NJZ BRASCO

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
New Jersey ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Dimensional Change ◽  
Heat Treating ◽  
Powder Metal ◽  
Cobalt Alloy ◽  
Copper Zinc

Abstract NJZ BRASCO is a powder metallurgy copper-zinc-cobalt alloy designed for use in the as-sintered condition. It provides sintered parts with substantially higher strength and hardness than conventional 70 copper/30 zinc brass P/M parts. Also, it undergoes significantly less dimensional change than 70/30 brass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and powder metal forms. Filing Code: Cu-293. Producer or source: New Jersey Zinc Company.

IN-861

Alloy Digest ◽  
1974 ◽  
Vol 23 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Elemental Powder ◽  
Powder Metal ◽  
International Nickel Company ◽  
Metallurgy Steel

Abstract IN-861 is a mixed elemental powder metallurgy steel designed for use in the as-sintered condition. It achieves its good mechanical properties by hardening during normal cooling in most commercial sintering furnaces. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on heat treating, machining, and powder metal forms. Filing Code: SA-308. Producer or source: International Nickel Company Inc..

ANCORSTEEL 4300

Alloy Digest ◽  
2009 ◽  
Vol 58 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cost Effective ◽  
Heat Treating ◽  
Effective Alternative ◽  
Powder Metal ◽  
Secondary Processing ◽  
Cost Effective Alternative

Abstract Ancorsteel 4300 alloy ferrous powder simulates wrought steel compositions and is a cost-effective alternative to alloys requiring secondary processing. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating and powder metal forms. Filing Code: SA-611. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 4600V

Alloy Digest ◽  
2012 ◽  
Vol 61 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Metal Powder ◽  
Heat Treating ◽  
Powder Metal

Abstract Ancorsteel 4600V alloy is a water-atomized low-alloy sinter-hardening metal powder. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating and powder metal forms. Filing Code: SA-655. Producer or source: Hoeganaes Corporation.

KENNERTIUM W-10

Alloy Digest ◽  
1962 ◽  
Vol 11 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Density ◽  
Powder Metal

Abstract Kennertium W-10 is a high density alloy recommended for radioactive shielding, balancing and damping applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and creep. It also includes information on forming, heat treating, machining, joining, and powder metal forms. Filing Code: W-4. Producer or source: Kennametal Inc..

DURATECH PYROVAN HC

Alloy Digest ◽  
2008 ◽  
Vol 57 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Heat Treating ◽  
Powder Metal ◽  
Steel Company ◽  
Specialty Steel

Abstract DuraTech Pyrovan HC is air hardened and has a combination of strength, wear resistance, and toughness for use in blanking and sizing dies. The alloy is made by powder metallurgy. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on heat treating, machining, and powder metal forms. Filing Code: TS-667. Producer or source: Latrobe Specialty Steel Company.

ANCORSTEEL 2000

Alloy Digest ◽  
2010 ◽  
Vol 59 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Alloy Powder ◽  
Powder Metal ◽  
Metal Parts ◽  
Powder Production

Abstract Ancorsteel 2000 is a water atomized low-alloy powder metal containing Ni, Mo, and Mn and is useful in powder metal parts requiring greater hardenability. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. Ancorsteel grades are designed for powder metallurgy parts requiring densities exceeding 6.7 g/cm^3 (0.24 lb/in.^3). This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-157. Producer or source: Hoeganaes Corporation.

ANCORSTEEL 150 HP

Alloy Digest ◽  
2010 ◽  
Vol 59 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Production Process ◽  
Tensile Properties ◽  
Molten Steel ◽  
Powder Metal ◽  
Base Powder ◽  
Powder Production ◽  
Wide Range

Abstract Ancorsteel 150 HP is a good base powder for a wide range of hybrid alloy systems. In the powder production process used to make Ancorsteel, molten steel is atomized into irregular, homogeneous particles which are then annealed to produce uniform, dependable steel powders. Ancorsteel grades are designed for powder metallurgy parts requiring densities exceeding 6.7 g/cm^3 (0.24 lb/in.^3). This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on powder metal forms. Filing Code: CS-154. Producer or source: Hoeganaes Corporation.

ANCORSTEEL FD-4600A

Alloy Digest ◽  
2012 ◽  
Vol 61 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Performance ◽  
Heat Treating ◽  
Conventional Sinter ◽  
Powder Metal ◽  
Performance Requirements ◽  
Material Standard

Abstract Ancorsteel FD-4600A alloy is a water atomized alloy using conventional sinter-hardening to meet high performance requirements. It conforms to MPIF Material Standard 35, Material Designations FD-02XX. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating and powder metal forms. Filing Code: SA-657. Producer or source: Hoeganaes Corporation.

MICRO-MELT NCORR

Alloy Digest ◽  
2015 ◽  
Vol 64 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Heat Treating ◽  
Powder Metal ◽  
Good Corrosion Resistance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract Micro-Melt signifies powder metallurgy. The alloy is nonmagnetic with excellent tensile strength, ductility, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and powder metal forms. Filing Code: SS-1231. Producer or source: Carpenter Technology Corporation.

ZAMAK-7

Alloy Digest ◽  
1962 ◽  
Vol 11 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
New Jersey ◽  
Physical Properties ◽  
Tensile Properties ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloy

Abstract ZAMAK 7 is a zinc die casting alloy having superior castability. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Zn-8. Producer or source: New Jersey Zinc Company.

Sign in / Sign up

Export Citation Format

Share Document