scholarly journals Water barrier properties of carboxymethyl cellulose/halloysite nanotubes nanocomposite to be used in food packaging applications

2021 ◽  
Vol 24 (02) ◽  
Author(s):  
S.N. Wijesooriya ◽  
N. Adassooriya
Keyword(s):  
Water Vapor ◽  
Carboxymethyl Cellulose ◽  
Food Packaging ◽  
Water Solubility ◽  
Methyl Cellulose ◽  
Barrier Properties ◽  
Halloysite Nanotubes ◽  
Packaging Material ◽  
Nanocomposite Films ◽  
Moisture Uptake

In this research, novel carboxymethyl cellulose (CMC) based nanocomposite film containing 5%wt of halloysite nanotubes (HNT) was fabricated via solvent casting method as a potential biodegradable packaging material. The performances of the nanocomposite packaging material was investigated by assessing the moisture content, moisture uptake, water solubility, water vapor barrier properties and opacity. The incorporation of 5%wt HNT into the film remarkably reduced the moisture uptake by ∼ 28.01% at 97% RH and 31.08% at 40% RH. Water permeability value of CMC/HNT film showed as 7.08 ± 0.26 × 10−11 gm/m2Pas at freezing, 3.37 ± 0.33 × 10−11 gm/m2Pas at refrigeration and 1.14 ± 0.00 × 10−11 gm/m2Pas at ambient environmental conditions respectively. Subsequent to the thermal annealing process, the water vapor permeation ability was drastically declined in the HNT added nanocomposite films at all three different conditions (freezing, refrigeration and ambient) due to enhancing the crystalline structure. Furthermore, the addition of nanofillers into the polymer matrix significantly induced the UV blocking property of the film. These findings disclosed that prepared CMC/5%HNT nanocomposite films can be a potential food packaging material.Keywords: barrier properties, carboxy methyl cellulose, halloysite nanotubes

Physical and Barrier Properties of Polylactic Acid/Halloysite Nanotubes-Titanium Dioxide Nanocomposites

2021 ◽  
Vol 1021 ◽  
pp. 280-289
Author(s):  
Abdulkader M. Alakrach ◽  
Awad A. Al-Rashdi ◽  
Mohamed Khalid Al-Omar ◽  
Taha M. Jassam ◽  
Sam Sung Ting ◽  
...  
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Halloysite Nanotubes ◽  
Nanocomposite Films ◽  
Vapor Permeability ◽  
Water Contact ◽  
Film Density

In this study, PLA/TiO2 and PLA/HNTs-TiO2 nanocomposites films were fabricated via solution casting method. By testing the film density, solubility, water contact angle and water vapor permeability, the PLA nanocomposite films, the comprehensive performances of the nanocomposites were analysed. The outcomes demonstrated that maximum film density of PLA/TiO2 and PLA/HNTs-TiO2 nanocomposites films increased gradually with the increasing of nanofiller loadings. Moreover, the incorporation of TiO2 and HNTs-TiO2 significantly decreased the water vapor transmittance rate of the nanocomposite films with a slight priority to the addition of HNTs-TiO2, the water solubility was significantly improved with the addition of both nanofillers. Furthermore, the barrier properties were developed with the addition of both TiO2 and HNTs-TiO2 especially after the addition of low nanofiller loadings. Overall, the performance of the PLA/HNTs-TiO2 nanocomposite films was better than that PLA/TiO2 film. Nevertheless, both of the PLA nanocomposite samples achieved the requests of food packaging applications.

scholarly journals Preparation and Characterization of Edible Dialdehyde Carboxymethyl Cellulose Crosslinked Feather Keratin Films for Food Packaging

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 158
Author(s):  
Yao Dou ◽  
Liguang Zhang ◽  
Buning Zhang ◽  
Ming He ◽  
Weimei Shi ◽  
...  
Keyword(s):  
Water Vapor ◽  
Carboxymethyl Cellulose ◽  
Food Packaging ◽  
Light Transmission ◽  
Value Added ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Edible Films ◽  
Vapor Permeability ◽  
Feather Keratin

