scholarly journals Synthesis and Characterization of New Polyimide/Organoclay Nanocomposites Containing Benzophenone Moieties in the Main Chain

2017 ◽  
Vol 57 (2) ◽  
Author(s):  
Khalil Faghihi ◽  
Mostafa Ashouri ◽  
Akram Feyzi
Keyword(s):  
Main Chain ◽  
In Situ Polymerization ◽  
Clay Content ◽  
Nanocomposite Films ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

<p>A series of nanocomposites consist of organic polyimide and organo-modified clay content varying from 0 to 5 wt%, were successfully prepared by in situ polymerization. Polyimide used as a matrix of nanocomposite was prepared through the reaction of 1,4-bis [4-aminophenoxy] butane (APB) and 3،3΄،4،4΄-benzophenone tetra carboxylic dianhydride (BTDA) in N,N-dimethylacetamide (DMAc). The resulting nanocomposite films were characterized by FT-IR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA).</p>

Synthesis and Characterization of New Polyimide/Organoclay Nanocomposites Derived From 3,3′,4,4′-Biphenyltetracarboxylic Dianhydride and 1,2-Bis(4-Aminophenoxy)Ethane

2013 ◽  
Vol 32 (2) ◽  
pp. 171-178 ◽  
Author(s):  
Akram Feyzi ◽  
Khalil Faghihi ◽  
Abdol Ali Zolanvari
Keyword(s):  
Clay Content ◽  
Nanocomposite Films ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Biphenyltetracarboxylic Dianhydride ◽  
Ft Ir Spectroscopy

AbstractA series of nanocomposites consist of organic polyimide and organo-modified clay content varying from 0 to 10 mass%, were successfully prepared by in situ polymerization. Polyimide used as a matrix of nanocomposite was prepared through the reaction of 1,2-bis(4-aminophenoxy)ethane (BAE) and 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) in N,N-dimethylacetamide (DMAC). The resulting nanocomposite films were characterized by FT-IR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA).

scholarly journals Thermal and electrical properties of polyimide/PANI nanofiber composites prepared via in situ polymerization

2018 ◽  
Vol 36 (2) ◽  
pp. 283-287
Author(s):  
Aseel A. Kareem
Keyword(s):  
In Situ Polymerization ◽  
Composite Films ◽  
Nanocomposite Films ◽  
X Ray Diffraction ◽  
Nanofiber Composite ◽  
X Ray ◽  
Thermal And Electrical Properties ◽  
Ft Ir ◽  
Thermal Stability Of

Abstract Polyimide/polyaniline nanofiber composites were prepared by in situ polymerization with various weight percentages of polyaniline (PANI) nanofibers. X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR), proved the successful preparation of PANI nanofiber composite films. In addition, thermal stability of PI/PANI nanofiber composites was superior relative to PI, having 10 % gravimetric loss in the range of 623 °C to 671 °C and glass transition temperature of 289 °C to 297 °C. Furthermore, the values of the loss tangent tanδ and AC conductivity σAC of the nanocomposite films were notably higher than those of pure polyimide. The addition of 5 wt.% to 15 wt.% PANI nanofiber filler enhanced the activation energy of PI composites from 0.37 eV to 0.34 eV.

Synthesis and Characterization of the PANI/ITO Conducting Nanocomposites

2010 ◽  
Vol 663-665 ◽  
pp. 542-545 ◽  
Author(s):  
Bing Jie Zhu ◽  
Xin Wei Wang ◽  
Mei Fang Zhu ◽  
Qing Hong Zhang ◽  
Yao Gang Li ◽  
...  
Keyword(s):  
Doping Concentration ◽  
In Situ Polymerization ◽  
Synthesis And Characterization ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Conductivity ◽  
Scanning Electron

The PANI/ITO conducting nanocomposites have been synthesized by in-situ polymerization. The obtained nanocomposites were characterized by X-ray diffraction pattern, scanning electron microscopy and Fourier transform infrared. Electrical conductivity measurements on the samples pressed into pellets showed that the maximum conductivity attained 2.0 ± 0.05 S/cm for PANI/ITO nanocomposites, at ITO doping concentration of 10 wt%. The results of the present work may provide a simple, rapid and efficient approach for preparing PANI/ITO nanocomposites.

