Numerical Simulation of the Flow around the Ducted Fan of a Quadcopter and Determination of Its Thrust Characteristics in Various Flight Modes

2021 ◽  
Vol 64 (2) ◽  
pp. 224-232
Author(s):  
P. V. Denisenko ◽  
P. S. Chernyshov ◽  
K. N. Volkov ◽  
L. O. Vokin
Keyword(s):  
Numerical Simulation ◽  
Ducted Fan ◽  
Thrust Characteristics

scholarly journals Development of an Ultralight with a Ducted Fan

10.14311/1624 ◽  
2012 ◽  
Vol 52 (5) ◽  
Author(s):  
Jiří Brabec ◽  
Martin Helmich
Keyword(s):  
Experimental Determination ◽  
Specific Procedure ◽  
Ducted Fan ◽  
Thrust Characteristics ◽  
Propulsion Unit

This paper introduces the UL-39 project, an ultralight aircraft with a ducted fan, and some of the problems that have arisen in the course of its development. Several problems with the design of a non-traditional aircraft of this kind are mentioned, e.g. the design of the airframe, and the design of the propulsion unit. The paper describes the specific procedure for determining the basic thrust characteristics of this unusual aircraft concept, and also the experimental determination of these characteristics. Further options for applying the experience gained during the work, and the futurefocus of work on these issues, are outlined at the end of the paper.

scholarly journals Optimal design of the solar tracking system of parabolic trough concentrating collectors

2020 ◽  
Vol 15 (4) ◽  
pp. 613-619
Author(s):  
Li Kong ◽  
Yunpeng Zhang ◽  
Zhijian Lin ◽  
Zhongzhu Qiu ◽  
Chunying Li ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Solar Radiation ◽  
Tracking System ◽  
Low Cost ◽  
Parabolic Trough ◽  
The North ◽  
Tracking Mode ◽  
Solar Tracking ◽  
East West

Abstract The present work aimed to select the optimum solar tracking mode for parabolic trough concentrating collectors using numerical simulation. The current work involved: (1) the calculation of daily solar radiation on the Earth’s surface, (2) the comparison of annual direct solar radiation received under different tracking modes and (3) the determination of optimum tilt angle for the north-south tilt tracking mode. It was found that the order of solar radiation received in Shanghai under the available tracking modes was: dual-axis tracking > north-south Earth’s axis tracking > north-south tilt tracking (β = 15°) > north-south tilt tracking (β = 45) > north-south horizontal tracking > east-west horizontal tracking. Single-axis solar tracking modes feature simple structures and low cost. This study also found that the solar radiation received under the north-south tilt tracking mode was higher than that of the north-south Earth’s axis tracking mode in 7 out of 12 months. Therefore, the north-south tilt tracking mode was studied separately to determine the corresponding optimum tilt angles in Haikou, Lhasa, Shanghai, Beijing and Hohhot, respectively, which were shown as follows: 18.81°, 27.29°, 28.67°, 36.21° and 37.97°.

scholarly journals Determination of Long Horizontal Borehole Height in Roofs and its Application to Gas Drainage

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2647
Author(s):  
Gang Wang ◽  
Cheng Fan ◽  
Hao Xu ◽  
Xuelin Liu ◽  
Rui Wang
Keyword(s):  
Numerical Simulation ◽  
Theoretical Model ◽  
Fracture Zone ◽  
Coalbed Methane ◽  
High Efficiency ◽  
Gas Drainage ◽  
Methane Drainage ◽  
Working Face ◽  
Variation Characteristics

Accurately determining the height of the gas-guiding fracture zone in the overlying strata of the goaf is the key to find the height of the long horizontal borehole in the roof. In order to determine the height, in this study we chose the 6306 working face of Tangkou Coal Mine in China as a research example and used both the theoretical model and discrete element method (DEM) numerical simulation to find the height of the gas-guiding fracture zone and applied the height to drill a long horizontal borehole in the roof of the 6303 working face. Furthermore, the borehole was utilized to deep into the roof for coalbed methane drainage and the results were compared with conventional gas drainage measures from other aspects. The height of the gas-guiding fracture zone was found to be 48.57 m in theoretical model based on the bulk coefficient and the void ratio and to be 51.19 m in the DEM numerical simulation according to the temporal and spatial variation characteristics of porosity. Taking both the results of theoretical analysis and numerical simulation into consideration, we determined that gas-guiding fracture zone is 49.88 m high and applied it to drill a long horizontal borehole deep into the roof in the 6303 working face field. Compared with conventional gas drainage measures, we found that the long horizontal borehole has the high stability, high efficiency and strong adaptability for methane drainage.

scholarly journals Numerical simulation of the process of sensorless determination of the mechanical power developed by a torque motor

2021 ◽  
Vol 2032 (1) ◽  
pp. 012088
Author(s):  
D A Vyrykhanov ◽  
G G Ugarov ◽  
V I Moshkin ◽  
I S Korobeynikov ◽  
F E Lappi
Keyword(s):  
Numerical Simulation ◽  
Mechanical Power
Sign in / Sign up

Export Citation Format

Share Document