The development of edible films based on the natural biopolymer feather keratin (FK) from poultry feathers is of great interest to food packaging. Edible dialdehyde carboxymethyl cellulose (DCMC) crosslinked FK films plasticized with glycerol were prepared by a casting method. The effect of DCMC crosslinking on the microstructure, light transmission, aggregate structure, tensile properties, water resistance and water vapor barrier were investigated. The results indicated the formation of both covalent and hydrogen bonding between FK and DCMC to form amorphous FK/DCMC films with good UV-barrier properties and transmittance. However, with increasing DCMC content, a decrease in tensile strength of the FK films indicated that plasticization, induced by hydrophilic properties of the DCMC, partly offset the crosslinking effect. Reduction in the moisture content, solubility and water vapor permeability indicated that DCMC crosslinking slightly reduced the moisture sensitivity of the FK films. Thus, DCMC crosslinking increased the potential viability of the FK films for food packaging applications, offering a value-added product.

Enhanced functional properties of biodegradable Polyvinyl alcohol /carboxymethyl cellulose (PVA/CMC) composite films reinforced with L-alanine surface modified CuO nanorods

2021 ◽  
Author(s):  
Yamanappagouda Amaregouda ◽  
Kantharaju Kamanna ◽  
Tilak Gasti ◽  
Vijay Kumbar
Keyword(s):  
Polyvinyl Alcohol ◽  
Carboxymethyl Cellulose ◽  
Food Packaging ◽  
Composite Films ◽  
Nanocomposite Films ◽  
Soil Burial ◽  
High Antibacterial Activity ◽  
Active Food Packaging ◽  
Surface Modified ◽  
Cuo Nanorods

Abstract Herein, we described novel biogenic preparation of the CuO nanorods and its surface modification with L-alanine amino acid accelerated by microwave irradiation. The effect of surface functionalized CuO nanorods on the polyvinyl alcohol/carboxymethyl cellulose film physico-mechanical properties were investigated through various characterization techniques. The tensile strength was improved from 28.58 ± 0.73 MPa to 43.40 ± 0.93 MPa, UV shielding ability and barrier to the water vapors were highly enhanced when PVA/CMC matrices filled with 8 wt% of CuO-L-alanine. In addition, the prepared films exhibited acceptable overall migration limit and readily undergoes soil burial degradation. Nevertheless, CuO-L-alanine incorporated films showed potent antioxidant activity against DPPH radicals and had high antibacterial activity against Staphylococcus aureus and Escherichia coli, and antifungal activity against Candida albicans and Candida tropicalis. Furthermore, the nanocomposite films showed negligible cytotoxic effect on HEK293 and Caco-2 cell lines. In these contexts, the developed nanocomposite films can be implementing as an active food packaging material.

scholarly journals Synergistic Effect of Halloysite Nanotubes and Glycerol on the Physical Properties of Fish Gelatin Films

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1258 ◽  
Author(s):  
Xiaohu Qiang ◽  
Songyi Zhou ◽  
Zhuo Zhang ◽  
Qiling Quan ◽  
Dajian Huang
Keyword(s):  
Water Resistance ◽  
Water Solubility ◽  
Composite Films ◽  
Halloysite Nanotubes ◽  
Light Transmittance ◽  
Fish Gelatin ◽  
Moisture Uptake ◽  
Casting Method ◽  
Gelatin Films ◽  
Light Region

Fish gelatin (FG)/glycerol (GE)/halloysite (HT) composite films were prepared by casting method. The morphology of the composite films was observed by scanning electron microscopy (SEM). The effects of HT and GE addition on the mechanical properties, water resistance and optical properties of the composites were investigated. Results showed that with increasing GE content, the elongation at composite breaks increased significantly, but their tensile strength (TS) and water resistance decreased. SEM results showed that GE can partly promote HT dispersion in composites. TS and water resistance also increased with the addition of HTs. Well-dispersed HTs in the FG matrix decreased the moisture uptake and water solubility of the composites. All films showed a transparency higher than 80% across the visible light region (400–800 nm), thereby indicating that light transmittance of the resulting nanocomposites was slightly affected by GE and HTs.

