scholarly journals Exploring applications of Frozen Newton Method in the design of digital filter

Digital filters are popularly used in digital signal processing. The design of these filters can be done using different methods of which the rectangular window method and Frequency sampling methods are commonly used. Filter design using wavelet coefficients also shows better response. In this paper, we explore the use of the Frozen Newton method in improving the response of the filter designed using these methods. This iterative computing is applied considering the Taylor series expansion of the function up to the first order term called the Jacobian

1995 ◽  
Vol 74 (6) ◽  
pp. 2665-2684 ◽  
Author(s):  
Y. Kondoh ◽  
Y. Hasegawa ◽  
J. Okuma ◽  
F. Takahashi

1. A computational model accounting for motion detection in the fly was examined by comparing responses in motion-sensitive horizontal system (HS) and centrifugal horizontal (CH) cells in the fly's lobula plate with a computer simulation implemented on a motion detector of the correlation type, the Reichardt detector. First-order (linear) and second-order (quadratic nonlinear) Wiener kernels from intracellularly recorded responses to moving patterns were computed by cross correlating with the time-dependent position of the stimulus, and were used to characterize response to motion in those cells. 2. When the fly was stimulated with moving vertical stripes with a spatial wavelength of 5-40 degrees, the HS and CH cells showed basically a biphasic first-order kernel, having an initial depolarization that was followed by hyperpolarization. The linear model matched well with the actual response, with a mean square error of 27% at best, indicating that the linear component comprises a major part of responses in these cells. The second-order nonlinearity was insignificant. When stimulated at a spatial wavelength of 2.5 degrees, the first-order kernel showed a significant decrease in amplitude, and was initially hyperpolarized; the second-order kernel was, on the other hand, well defined, having two hyperpolarizing valleys on the diagonal with two off-diagonal peaks. 3. The blockage of inhibitory interactions in the visual system by application of 10-4 M picrotoxin, however, evoked a nonlinear response that could be decomposed into the sum of the first-order (linear) and second-order (quadratic nonlinear) terms with a mean square error of 30-50%. The first-order term, comprising 10-20% of the picrotoxin-evoked response, is characterized by a differentiating first-order kernel. It thus codes the velocity of motion. The second-order term, comprising 30-40% of the response, is defined by a second-order kernel with two depolarizing peaks on the diagonal and two off-diagonal hyperpolarizing valleys, suggesting that the nonlinear component represents the power of motion. 4. Responses in the Reichardt detector, consisting of two mirror-image subunits with spatiotemporal low-pass filters followed by a multiplication stage, were computer simulated and then analyzed by the Wiener kernel method. The simulated responses were linearly related to the pattern velocity (with a mean square error of 13% for the linear model) and matched well with the observed responses in the HS and CH cells. After the multiplication stage, the linear component comprised 15-25% and the quadratic nonlinear component comprised 60-70% of the simulated response, which was similar to the picrotoxin-induced response in the HS cells. The quadratic nonlinear components were balanced between the right and left sides, and could be eliminated completely by their contralateral counterpart via a subtraction process. On the other hand, the linear component on one side was the mirror image of that on the other side, as expected from the kernel configurations. 5. These results suggest that responses to motion in the HS and CH cells depend on the multiplication process in which both the velocity and power components of motion are computed, and that a putative subtraction process selectively eliminates the nonlinear components but amplifies the linear component. The nonlinear component is directionally insensitive because of its quadratic non-linearity. Therefore the subtraction process allows the subsequent cells integrating motion (such as the HS cells) to tune the direction of motion more sharply.


2012 ◽  
Vol 49 (3) ◽  
pp. 275-290
Author(s):  
Eric J. Balster ◽  
Francis D. Fradette ◽  
Frank A. Scarpino ◽  
Kerry L. Hill

Polyphase filter design is a common subject studied in discrete systems analysis and digital signal processing (DSP) courses. However, the classic z-domain analysis, utilizing the noble identities, gives a conclusion to the true physical structures of polyphase filters which may not be obvious to many students. The proposed time-domain analysis provides a more straightforward development of polyphase implementation of interpolation and decimation functions, and hopes to provide students with a more visual representation of the polyphase interpolation and decimation processes. Results from a student survey show that over 73% of students believe that the proposed polyphase analysis strengthened their understanding of polyphase filters, and over 71% would prefer to use the proposed method over the traditional z-domain analysis when explaining polyphase filters to others.


