scholarly journals Experimental Study on Bond Stress between Ultra High Performance Concrete and Steel Reinforcement

2018 ◽  
Vol 3 (12) ◽  
pp. 1235 ◽  
Author(s):  
Ahad Amini Pishro ◽  
Xiong Feng
Keyword(s):  
Mechanical Properties ◽  
Shear Stress ◽  
High Performance ◽  
High Performance Concrete ◽  
Longitudinal Shear ◽  
Steel Reinforcement ◽  
Bond Stress ◽  
Axial Deformation ◽  
Ultra High Performance Concrete ◽  
Cement Based Materials

Due to axial deformations generally caused by flexure, shear stress will be generated across the interface between reinforcement and surrounding concrete. This longitudinal shear stress is called bond stress and coordinates deformation between concrete and reinforcement. With increasing a member's axial deformation, bond stress finally reaches its ultimate value, bond strength, after which deformation of reinforcement and surrounding concrete will be not coordinated any more. Studies have shown that addition of nanosilica into cement-based materials improves their mechanical properties. Considering the unique characteristics of nanosilica, it seems that this material can be used in ultra-high performance concrete. Therefore, further research is needed on how to use it in concrete mixes. Due to the importance of examining bond stress and the lack of exact equations for bond stress of ultra-high performance concrete and steel reinforcement, the present study aimed to assess the bond stress between concrete and steel reinforcement.

scholarly journals The Mechanical Properties and Damage Evolution of UHPC Reinforced with Glass Fibers and High-Performance Polypropylene Fibers

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2455
Author(s):  
Jiayuan He ◽  
Weizhen Chen ◽  
Boshan Zhang ◽  
Jiangjiang Yu ◽  
Hang Liu
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Damage Evolution ◽  
High Performance ◽  
High Performance Concrete ◽  
Glass Fibers ◽  
Ultra High Performance Concrete ◽  
Concrete Damaged Plasticity ◽  
The Difference ◽  
Experimental Values

Due to the sharp and corrosion-prone features of steel fibers, there is a demand for ultra-high-performance concrete (UHPC) reinforced with nonmetallic fibers. In this paper, glass fiber (GF) and the high-performance polypropylene (HPP) fiber were selected to prepare UHPC, and the effects of different fibers on the compressive, tensile and bending properties of UHPC were investigated, experimentally and numerically. Then, the damage evolution of UHPC was further studied numerically, adopting the concrete damaged plasticity (CDP) model. The difference between the simulation values and experimental values was within 5.0%, verifying the reliability of the numerical model. The results indicate that 2.0% fiber content in UHPC provides better mechanical properties. In addition, the glass fiber was more significant in strengthening the effect. Compared with HPP-UHPC, the compressive, tensile and flexural strength of GF-UHPC increased by about 20%, 30% and 40%, respectively. However, the flexural toughness indexes I5, I10 and I20 of HPP-UHPC were about 1.2, 2.0 and 3.8 times those of GF-UHPC, respectively, showing that the toughening effect of the HPP fiber is better.

Volumetric Changes of the UHPC Matrix and its Determination

2016 ◽  
Vol 827 ◽  
pp. 215-218 ◽  
Author(s):  
David Čítek ◽  
Milan Rydval ◽  
Jiří Kolísko
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
Experimental Tests ◽  
Structure Design ◽  
Ultra High Performance Concrete ◽  
Fine Grained ◽  
Durability Properties ◽  
Shrinkage And Creep

Research in the Ultra-High Performance Concrete applications field is very important. Current experiences shows that the structure design should be optimize due to relatively new fine-grained cement-based Hi-Tech material with excellent mechanical and durability properties. It is not sure if some of the volumetric changes like creep or shrinkage has or has not an impact on an advantage for the construction and for the structure design. The effect of the shrinkage and creep of common used concretes are well known and well described at publications but the effect of volumetric changes of the UHPC is mostly unknown because of the fact that some of experimental tests are long term and the development of UHPC is still in its basics. A lot of works are focused on a basic mechanical properties and durability tests.

Factorial Design Approach of Ultra-High Performance Concrete

2013 ◽  
Vol 405-408 ◽  
pp. 2847-2850
Author(s):  
Wu Jian Long ◽  
Wei Lun Wang ◽  
Qi Ling Luo ◽  
Bi Qin Dong
Keyword(s):  
Mechanical Properties ◽  
Factorial Design ◽  
Statistical Models ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Design Approach ◽  
Ultra High Performance Concrete ◽  
Self Consolidating Concrete ◽  
Slump Flow

In order to understand the influence of mixture parameters on ultra-high strength self-consolidating concrete (UHS-SCC) behaviour, an experimental design was carried out in this investigation. In total, 19 SCC mixtures were prepared to determine several key responses that affect the slump flow and compressive strength of UHS-SCC. The statistical models derived from the factorial design approach can be used to quantify the effect of mixture parameters and their coupled effects on fresh and mechanical properties of SCC.

Material Properties of Ultra - High Performance Concrete in Extreme Conditions

2016 ◽  
Vol 711 ◽  
pp. 157-162 ◽  
Author(s):  
David Citek ◽  
Milan Rydval ◽  
Stanislav Rehacek ◽  
Jiří Kolísko
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Material Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Accurate Information ◽  
Extreme Conditions ◽  
Ultra High Performance Concrete ◽  
Freeze Thaw

The Ultra High Performance Concrete (UHPC) is a very promising material suitable for application in special structures. However, the knowledge of performance of this relatively new material is rather limited. The exceptional mechanical properties of UHPC allow for a modification of the design rules, which are applicable in ordinary or high strength concrete. This paper deals in more detail with impact of thermal stress on bond properties between prestressing strands and UHPC and an influence of high temperature to final material properties of different UHPC mixtures. Specimens in the first experimental part were subjected to the cycling freeze-thaw testing. The relationship between bond behavior of both type of material (UHPC and ordinary concrete) and effect of cycling freeze-thaw tests was investigated. The second part of experimental work was focused on mechanical properties of UHPC exposure to the high temperature (Tmax = 200°C to Tmax = 1000°C). Tested mechanical properties were compressive and flexural strengths, the fracture properties will be presented in the next paper. The obtained experimental data serve as a basis for further systematic experimental verification and more accurate information about the significantly higher material properties of UHP(FR)C and its behavior in extreme conditions.

Influences of Micropowder Gradation on Rheological Properties of Cement-Based Composite Pastes

2007 ◽  
Vol 353-358 ◽  
pp. 1398-1401
Author(s):  
Jian Qing Gong ◽  
Han Ning Xiao ◽  
Zheng Yu Huang ◽  
Jiu Su Li ◽  
Jing Nie ◽  
...  
Keyword(s):  
Shear Stress ◽  
Rheological Properties ◽  
Packing Density ◽  
High Performance ◽  
High Performance Concrete ◽  
Plastic Viscosity ◽  
Rheological Parameters ◽  
Ultra High Performance Concrete ◽  
Cement Pastes ◽  
Compressible Packing Model

The rheological parameters of cement pastes were investigated by varying the type and content of micropowders and the ratio of water to binder. Compressible packing model was used to calculate the packing density and to evaluate the influence of micropowders gradation on the rheological properties of fresh cement pastes. Results indicate that the higher the packing density is, the lower the yielding shear stress and plastic viscosity will be. When the ratio of water to binder is less than 0.20, the cement paste with 15% UFA and 15% SF has highest packing density and lowest yielding shear stress and plastic viscosity, which is beneficial to the workability of ultra-high performance concrete.

Sign in / Sign up

Export Citation Format

Share Document