Natural paper-layered composites with air barrier properties achieved by coating with bacterial cellulose

BioResources ◽  
2020 ◽  
Vol 15 (4) ◽  
pp. 9569-9574
Author(s):  
Marta Kaźmierczak ◽  
Tomasz P. Olejnik ◽  
Magdalena Kmiotek
Keyword(s):  
Bacterial Cellulose ◽  
Food Packaging ◽  
Barrier Properties ◽  
Cellulose Fibers ◽  
Packaging Material ◽  
Layered Composites ◽  
Chemical Additives ◽  
Cellulosic Fibers ◽  
Biodegradable Packaging ◽  
Cellulose Pulp

In some respects the safest food packaging material is paper that is completely free of chemical additives, made only from primary cellulosic fibers. There is no information in the literature on giving paper barrier properties using nanocellulose without any additives, especially bacterial cellulose, by applying a coating to a fibrous semi-product. In order to prepare paper-layered composites, paper sheets made of beaten or non-beaten softwood or hardwood cellulose pulp, or their 50/50 (wt./wt.) mix, were used in the experiment. After the application of bacterial cellulose onto the sheets, the paper became completely impermeable to air, which means that fine microbial fibers had filled the voids (pores) between plant cellulose fibers. The results of the experiment could be regarded as a perfect, biodegradable packaging material.

scholarly journals Release of Graphene and Carbon Nanotubes from Biodegradable Poly(Lactic Acid) Films during Degradation and Combustion: Risk Associated with the End-of-Life of Nanocomposite Food Packaging Materials

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2346 ◽  
Author(s):  
Stanislav Kotsilkov ◽  
Evgeni Ivanov ◽  
Nikolay Vitanov
Keyword(s):  
Risk Assessment ◽  
Carbon Nanotubes ◽  
Lactic Acid ◽  
Food Packaging ◽  
Safety Concern ◽  
Barrier Properties ◽  
Nanocomposite Films ◽  
Poly Lactic Acid ◽  
Qualitative Risk Assessment ◽  
The Matrix

Nanoparticles of graphene and carbon nanotubes are attractive materials for the improvement of mechanical and barrier properties and for the functionality of biodegradable polymers for packaging applications. However, the increase of the manufacture and consumption increases the probability of exposure of humans and the environment to such nanomaterials; this brings up questions about the risks of nanomaterials, since they can be toxic. For a risk assessment, it is crucial to know whether airborne nanoparticles of graphene and carbon nanotubes can be released from nanocomposites into the environment at their end-life, or whether they remain embedded in the matrix. In this work, the release of graphene and carbon nanotubes from the poly(lactic) acid nanocomposite films were studied for the scenarios of: (i) biodegradation of the matrix polymer at the disposal of wastes; and (ii) combustion and fire of nanocomposite wastes. Thermogravimetric analysis in air atmosphere, transmission electron microscopy (TEM), atomic force microscopy (AFM) and scanning electron microscope (SEM) were used to verify the release of nanoparticles from nanocomposite films. The three factors model was applied for the quantitative and qualitative risk assessment of the release of graphene and carbon nanotubes from nanocomposite wastes for these scenarios. Safety concern is discussed in respect to the existing regulations for nanowaste stream.

scholarly journals Cellulose Nanocrystal Reinforced Chitosan Based UV Barrier Composite Films for Sustainable Packaging

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 202 ◽  
Author(s):  
Mithilesh Yadav ◽  
Kartik Behera ◽  
Yen-Hsiang Chang ◽  
Fang-Chyou Chiu
Keyword(s):  
Food Industry ◽  
Water Solubility ◽  
Moisture Absorption ◽  
Composite Films ◽  
Barrier Properties ◽  
Cellulose Nanocrystal ◽  
Nanocomposite Films ◽  
Green Composite ◽  
Vapor Permeation ◽  
Sustainable Packaging

