Industri Perkebunan Kelapa Sawit dalam Konteks Pembangunan Berkelanjutan

Agrotek ◽  
2018 ◽  
Vol 3 (1) ◽  
Author(s):  
Josina Waromi

<p><em>Palm Oil is versatile crops. In general, most of products coming from fresh fruit bunch (FFB) producing crude palm oil (CPO) and crude palm kernel oil (CPKO) are used for food, oleo chemical and biofuel. Besides that, its leaves and empty fruit bunch can be used for natural fertilizer, pulp and paper. Palm oil crops also give benefits for countries that produce palm oil crops. For example, in Indonesia, palm oil crops not only have numerous contributions to gross domestic products (GDP) but also it creates employment, increases income level of farmer� and provides basic amenities and infrastructure in rural area where the oil palm plantation there.�</em><em>However, palm oil crops have some negative impacts for environment. The expanse of oil palm plant

Agrotek ◽  
2018 ◽  
Vol 3 (1) ◽  
Author(s):  
Yaved Muyan

<p><em>Palm Oil is versatile crops. In general, most of products coming from fresh fruit bunch (FFB) producing crude palm oil (CPO) and crude palm kernel oil (CPKO) are used for food, oleo chemical and biofuel. Besides that, its leaves and empty fruit bunch can be used for natural fertilizer, pulp and paper. Palm oil crops also give benefits for countries that produce palm oil crops. For example, in Indonesia, palm oil crops not only have numerous contributions to gross domestic products (GDP) but also it creates employment, increases income level of farmer� and provides basic amenities and infrastructure in rural area where the oil palm plantation there.�</em><em>However, palm oil crops have some negative impacts for envi


2020 ◽  
Vol 11 (3) ◽  
pp. 10148-10160

Oil palm (Elaeis guineensis Jacq) is a part of the family of Arecaceae, which originated from West Africa. Oil palm can be grown in the tropics of Asia, Africa, and Central and South America. Palm oil produces two types of oil: Crude Palm Oil (CPO) and Palm Kernel Oil (PKO). Indonesia’s CPO production reaches 49 million tonnes in 2020. This production produces around 35-40% of waste. Fresh Fruit Bunch (FFB) is extracted into Crude Palm Oil (CPO) and Palm Kernel Oil (PKO), which produce waste such as Palm Oil Mill Effluent (POME), Empty Fruit Bunch (EFB), Mesocarp Fiber (MF), Palm Kernel Shell (PKS) and Palm Kernel Meal (PKM). Palm oil production increases every year, which causes the waste from the industry to increase too. Palm oil waste still has chemical content that is good enough to be utilized. The study was conducted online at Google Scholar and PubMed by reviewing literature from domestic and international journals and research reports. The results showed that each waste contains different content, including carbohydrates, protein, fat, lignin, cellulose, mannose, and others. This waste has also been used in various fields. This waste has also been used for livestock, fuel, and raw materials.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Farhatun Najat Maluin ◽  
Mohd Zobir Hussein ◽  
Nor Azah Yusof ◽  
Sharida Fakurazi ◽  
Zainol Maznah ◽  
...  

AbstractThe nanoformulations of pesticides have shown great interest from many parties due to their slow release capability and site-specific delivery. Hence, in this work, a new nanoformulation of a fungicide, namely chitosan-hexaconazole nanoparticles with a mean diameter size of 18 nm was subjected to the residual analysis on oil palm tissue, leaf and palm oil (crude palm oil and crude palm kernel oil) using a quick, easy, cheap, effective, rugged and safe (QuEChERS) method coupled with the gas chromatography–micro electron capture detector (GC–µECD). The chitosan-hexaconazole nanoparticles were applied using the trunk injection method at 4.5 g a.i./palm (standard single dose) and 9.0 g a.i./palm (double dose). The fungicide residue was analyzed at 0 (6 h after application), 1, 3, 7, 14, 30, 60, 90, and 120 days after treatment. The palm oil matrices; the crude palm oil (CPO) and crude palm kernel oil (CPKO) were found to be residue-free. However, it was observed that high accumulation of the fungicide in the stem tissue and leaf after the treatment using the chitosan-hexaconazole nanoparticles, which is good for better bioavailability for the treatment of the fungi, Ganoderma boninense. The dissipation kinetic at double dose treatment in the tissue and leaf was found to govern by the second-order kinetic with half-lives (t1/2) of 383 and 515 days, respectively.


Fuel ◽  
2021 ◽  
Vol 305 ◽  
pp. 121569
Author(s):  
Chao Jin ◽  
Xin Liu ◽  
Tianyun Sun ◽  
Jeffrey Dankwa Ampah ◽  
Zhenlong Geng ◽  
...  