In Situ Polymerization and Characterization of Poly(ε-caprolactone)/Layered Double Hydroxide Nanocomposites

2012 ◽  
Vol 557-559 ◽  
pp. 371-374
Author(s):  
Lian Liu ◽  
Teng Yu ◽  
Pei Wang ◽  
Guang Shuo Wang
Keyword(s):  
Layered Double Hydroxide ◽  
In Situ Polymerization ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Uv Visible ◽  
Absorbance Peak ◽  
Double Hydroxide

Nanocomposites of poly(ε-caprolactone) (PCL) and layered double hydroxide (LDH) were prepared by in situ polymerization at low LDHs loadings in this work. The resultants were characterized by FTIR spectroscopy, X-ray diffraction (XRD), differential scanning calorimeter (DSC) and UV-visible spectroscopy (UV-vis). FTIR showed that the PCL/LDHs nanocomposites were prepared successfully by in situ polymerization and XRD spectra showed that the crystal structure did not change greatly in the presence of LDHS. DSC results confirmed that LDHs could act as nucleating agents. UV-vis spectra showed that LDHs had stronger absorbance peak than LDH. Moreover, the PCL/LDHs nanocomposites had strong anti-ultraviolet effect by introduction of LDHs into polymer matrix.

scholarly journals The In Situ Polymerization and Characterization of PA6/LiCl Composites

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
Dandan Sun ◽  
Jiang Li ◽  
Qinghua Pan ◽  
Chaowei Hao ◽  
Guoqiao Lai
Keyword(s):  
Sodium Hydroxide ◽  
Anionic Polymerization ◽  
In Situ Polymerization ◽  
Degree Of Crystallinity ◽  
Inorganic Salts ◽  
X Ray Diffraction ◽  
X Ray ◽  
Phase Proportion

PA6/LiCl composites were synthesized by in situ anionic polymerization based on the interaction between the inorganic salts and PA6. Sodium hydroxide as initiator and N-acetylcaprolactam as activator were used in the preparation of PA6/LiCl composites with variety of LiCl content. X-ray diffraction (XRD) and differential scanning calorimeter (DSC) testing results showed that both of degree of crystallinity and melting temperature of the composites were decreased under the influence of LiCl. And theγcrystal phase proportion increased with increasing the LiCl content to appropriate amount.

scholarly journals Growth and Characterization of Pure and Doped L-Alanine Tartrate Single Crystals

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
K. Rajesh ◽  
B. Milton Boaz ◽  
P. Praveen Kumar
Keyword(s):  
Single Crystals ◽  
Vickers Microhardness ◽  
Diffraction Method ◽  
Dielectric Studies ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Single crystals of pure and Lanthanum doped L-Alanine Tartrate were grown by slow evaporation method. The cell parameters were determined using single crystal X-ray diffraction method. To improve the physical properties of the LAT crystal, Lanthanum dopant was added by 2 mol%. ICP studies confirm the presence of Lanthanum in the grown LAT crystal. Transparency range of the crystal was determined using UV-VIS-NIR spectrophotometer. The functional groups of pure and doped LAT crystals were analyzed by FT-IR spectroscopy. Using Vickers microhardness tester, mechanical strength of the material was found. Dielectric studies of pure and doped LAT single crystals were carried out. The doped LAT crystal is found to have efficiency higher than that of pure LAT crystal.