In this study, green composite films based on cellulose nanocrystal/chitosan (CNC/CS) were fabricated by solution casting. FTIR, XRD, SEM, and TEM characterizations were conducted to determine the structure and morphology of the prepared films. The addition of only 4 wt.% CNC in the CS film improved the tensile strength and Young’s modulus by up to 39% and 78%, respectively. Depending on CNC content, the moisture absorption decreased by 34.1–24.2% and the water solubility decreased by 35.7–26.5% for the composite films compared with neat CS film. The water vapor permeation decreased from 3.83 × 10−11 to 2.41 × 10−11 gm−1 s−1Pa−1 in the CS-based films loaded with (0–8 wt.%) CNC. The water and UV barrier properties of the composite films showed better performance than those of neat CS film. Results suggested that CNC/CS nanocomposite films can be used as a sustainable packaging material in the food industry.

Preparation and Properties Research of Modified Nano-ZnO/HDPE Composite Films

2010 ◽  
Vol 174 ◽  
pp. 450-453 ◽  
Author(s):  
Ya Na Li ◽  
Kyong Ho Cha ◽  
Qing Hui He
Keyword(s):  
Tensile Strength ◽  
Water Vapor ◽  
Zno Nanoparticles ◽  
Composite Films ◽  
Barrier Properties ◽  
Nanocomposite Films ◽  
Melt Blending ◽  
Molding Process ◽  
Nano Zno ◽  
Modified Zno Nanoparticles

Nanocomposite films of ZnO/HDPE were prepared via melt blending and hot compression molding process. The morphology, DSC, mechanical and barrier properties of the films were investigated. The results showed that a better dispersion of modified nanoparticles at content of 0.5wt% in HDPE matrix occurred and the improvement of the HDPE films in tensile strength and tear strength was achieved by incorporating modified-ZnO nanoparticles up to 0.5wt% in contrast with the original nano-ZnO/HDPE composite films. It was also found that the addition of modified nano-ZnO to neat HDPE caused to increase crystallinity and enhance the barrier property of nano-ZnO/HDPE composite films against water vapor and oxygen.

scholarly journals Preparation and Characterization of Carboxymethyl Cellulose-Based Bioactive Composite Films Modified with Fungal Melanin and Carvacrol

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 499
Author(s):  
Łukasz Łopusiewicz ◽  
Paweł Kwiatkowski ◽  
Emilia Drozłowska ◽  
Paulina Trocer ◽  
Mateusz Kostek ◽  
...  
Keyword(s):  
Water Vapour ◽  
Carboxymethyl Cellulose ◽  
Food Packaging ◽  
Antioxidant Activities ◽  
Antioxidant Properties ◽  
Composite Films ◽  
Barrier Properties ◽  
Good Potential ◽  
Fungal Melanin ◽  
Spectroscopy Studies

Preparation of biodegradable packaging materials and valorisation of food industry residues to achieve “zero waste” goals is still a major challenge. Herein, biopolymer-based (carboxymethyl cellulose—CMC) bioactive films were prepared by the addition, alone or in combination, of carvacrol and fungal melanin isolated from champignon mushroom (Agaricus bisporus) agro-industrial residues. The mechanical, optical, thermal, water vapour, and UV-Vis barrier properties were studied. Fourier-transform infrared (FT-IR) spectroscopy studies were carried out to analyse the chemical composition of the resulting films. Antibacterial, antifungal, and antioxidant activities were also determined. Both CMC/melanin and CMC/melanin/carvacrol films showed some antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Candida albicans. The addition of melanin increased the UV-blocking, mechanical, water vapour barrier, and antioxidant properties without substantially reducing the transparency of the films. The addition of carvacrol caused loss of transparency, however, composite CMC/melanin/carvacrol films showed excellent antioxidant activity and enhanced mechanical strength. The developed bioactive biopolymer films have a good potential to be green bioactive alternatives to plastic films in food packaging applications.

Sign in / Sign up

Export Citation Format

Share Document