Author(s):  
Hemavathy P.R. ◽  
Mohamed Shuaib Y ◽  
S.K. Lakshmanaprabu

In this paper, an Internal model Controller (IMC) based PID with fractional filter for a first order plus time delay process is proposed. The structure of the controller has two parts, one is integer PID controller part cascaded with fractional filter. The proposed controller has two tuning factors λ, filter time constant and a, fractional order of the filter. In this work, the two factors are decided in order to obtain low Integral Time Absolute Error (ITAE). The effectiveness of the proposed controller is studied by considering a non linear (hopper tank) process. The experimental set up is fabricated in the laboratory and then data driven model is developed from the experimental data. The non linear process model is linearised using piecewise linearization and two linear regions are obtained. At each operating point, linear first order plus dead time model is obtained and the controller is designed for the same. To show the practical applicability, the proposed controller is implemented for the proposed experimental laboratory prototype.


Author(s):  
A Murali, K Hari Kishore

Lately, channel is one of the key components in signal handling applications. Among different channels, Finite Impulse Response (FIR) channel is broadly utilized in Digital Signal Processing (DSP) applications for shifting/denoising. For enormous scope coordination (VLSI) execution of fixed-coefficient FIR channels, huge asset used customary multipliers that can be acknowledged by a solitary steady multiplication (SCM) and numerous consistent augmentations (MCM) square utilizing movement and include/take away tasks. For a proficient execution, a variable size apportioning approach is proposed in direct structure channel structure that devours less zone and 11% of decrease in basic way delay, 40% decrease of all out force utilization, 15% decrease of zone delay product(ADP), 52% decrease of vitality delay product(EDP), and 42% decrease of intensity territory product(PAP), on a normal, over the cutting edge techniques. In this paper, a state choice tree calculation is proposed to decrease unpredictability in channel tap cells of variable size apportioning approach. The proposed plot creates a choice tree to perform move and expansion/deduction and aggregation dependent on the consolidated SCM/MCM approach. This plan diminishes the quantity of postpone registers required for tab cells. The proposed snake design will be actualized in Xilinx Zed, Spartan and Virtex devices and Area, power and speed investigation will be performed.


2007 ◽  
Vol DMTCS Proceedings vol. AH,... (Proceedings) ◽  
Author(s):  
Svante Janson

International audience We study the space requirements of a sorting algorithm where only items that at the end will be adjacent are kept together. This is equivalent to the following combinatorial problem: Consider a string of fixed length n that starts as a string of 0's, and then evolves by changing each 0 to 1, with the n changes done in random order. What is the maximal number of runs of 1's? We give asymptotic results for the distribution and mean. It turns out that, as in many problems involving a maximum, the maximum is asymptotically normal, with fluctuations of order $n^{1/2}$, and to the first order well approximated by the number of runs at the instance when the expectation is maximized, in this case when half the elements have changed to 1; there is also a second order term of order $n^{1/3}$. We also treat some variations, including priority queues and sock-sorting.


2000 ◽  
Vol 14 (19n20) ◽  
pp. 2109-2116
Author(s):  
N. PANCHAPAKESAN

The nature of the transition from the quantum tunneling regime to the thermal hopping regime has importance in the study of condensed matter physics and cosmological phase transitions. It may also be of significance in collapse from quantum state to a classical state due to measurement (or loss of coherence due to some other process). We study this transition analytically in scalar field theory with a fourth order term. We obtain analytic bounce solutions which correctly give the action in thin and thick wall limits of the potential. We find that the transition is of the second order for the case of thick wall while it seems to be of first order for the case of thin wall.


2021 ◽  
Vol 5 (2) ◽  
pp. 579-583
Author(s):  
Muhammad Abdullahi ◽  
Bashir Sule ◽  
Mustapha Isyaku

This paper is aimed at deriving a 2-point zero stable numerical algorithm of block backward differentiation formula using Taylor series expansion, for solving first order ordinary differential equation. The order and zero stability of the method are investigated and the derived method is found to be zero stable and of order 3. Hence, the method is suitable for solving first order ordinary differential equation. Implementation of the method has been considered


2021 ◽  
Vol 18 (2) ◽  
pp. 226-242
Author(s):  
Valerii Samoilenko ◽  
Yuliia Samoilenko

The paper deals with constructing an asymptotic one-phase soliton-like solution to the Benjamin--Bona--Mahony equation with variable coefficients and a strong singularity making use of the non-linear WKB technique. The influence of the small-parameter value on the structure and the qualitative properties of the asymptotic solution, as well as the accuracy with which the solution satisfies the considerable equation, have been analyzed. It was demonstrated that due to the strong singularity, it is possible to write explicitly not only the main term of the asymptotics but at least its first-order term.


Sign in / Sign up

Export Citation Format

Share Document