Synthesis and Characterization of HgSe Nanostructure Using a Novel Precursor

2013 ◽  
Vol 32 (2) ◽  
pp. 157-162 ◽  
Author(s):  
Mahdiyeh Esmaeili-Zare ◽  
Masoud Salavati-Niasari ◽  
Davood Ghanbari
Keyword(s):  
Electron Microscopy ◽  
Synthesis And Characterization ◽  
Sonochemical Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Mercury Selenide ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

AbstractMercury selenide nanostructures were synthesized from the reaction of N, N′-bis(salicylidene)propane-1,3-diamine mercury complex, (Hg(Salpn)) as a novel precursor, via sonochemical method. The effect of different surfactant on the morphology and particle size of the products was investigated. Products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy and X-ray energy dispersive spectroscopy (EDS).

Synthesis and Characterization of Structure of Fe3O4@Graphene Oxide Nanocomposites

2016 ◽  
Vol 25 (6) ◽  
pp. 096369351602500 ◽  
Author(s):  
Ruimin Fu ◽  
Mingfu Zhu
Keyword(s):  
Graphene Oxide ◽  
Drug Carrier ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
Co Precipitation ◽  
Ft Ir Spectroscopy

Nowadays, the hummers method for preparation of graphene oxide (GO) was improved. The grapheme oxide @ Fe3O4 magnetic nanocomposites were synthesized by co-precipitation method. After analysing the morphology and structure of obtained nanocomposites by X-ray diffraction (XRD), transmission electron microscope (TEM) and Fourier transform infrared (FT-IR) spectroscopy, the result was shown as follows. The particle size of Fe3O4 in nanocomposites is 30 nm. Many functional groups are found in grapheme oxide, and such groups could be used to bind with the drug. In the test for magnetic properties, the nanocomposites gathered rapidly in the vicinity of the permanent magnet. The nanocomposites, with high superparamagnetism, can be used in the following applications: drug targeting transports, drug carrier, and diagnosis assistant system.

Hypervalent organoselenium compounds stabilized by intramolecular coordination: synthesis and crystal structures

2019 ◽  
Vol 75 (1) ◽  
pp. 70-76 ◽  
Author(s):  
Krishnan Venkateshwaran ◽  
Rajesh Deka ◽  
Saravanan Raju ◽  
Harkesh B. Singh ◽  
Ray J. Butcher
Keyword(s):  
Intramolecular Interactions ◽  
X Ray Diffraction ◽  
Organoselenium Compounds ◽  
X Ray ◽  
Π Interactions ◽  
Ft Ir ◽  
Whole Molecule Disorder ◽  
Centrosymmetric Dimers ◽  
Ft Ir Spectroscopy

Two novel hypervalent selenium(IV) compounds stabilized by intramolecular interactions, namely 6-phenyl-6,7-dihydro-5H-2,3-dioxa-2aλ4-selenacyclopenta[hi]indene, C14H12O2Se, 14, and 5-phenyl-5,6-dihydro-4H-benzo[c][1,2]oxaselenole-7-carbaldehyde, C14H12OSe2, 15, have been synthesized by the reaction of 2-chloro-1-formyl-3-(hydroxymethylene)cyclohexene with in-situ-generated disodium diselenide (Na2Se2). The title compounds were characterized by FT–IR spectroscopy, ESI–MS, and single-crystal X-ray diffraction studies. For 14, there is whole-molecule disorder, with occupancies of 0.605 (10) and 0.395 (10), a double bond between C and Se, and the five-membered selenopentalene rings are coplanar. The packing is stabilized by π–π stacking interactions involving one of the five-membered Se/C/C/C/O rings [centroid–centroid (Cg...Cg) distance = 3.6472 (18) Å and slippage = 1.361 Å], as well as C—H...π interactions involving a C—H group and the phenyl ring. In addition, there are bifurcated C—H...Se,O interactions which link the molecules into ribbons in the c direction. For 15, the C—Se bond lengths are longer than those of 14. The two five-membered rings are coplanar. There are no π–π or C—H...π interactions; however, molecules are linked by C—H...O interactions into centrosymmetric dimers, with graph-set notation R 2 2(16).

Sign in / Sign up

Export Citation Format

Share Document