◽  
pp. 1826
Author(s):  
Heyam H. Shaalan ◽  
Mohd Ashraf Mohamad Ismail ◽  
Romziah Azit

Shotcrete is ordinary concrete applied to the surface under high pressure. It demonstrates a highly time-dependent behaviour after few hours of application. Traditional approaches assume a simple linear elastic behaviour using a hypothetical young modulus to investigate the time-dependency and creep effects. In this paper, a new constitutive model of shotcrete is applied to evaluate the time-dependent behaviour of a TBM tunnel lining and investigate the parameters that can influence this behaviour. The Shotcrete model is based on the framework of Elasto-plasticity and designed to model shotcrete linings more realistically. The basic data of Pahang-Selangor Raw Water Transfer Project is used for the analysis study. An attempt is made to investigate the influence of some input parameters of the shotcrete model on the time-dependent behaviour of the shotcrete lining. These parameters include the time-dependent stiffness/strength parameters, creep and shrinkage parameters and steel fibre parameters. The variation in shotcrete strength classes causes a noticeable influence on the development of shotcrete compressive strength with time, particularly during the first days of application. The creep and shrinkage strain cause a considerable reduction in the development of the shotcrete stress with time. The impact of steel fibre content is determined, and the result indicated that the development of plain shotcrete stresses with time is lower than that of the reinforced shotcrete. In addition, a comparison study is performed to analyse the tunnel lining behaviour using both shotcrete model and an elastic analysis. Significant differences in shotcrete lining stresses are achieved when using the elastic analysis while the shotcrete model results in a reasonable result that can be used for the design requirements. 



2021 ◽  
Vol 3 (5) ◽  
Author(s):  
Rajeswara R. Resapu ◽  
Roger D. Bradshaw

Abstract In-vitro mechanical indentation experimentation is performed on bulk liver tissue of lamb to characterize its nonlinear material behaviour. The material response is characterized by a visco-hyperelastic material model by the use of 2-dimensional inverse finite element (FE) analysis. The time-dependent behaviour is characterized by the viscoelastic model represented by a 4-parameter Prony series, whereas the large deformations are modelled using the hyperelastic Neo-Hookean model. The shear response described by the initial and final shear moduli and the corresponding Prony series parameters are optimized using ANSYS with the Root Mean Square (RMS) error being the objective function. Optimized material properties are validated using experimental results obtained under different loading histories. To study the efficacy of a 2D model, a three dimensional (3D) model of the specimen is developed using Micro-CT of the specimen. The initial elastic modulus of the lamb liver obtained was found to 13.5 kPa for 5% indentation depth at a loading rate of 1 mm/sec for 1-cycle. These properties are able to predict the response at 8.33% depth and a loading rate of 5 mm/sec at multiple cycles with reasonable accuracy. Article highlights The visco-hyperelastic model accurately models the large displacement as well as the time-dependent behaviour of the bulk liver tissue. Mapped meshing of the 3D FE model saves computational time and captures localized displacement in an accurate manner. The 2D axisymmetric model while predicting the force response of the bulk tissue, cannot predict the localized deformations.



Sign in / Sign up

Export Citation Format

Share Document