2021 ◽  
Author(s):  
Nick Pasiecznik

Abstract E. guineensis, the oil palm or African oil palm, is native to equatorial Africa, although the only other species in the genus (E. oleifera) is indigenous to South and Central America. E. guineensis, however, is the major economic species: fruits of E. oleifera have a much lower oil content and are used only locally (Westphal and Jansen, 1989). However, E. guineensis was introduced into South America during the time of the slave trade, and naturalized groves are reported in coastal areas of Brazil near Bélem. In the mid-1800s it was introduced to South-East Asia via the Botanic Gardens in Bogor, Indonesia. The first oil-palm estates in Sumatra (since 1911) and Malaysia (since 1917) used plant material from second- and third-generation descendants of the original Bogor palms, from which one of the breeding populations, the Deli Dura, is derived (Westphal and Jansen, 1989). After soyabean, E. guineensis is the second most important crop worldwide for the supply of edible vegetable oil. Palm oil kernel, for example, is a major agricultural export from Malaysia, and South-East Asia is the main area of production.E. guineensis yields two types of oil: palm oil from the fleshy mesocarp, and palm-kernel oil from the kernel, in a volume ratio 10:1. Most palm oil is used in food preparation (margarines, and industrial frying oils used to prepare snack foods, etc.). Palm-kernel oil is similar in composition and properties to coconut oil, and is used in confectionery, where its higher melting point is particularly useful. It is also used in the manufacture of lubricants, plastics, cosmetics and soaps. The oil palm is a monoecious, erect, single-stemmed tree usually 20-30 m high. The root system is shallow and adventitious, forming a dense mat in the top 35 cm of the soil. The main stem is cylindrical, up to 75 cm diameter. E. guineensis palm fronds are not as suitable for thatching as other palm species, as the leaflets attach to the rachis at two angles. The oil palm is indigenous to the lowland humid tropics, and thrives on a good moisture supply and relatively open conditions. It can tolerate fluctuating water-tables with periods of standing water, although continuously flooded conditions are unsuitable. Sites often selected as suitable for oil palm are swamps, riverbanks, or sites considered too moist for tropical rain forest trees. Rainfall is often the major factor limiting production in plantations: highest yields occur where rainfall is evenly distributed throughout the year, with an optimum of 150 mm per month (Westphal and Jansen, 1989). Oil palms can grow on a variety of soil types, from sandy soils to lateritic red and yellow podzols, young volcanic soils, alluvial clays and peat soils; water-holding capacity appears to be the most important soil criterion. It is a demanding crop in terms of soil nutrients. The oil palm also has potential for incorporation into agroforestry practices. Traditional oil palm management in some areas of West Africa often incorporated both pure oil palm groves (perhaps selectively retained), scattered oil palms within temporary fields, and unexploited oil palms in mixed forest (Gupta, 1993). Harvesting of fruits usually starts about 2½ years after field planting; bunches ripen throughout the year and so harvesting usually takes place at intervals of 2 to 3 weeks in any particular area. Because oil palm is so responsive to environmental conditions, yields may vary greatly. However, over the lifetime of a palm tree, yields generally rise to a maximum in the first 6-8 years (after field planting), and will subsequently decline slowly. In Malaysia and Sumatra, well-managed plantations yield between 24 and 32 tonnes/hectare of fruit bunches; the oil yield from this will be between 4.8 and 7 tonnes/hectare. Oil palm plantations are often regarded as a better use of the land than annual food crops in humid tropical areas where soils are prone to leaching: the plantations provide continuous ground cover, and the palm canopy helps protect against soil erosion. Oil palm stems are increasingly used as a raw material for paper and composite board production. This area has big prospects in wood-based industries. It is recommended that more research is undertaken into the properties and utilization. Propagation techniques, the management of pests and diseases, and genetic resources are other areas in which studies could usefully be undertaken.


2008 ◽  
Vol 25 (No. 4) ◽  
pp. 174-181 ◽  
Author(s):  
K.G. Berger

The results of nutritional research on fatty acids have led to the recommendation that the level of trans-fatty acids in foods (the products of partial hydrogenation of oils) should be reduced as far as possible. Palm oil and palm kernel oil are readily available and economical sources of solid fat. Formulae using oils to make fats for the main types of food products are reviewed.


2019 ◽  
Vol 30 (1) ◽  
pp. 141-149
Author(s):  
MA Awal ◽  
SS Tabriz

At present oil palm growers are facing problem to extract crude palm oil in Bangladesh. Processing of palm oil categorized into various forms but basic processing stages are essentially the same including harvesting, sterilization, bunch stripping, digestion, crushing, clarification and drying. Extracting of palm oil is very difficult by traditional method and oil recovery rate is very low. Although mechanical processing is costly but produces good quality Crude Palm Oil (CPO) and oil recovery rate is high. An electric motor operated oil palm crusher was designed and developed and tested in laboratory under the Department of Farm Power and Machinery, Bangladesh Agricultural University, Mymensingh for processing of crude palm oil from fresh fruit bunch. The crusher was designed by using Auto-Cad software. It was fabricated according to design parameters. The major parts of the crusher were screw shaft, cylinder, hopper, hollow bars, pressure case cap, jamnut and frame which were fabricated by mild steel (MS), ball bearing, gear and pinion, line and idle shaft and spring were fabricated by carbon steel (CS) whereas driver and driven pulley were fabricated by cast iron(CI). Crusher was mounted on the frame. A 9 hp electric motor was used as a power source. Crusher was tested after fabrication and 3000 gm fresh fruits were used. About 700 gm crude palm oil, 800 gm oil cake, 1400 gm skum were collected from 2700 gm pretreated fruits. The crushing capacity and crude oil percentage of the crusher was 6.49 kg/hr and 25.93%, respectively. Rotating speed of screw was 40 rpm for smooth running. The weight of crusher was only 70 kg which is easy to operate by single person. The developed oil palm crusher may fulfill the demand of smallholder growers to extract oil from fresh fruit bunches. Progressive Agriculture 30 (1): 141-149, 2019


1995 ◽  
Vol 61 (3) ◽  
pp. 535-542 ◽  
Author(s):  
G M Wardlaw ◽  
J T Snook ◽  
S Park ◽  
P K Patel ◽  
F C Pendley ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document